Hi Michal, Thanks for your comment.
> -----Original Message----- > From: Michał Mirosław [mailto:mir...@gmail.com] > Sent: Wednesday, September 01, 2010 11:40 AM > To: Chris Ball > Cc: Bing Zhao; linux-mmc@vger.kernel.org; Nicolas Pitre; Andrew Morton > Subject: Re: [PATCH] sdio: add MMC_PM_SKIP_RESUME_PROBE to workaround powered > resume > > 2010/8/27 Chris Ball <c...@laptop.org>: > > Any comments on this patch from the list? > > > > From: Bing Zhao <bz...@marvell.com> > > Date: Wed, 21 Jul 2010 18:46:55 -0700 > > > > Marvell 8686/8688 device will not respond to re-probe attemps > > in powered resume, if the card is in sleep mode. > > The added MMC_PM_SKIP_RESUME_PROBE flag is checked so that > > call to mmc_sdio_init_card() can be skipped. > [patch cut] > > Simplified SDIO spec v.2.00 (section 6.14 - Bus State Diagram) > suggests, that initialization commands (CMD5, CMD3) are not accepted > in CMD state. As the card stays in that state on powered suspend (no > resetting CMD52 nor power cycle is issued) then reinitialization > should be entirely skipped on resume unless the power was lost between > suspend and resume (or card was temporarily removed from the slot). With that said, skipping initialization on powered resume is needed in general. We can just check MMC_PM_KEEP_POWER flag to skip the card initialization. I will send the updated patch. Regards, Bing > > Best Regards, > Michał Mirosław -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
