The omap4 es2 hsmmc has a updated soft reset logic.After the
reset is issued monitor a 0->1 transition first. The reset of
CMD or DATA lines is complete only after a 0->1->0 transition
of SRC or SRD bits.
Signed-off-by: Madhusudhan Chikkature <madhu...@ti.com>
Tested-by: Anand Gadiyar <gadi...@ti.com>
---
arch/arm/mach-omap2/hsmmc.c | 3 +++
arch/arm/plat-omap/include/plat/mmc.h | 1 +
drivers/mmc/host/omap_hsmmc.c | 11 +++++++++++
3 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 87ce6ff..37f9f56 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -298,6 +298,9 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info
*controllers)
else
mmc->slots[0].features |= HSMMC_HAS_PBIAS;
+ if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0))
+ mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET;
+
switch (c->mmc) {
case 1:
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
diff --git a/arch/arm/plat-omap/include/plat/mmc.h
b/arch/arm/plat-omap/include/plat/mmc.h
index 4f819fc..2c4629a 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -103,6 +103,7 @@ struct omap_mmc_platform_data {
/* we can put the features above into this variable */
#define HSMMC_HAS_PBIAS (1 << 0)
+#define HSMMC_HAS_UPDATED_RESET (1 << 1)
unsigned features;
int switch_pin; /* gpio (card detect) */
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 53f8fa5..69858e7 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -982,6 +982,17 @@ static inline void omap_hsmmc_reset_controller_fsm(struct
omap_hsmmc_host *host,
OMAP_HSMMC_WRITE(host->base, SYSCTL,
OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
+ /*
+ * OMAP4 ES2 and greater has an updated reset logic.
+ * Monitor a 0->1 transition first
+ */
+ if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
+ while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit))
+ && (i++ < limit))
+ cpu_relax();
+ }
+ i = 0;
+
while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
(i++ < limit))
cpu_relax();
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
