From: Jerry Huang <chang-ming.hu...@freescale.com>
Add auto CMD12 command support for eSDHC driver.
This is needed by P4080 and P1022 for block read/write.
Manual asynchronous CMD12 abort operation causes protocol violations on
these silicons.
Signed-off-by: Jerry Huang <chang-ming.hu...@freescale.com>
Signed-off-by: Roy Zang <tie-fei.z...@freescale.com>
---
drivers/mmc/host/sdhci-of-core.c | 4 ++++
drivers/mmc/host/sdhci.c | 14 ++++++++++++--
drivers/mmc/host/sdhci.h | 3 +++
3 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of-core.c b/drivers/mmc/host/sdhci-of-core.c
index a2e9820..0c30242 100644
--- a/drivers/mmc/host/sdhci-of-core.c
+++ b/drivers/mmc/host/sdhci-of-core.c
@@ -154,6 +154,10 @@ static int __devinit sdhci_of_probe(struct of_device
*ofdev,
host->ops = &sdhci_of_data->ops;
}
+ if (of_get_property(np, "fsl,sdhci-auto-cmd12", NULL))
+ host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+
+
if (of_get_property(np, "sdhci,1-bit-only", NULL))
host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c6d1bd8..1424d08 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2,6 +2,7 @@
* linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface
driver
*
* Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
+ * Copyright 2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -817,8 +818,12 @@ static void sdhci_set_transfer_mode(struct sdhci_host
*host,
WARN_ON(!host->data);
mode = SDHCI_TRNS_BLK_CNT_EN;
- if (data->blocks > 1)
- mode |= SDHCI_TRNS_MULTI;
+ if (data->blocks > 1) {
+ if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
+ mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_ACMD12;
+ else
+ mode |= SDHCI_TRNS_MULTI;
+ }
if (data->flags & MMC_DATA_READ)
mode |= SDHCI_TRNS_READ;
if (host->flags & SDHCI_REQ_USE_DMA)
@@ -1108,6 +1113,11 @@ static void sdhci_request(struct mmc_host *mmc, struct
mmc_request *mrq)
#ifndef SDHCI_USE_LEDS_CLASS
sdhci_activate_led(host);
#endif
+ if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
+ if (mrq->stop) {
+ mrq->data->stop = NULL;
+ mrq->stop = NULL;
+ }
host->mrq = mrq;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index c846813..aa112aa 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -2,6 +2,7 @@
* linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface
driver
*
* Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
+ * Copyright 2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -240,6 +241,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
/* Controller cannot support End Attribute in NOP ADMA descriptor */
#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
+/* Controller uses Auto CMD12 command to stop the transfer */
+#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<27)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
