The patch titled
sdhci: add auto CMD12 support for eSDHC driver
has been added to the -mm tree. Its filename is
sdhci-add-auto-cmd12-support-for-esdhc-driver.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: sdhci: add auto CMD12 support for eSDHC driver
From: Jerry Huang <chang-ming.hu...@freescale.com>
Add auto CMD12 command support for eSDHC driver. This is needed by P4080
and P1022 for block read/write. Manual asynchronous CMD12 abort operation
causes protocol violations on these silicons.
Signed-off-by: Jerry Huang <chang-ming.hu...@freescale.com>
Signed-off-by: Roy Zang <tie-fei.z...@freescale.com>
Cc: Benjamin Herrenschmidt <b...@kernel.crashing.org>
Cc: Kumar Gala <ga...@gate.crashing.org>
Cc: Grant Likely <grant.lik...@secretlab.ca>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <a...@linux-foundation.org>
---
drivers/mmc/host/sdhci-of-core.c | 4 ++++
drivers/mmc/host/sdhci.c | 14 ++++++++++++--
drivers/mmc/host/sdhci.h | 2 ++
3 files changed, 18 insertions(+), 2 deletions(-)
diff -puN
drivers/mmc/host/sdhci-of-core.c~sdhci-add-auto-cmd12-support-for-esdhc-driver
drivers/mmc/host/sdhci-of-core.c
---
a/drivers/mmc/host/sdhci-of-core.c~sdhci-add-auto-cmd12-support-for-esdhc-driver
+++ a/drivers/mmc/host/sdhci-of-core.c
@@ -154,6 +154,10 @@ static int __devinit sdhci_of_probe(stru
host->ops = &sdhci_of_data->ops;
}
+ if (of_get_property(np, "sdhci,auto-cmd12", NULL))
+ host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+
+
if (of_get_property(np, "sdhci,1-bit-only", NULL))
host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
diff -puN
drivers/mmc/host/sdhci.c~sdhci-add-auto-cmd12-support-for-esdhc-driver
drivers/mmc/host/sdhci.c
--- a/drivers/mmc/host/sdhci.c~sdhci-add-auto-cmd12-support-for-esdhc-driver
+++ a/drivers/mmc/host/sdhci.c
@@ -820,8 +820,12 @@ static void sdhci_set_transfer_mode(stru
WARN_ON(!host->data);
mode = SDHCI_TRNS_BLK_CNT_EN;
- if (data->blocks > 1)
- mode |= SDHCI_TRNS_MULTI;
+ if (data->blocks > 1) {
+ if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
+ mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_ACMD12;
+ else
+ mode |= SDHCI_TRNS_MULTI;
+ }
if (data->flags & MMC_DATA_READ)
mode |= SDHCI_TRNS_READ;
if (host->flags & SDHCI_REQ_USE_DMA)
@@ -1109,6 +1113,12 @@ static void sdhci_request(struct mmc_hos
#ifndef SDHCI_USE_LEDS_CLASS
sdhci_activate_led(host);
#endif
+ if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) {
+ if (mrq->stop) {
+ mrq->data->stop = NULL;
+ mrq->stop = NULL;
+ }
+ }
host->mrq = mrq;
diff -puN
drivers/mmc/host/sdhci.h~sdhci-add-auto-cmd12-support-for-esdhc-driver
drivers/mmc/host/sdhci.h
--- a/drivers/mmc/host/sdhci.h~sdhci-add-auto-cmd12-support-for-esdhc-driver
+++ a/drivers/mmc/host/sdhci.h
@@ -247,6 +247,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_NO_HISPD_BIT (1<<27)
/* Controller is missing device caps. Use caps provided by host */
#define SDHCI_QUIRK_MISSING_CAPS (1<<28)
+/* Controller uses Auto CMD12 command to stop the transfer */
+#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<29)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
_
Patches currently in -mm which might be from chang-ming.hu...@freescale.com are
sdhci-add-auto-cmd12-support-for-esdhc-driver.patch
dts-add-sdhciauto-cmd12-field-for-p4080-device-tree.patch
dts-add-esdhc-weird-voltage-bits-workaround.patch
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
