The Ux500 variant has a 24-bit MMCIDATALENGTH register, as opposed to
the 16-bit one on the ARM version.
Acked-by: Linus Walleij <linus.wall...@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vinc...@stericsson.com>
---
drivers/mmc/host/mmci.c | 12 +++++++++---
1 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 3fca46d..6c8e41b 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -40,22 +40,27 @@ static unsigned int fmax = 515633;
* struct variant_data - MMCI variant-specific quirks
* @clkreg: default value for MCICLOCK register
* @clkreg_enable: enable value for MMCICLOCK register
+ * @datalength_bits: number of bits in the MMCIDATALENGTH register
*/
struct variant_data {
unsigned int clkreg;
unsigned int clkreg_enable;
+ unsigned int datalength_bits;
};
static struct variant_data variant_arm = {
+ .datalength_bits = 16,
};
static struct variant_data variant_u300 = {
.clkreg_enable = 1 << 13, /* HWFCEN */
+ .datalength_bits = 16,
};
static struct variant_data variant_ux500 = {
.clkreg = MCI_CLK_ENABLE,
.clkreg_enable = 1 << 14, /* HWFCEN */
+ .datalength_bits = 24,
};
/*
* This must be called with host->lock held
@@ -700,10 +705,11 @@ static int __devinit mmci_probe(struct amba_device *dev,
struct amba_id *id)
mmc->max_phys_segs = NR_SG;
/*
- * Since we only have a 16-bit data length register, we must
- * ensure that we don't exceed 2^16-1 bytes in a single request.
+ * Since only a certain number of bits are valid in the data length
+ * register, we must ensure that we don't exceed 2^num-1 bytes in a
+ * single request.
*/
- mmc->max_req_size = 65535;
+ mmc->max_req_size = (1 << variant->datalength_bits) - 1;
/*
* Set the maximum segment size. Since we aren't doing DMA
--
1.7.0
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
