Kukjin Kim wrote: > > + /* > > + * If controller does not have internal clock divider, > > + * we need to use another method with setup a quirk. > > + */ > > + if (pdata->clk_type) > > + host->quirks |= SDHCI_QUIRK_NONSTANDARD_CLOCK; > > + > > + if (pdata->host_caps) > > + host->mmc->caps |= pdata->host_caps; > > + > > If you want to add above feature, please separate it...
Okay, I'll make this patch to two things. Thanks, Jeongbae Seo > -----Original Message----- > From: Kukjin Kim [mailto:kgene....@samsung.com] > Sent: Friday, September 17, 2010 10:22 AM > To: 'Jeongbae Seo'; linux-arm-ker...@lists.infradead.org; linux-samsung- > s...@vger.kernel.org; linux-mmc@vger.kernel.org > Cc: ben-li...@fluff.org; a...@linux-foundation.org; 'Hyuk Lee'; 'Chris > Ball' > Subject: RE: [PATCH 5/5] sdhci-s3c: Add support no internal clock divider > in host controller > > Jeongbae Seo wrote: > > > > From: Hyuk Lee <hyuk1....@samsung.com> > > > > This patch adds to support no internal clock divider in SDHCI. > > The external clock divider can be used to make a proper clock > > because SDHCI doesn't support internal clock divider by itself. > > > Hi, > > Please add Chris Ball <c...@laptop.org> who is a maintainer of MMC > subsystem > in Cc later. > > > Signed-off-by: Hyuk Lee <hyuk1....@samsung.com> > > Signed-off-by: Jeongbae Seo <jeongbae....@samsung.com> > > --- > > drivers/mmc/host/sdhci-s3c.c | 63 > > ++++++++++++++++++++++++++++++++++++++++++ > > 1 files changed, 63 insertions(+), 0 deletions(-) > > > > diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c > > index 71ad416..6160960 100644 > > --- a/drivers/mmc/host/sdhci-s3c.c > > +++ b/drivers/mmc/host/sdhci-s3c.c > > @@ -96,6 +96,13 @@ static unsigned int sdhci_s3c_get_max_clk(struct > > sdhci_host *host) > > unsigned int rate, max; > > int clk; > > > > + /* > > + * There is only one clock source(sclk) if there is no clock > divider > > + * in the host controller > > + */ > > + if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) > > + return clk_round_rate(ourhost->clk_bus[2], UINT_MAX); > > + > > /* note, a reset will reset the clock source */ > > > > sdhci_s3c_check_sclk(host); > > @@ -130,6 +137,15 @@ static unsigned int sdhci_s3c_consider_clock(struct > > sdhci_s3c *ourhost, > > if (!clksrc) > > return UINT_MAX; > > > > + /* > > + * There is only one clock source(sclk) if there is no clock > divider > > + * in the host controller > > + */ > > + if (ourhost->host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) { > > + rate = clk_round_rate(clksrc, wanted); > > + return wanted - rate; > > + } > > + > > rate = clk_get_rate(clksrc); > > > > for (div = 1; div < 256; div *= 2) { > > @@ -159,6 +175,7 @@ static void sdhci_s3c_set_clock(struct sdhci_host > *host, > > unsigned int clock) > > int best_src = 0; > > int src; > > u32 ctrl; > > + unsigned int timeout; > > > > /* don't bother if the clock is going off. */ > > if (clock == 0) > > @@ -204,6 +221,35 @@ static void sdhci_s3c_set_clock(struct sdhci_host > *host, > > unsigned int clock) > > (ourhost->pdata->cfg_card)(ourhost->pdev, host- > > >ioaddr, > > &ios, NULL); > > } > > + > > + /* > > + * There is only one clock source(sclk) if there is no clock > divider > > + * in the host controller > > + */ > > + if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) { > > + writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); > > + clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock); > > + > > + writew(SDHCI_CLOCK_INT_EN, host->ioaddr + > > SDHCI_CLOCK_CONTROL); > > + > > + /* Wait max 20 ms */ > > + timeout = 20; > > + while (!((sdhci_readw(host, SDHCI_CLOCK_CONTROL)) > > + & SDHCI_CLOCK_INT_STABLE)) { > > + if (timeout == 0) { > > + printk(KERN_ERR "%s: clock never > > stabilised.\n" > > + , mmc_hostname(host- > > >mmc)); > > + return; > > + } > > + timeout--; > > + mdelay(1); > > + } > > + > > + writew(SDHCI_CLOCK_INT_EN | SDHCI_CLOCK_CARD_EN, > > + host->ioaddr + SDHCI_CLOCK_CONTROL); > > + > > + host->clock = clock; > > + } > > } > > > > /** > > @@ -221,6 +267,13 @@ static unsigned int sdhci_s3c_get_min_clock(struct > > sdhci_host *host) > > unsigned int delta, min = UINT_MAX; > > int src; > > > > + /* > > + * There is only one clock source(sclk) if there is no clock > divider > > + * in the host controller > > + */ > > + if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) > > + return clk_round_rate(ourhost->clk_bus[2], 400000); > > + > > for (src = 0; src < MAX_BUS_CLK; src++) { > > delta = sdhci_s3c_consider_clock(ourhost, src, 0); > > if (delta == UINT_MAX) > > @@ -425,6 +478,16 @@ static int __devinit sdhci_s3c_probe(struct > > platform_device *pdev) > > /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */ > > host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK; > > > > + /* > > + * If controller does not have internal clock divider, > > + * we need to use another method with setup a quirk. > > + */ > > + if (pdata->clk_type) > > + host->quirks |= SDHCI_QUIRK_NONSTANDARD_CLOCK; > > + > > + if (pdata->host_caps) > > + host->mmc->caps |= pdata->host_caps; > > + > > If you want to add above feature, please separate it... > > (snip) > > Thanks. > > Best regards, > Kgene. > -- > Kukjin Kim <kgene....@samsung.com>, Senior Engineer, > SW Solution Development Team, Samsung Electronics Co., Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
