Hello Richard,
On Fri, Sep 24, 2010 at 11:54:25AM +0800, Richard Zhu wrote:
> Modify the machine specific codes and add the eSDHC1 and eSDHC2 support
> on MX51 BBG platform.
> IOMUX, CLOCK, register the device.
>
> Signed-off-by: Richard Zhu <r65...@freescale.com>
> ---
> arch/arm/mach-mx5/board-mx51_babbage.c | 38 ++++++
I think board changes should go in a seperate patch
> arch/arm/mach-mx5/clock-mx51.c | 193
> +++++++++++++++++++++++++++
> arch/arm/mach-mx5/devices.c | 46 +++++++
> arch/arm/mach-mx5/devices.h | 2 +
> arch/arm/plat-mxc/include/mach/iomux-mx51.h | 33 +++--
> 5 files changed, 298 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c
> b/arch/arm/mach-mx5/board-mx51_babbage.c
> index 6e384d9..e79f8a1 100644
> --- a/arch/arm/mach-mx5/board-mx51_babbage.c
> +++ b/arch/arm/mach-mx5/board-mx51_babbage.c
> @@ -17,6 +17,7 @@
> #include <linux/delay.h>
> #include <linux/io.h>
> #include <linux/fsl_devices.h>
> +#include <linux/sdhci-pltfm.h>
>
> #include <mach/common.h>
> #include <mach/hardware.h>
> @@ -24,6 +25,7 @@
> #include <mach/iomux-mx51.h>
> #include <mach/i2c.h>
> #include <mach/mxc_ehci.h>
> +#include <mach/mmc.h>
>
> #include <asm/irq.h>
> #include <asm/setup.h>
> @@ -33,6 +35,8 @@
>
> #include "devices.h"
>
> +#define BABBAGE_SDHCI1_WP (0*32 + 1) /* GPIO_1_1 */
> +#define BABBAGE_SDHCI2_WP (0*32 + 5) /* GPIO_1_5 */
> #define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */
> #define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */
> #define BABBAGE_PHY_RESET (1*32 +5) /* GPIO_2_5 */
> @@ -93,6 +97,24 @@ static struct pad_desc mx51babbage_pads[] = {
>
> /* USB HUB reset line*/
> MX51_PAD_GPIO_1_7__GPIO_1_7,
> +
> + /* SDHCI1 IOMUX */
> + MX51_PAD_SD1_CMD__SD1_CMD,
> + MX51_PAD_SD1_CLK__SD1_CLK,
> + MX51_PAD_SD1_DATA0__SD1_DATA0,
> + MX51_PAD_SD1_DATA1__SD1_DATA1,
> + MX51_PAD_SD1_DATA2__SD1_DATA2,
> + MX51_PAD_SD1_DATA3__SD1_DATA3,
> + MX51_PAD_GPIO_1_1__GPIO_1_1,
> +
> + /* SDHCI2 IOMUX */
> + MX51_PAD_SD2_CMD__SD2_CMD,
> + MX51_PAD_SD2_CLK__SD2_CLK,
> + MX51_PAD_SD2_DATA0__SD2_DATA0,
> + MX51_PAD_SD2_DATA1__SD2_DATA1,
> + MX51_PAD_SD2_DATA2__SD2_DATA2,
> + MX51_PAD_SD2_DATA3__SD2_DATA3,
> + MX51_PAD_GPIO_1_5__GPIO_1_5,
> };
>
> /* Serial ports */
> @@ -240,6 +262,20 @@ static int __init babbage_otg_mode(char *options)
> }
> __setup("otg_mode=", babbage_otg_mode);
>
> +struct sdhci_pltfm_data mmc1_data = {
> + /* Board specified max bus width */
> + .caps = MMC_CAP_4_BIT_DATA,
> + /* GPIO pin number that used as the Write Protect */
This sentence no (complete) verb.
> + .wp_gpio = BABBAGE_SDHCI1_WP,
> +};
> +
> +struct sdhci_pltfm_data mmc2_data = {
> + /* Board specified max bus width */
> + .caps = MMC_CAP_4_BIT_DATA,
> + /* GPIO pin number that used as the Write Protect */
> + .wp_gpio = BABBAGE_SDHCI2_WP,
> +};
> +
> /*
> * Board specific initialization.
> */
> @@ -255,6 +291,8 @@ static void __init mxc_board_init(void)
> mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data);
> mxc_register_device(&mxc_i2c_device1, &babbage_i2c_data);
> mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
> + mxc_register_device(&mxcsdhc1_device, &mmc1_data);
> + mxc_register_device(&mxcsdhc2_device, &mmc2_data);
>
> if (otg_mode_host)
> mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
> diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
> index 6af69de..3526fd3 100644
> --- a/arch/arm/mach-mx5/clock-mx51.c
> +++ b/arch/arm/mach-mx5/clock-mx51.c
> @@ -41,6 +41,35 @@ static struct clk usboh3_clk;
>
> #define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
>
> +static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
> +{
Can we have a comment please about what this function does?
> + u32 min_pre, temp_pre, old_err, err;
> +
> + if (div >= 512) {
> + *pre = 8;
> + *post = 64;
> + } else if (div >= 8) {
declare the variables here please.
> + min_pre = (div - 1) / 64 + 1;
> + old_err = 8;
> + for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
> + err = div % temp_pre;
> + if (err == 0) {
> + *pre = temp_pre;
> + break;
> + }
> + err = temp_pre - err;
> + if (err < old_err) {
> + old_err = err;
> + *pre = temp_pre;
> + }
> + }
> + *post = (div + *pre - 1) / *pre;
> + } else if (div < 8) {
This if is unnecessary as the else branch is only hit if !(div >= 8)
> + *pre = div;
> + *post = 1;
> + }
> +}
> +
> static int _clk_ccgr_enable(struct clk *clk)
> {
> u32 reg;
> @@ -762,6 +791,160 @@ static struct clk kpp_clk = {
> .id = 0,
> };
>
> +static int _clk_esdhc1_set_parent(struct clk *clk, struct clk *parent)
> +{
> + u32 reg, mux;
> + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk,
> + &pll3_sw_clk, &lp_apm_clk);
> + reg = __raw_readl(MXC_CCM_CSCMR1) &
> + ~MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK;
> + reg |= mux << MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET;
> + __raw_writel(reg, MXC_CCM_CSCMR1);
> +
> + return 0;
> +}
> +
> +static unsigned long _clk_esdhc1_get_rate(struct clk *clk)
> +{
> + u32 reg, prediv, podf;
> + unsigned long parent_rate;
> +
> + parent_rate = clk_get_rate(clk->parent);
> +
> + reg = __raw_readl(MXC_CCM_CSCDR1);
> + prediv = ((reg & MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK) >>
> + MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET) + 1;
> + podf = ((reg & MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK) >>
> + MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET) + 1;
> +
> + return parent_rate / (prediv * podf);
> +}
> +
> +static int _clk_esdhc1_set_rate(struct clk *clk, unsigned long rate)
> +{
> + u32 reg, div, parent_rate;
> + u32 pre = 0, post = 0;
> +
> + parent_rate = clk_get_rate(clk->parent);
> + div = parent_rate / rate;
> +
> + if ((parent_rate / div) != rate)
> + return -EINVAL;
> +
> + __calc_pre_post_dividers(div, &pre, &post);
> +
> + /* Set sdhc1 clock divider */
> + reg = __raw_readl(MXC_CCM_CSCDR1) &
> + ~(MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK
> + | MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK);
> + reg |= (post - 1) << MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET;
> + reg |= (pre - 1) << MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET;
> + __raw_writel(reg, MXC_CCM_CSCDR1);
> +
> + return 0;
> +}
> +
> +static struct clk esdhc1_clk[] = {
> + {
> + .id = 0,
> + .parent = &pll2_sw_clk,
> + .secondary = &esdhc1_clk[1],
> + .enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
> + .enable_reg = MXC_CCM_CCGR3,
> + .get_rate = _clk_esdhc1_get_rate,
> + .set_rate = _clk_esdhc1_set_rate,
> + .enable = _clk_max_enable,
> + .disable = _clk_max_disable,
> + .set_parent = _clk_esdhc1_set_parent,
> + },
> + {
> + .id = 0,
> + .parent = &ipg_clk,
> + .secondary = NULL,
> + .enable = _clk_max_enable,
> + .enable_reg = MXC_CCM_CCGR3,
> + .enable_shift = MXC_CCM_CCGRx_CG0_OFFSET,
> + .disable = _clk_max_disable,
> + }
> +};
> +
> +static int _clk_esdhc2_set_parent(struct clk *clk, struct clk *parent)
> +{
> + u32 reg, mux;
> +
> + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk,
> + &pll3_sw_clk, &lp_apm_clk);
> + reg = __raw_readl(MXC_CCM_CSCMR1) &
> + ~MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK;
> + reg |= mux << MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET;
> +
> + __raw_writel(reg, MXC_CCM_CSCMR1);
Maybe it's time to make this idiom a function and call this? Something
like
static void sensiblefuncname(struct clk *parent, ...)
{
u32 mux = _get_mux(...);
reg = __raw_readl(offset) & ~mask;
reg |= mux << __ffs(mask);
__raw_writel(reg, offset);
}
What do you think?
> + return 0;
> +}
> +
> +static unsigned long _clk_esdhc2_get_rate(struct clk *clk)
> +{
> + u32 reg, prediv, podf;
> + unsigned long parent_rate;
> +
> + parent_rate = clk_get_rate(clk->parent);
> +
> + reg = __raw_readl(MXC_CCM_CSCDR1);
> + prediv = ((reg & MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK) >>
> + MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET) + 1;
> + podf = ((reg & MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK) >>
> + MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET) + 1;
> +
> + return parent_rate / (prediv * podf);
Maybe round here?
> +}
> +
> +static int _clk_esdhc2_set_rate(struct clk *clk, unsigned long rate)
> +{
> + u32 reg, div, parent_rate;
> + u32 pre = 0, post = 0;
> +
> + parent_rate = clk_get_rate(clk->parent);
> + div = parent_rate / rate;
> + if ((parent_rate / div) != rate)
> + return -EINVAL;
> +
> + __calc_pre_post_dividers(div, &pre, &post);
> +
> + /* Set sdhc1 clock divider */
> + reg = __raw_readl(MXC_CCM_CSCDR1) &
> + ~(MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK
> + | MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK);
> + reg |= (post - 1) << MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET;
> + reg |= (pre - 1) << MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET;
> + __raw_writel(reg, MXC_CCM_CSCDR1);
> +
> + return 0;
I havn't checked, but I assume the functions _clk_esdhc1_set_rate and
_clk_esdhc2_set_rate can share some code?
> +}
> +
> +static struct clk esdhc2_clk[] = {
> + {
> + .id = 1,
> + .parent = &pll2_sw_clk,
> + .secondary = &esdhc2_clk[1],
> + .enable_shift = MXC_CCM_CCGRx_CG3_OFFSET,
> + .enable_reg = MXC_CCM_CCGR3,
> + .get_rate = _clk_esdhc2_get_rate,
> + .set_rate = _clk_esdhc2_set_rate,
> + .enable = _clk_max_enable,
> + .disable = _clk_max_disable,
> + .set_parent = _clk_esdhc2_set_parent,
> + },
> + {
> + .id = 1,
> + .parent = &ipg_clk,
> + .secondary = NULL,
> + .enable_shift = MXC_CCM_CCGRx_CG2_OFFSET,
> + .enable_reg = MXC_CCM_CCGR3,
> + .enable = _clk_max_enable,
> + .disable = _clk_max_disable,
> + }
> +};
> +
> #define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \
> static struct clk name = { \
> .id = i, \
> @@ -837,6 +1020,8 @@ static struct clk_lookup lookups[] = {
> _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
> _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
> _REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
> + _REGISTER_CLOCK("imx-sdhci.0", "imx_sdhc_clk", esdhc1_clk[0])
> + _REGISTER_CLOCK("imx-sdhci.1", "imx_sdhc_clk", esdhc2_clk[0])
Is the string needed here?
> };
>
> static void clk_tree_init(void)
> @@ -880,6 +1065,14 @@ int __init mx51_clocks_init(unsigned long ckil,
> unsigned long osc,
> /* set the usboh3_clk parent to pll2_sw_clk */
> clk_set_parent(&usboh3_clk, &pll2_sw_clk);
>
> + /* Set SDHC parents to be PLL2 */
> + clk_set_parent(&esdhc1_clk[0], &pll2_sw_clk);
> + clk_set_parent(&esdhc2_clk[0], &pll2_sw_clk);
> +
> + /* set SDHC root clock as 166.25MHZ*/
> + clk_set_rate(&esdhc1_clk[0], 166250000);
> + clk_set_rate(&esdhc2_clk[0], 166250000);
> +
> /* System timer */
> mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
> MX51_MXC_INT_GPT);
> diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
> index 1920ff4..c137b36 100644
> --- a/arch/arm/mach-mx5/devices.c
> +++ b/arch/arm/mach-mx5/devices.c
> @@ -245,6 +245,52 @@ struct platform_device mxc_keypad_device = {
> .resource = mxc_kpp_resources,
> };
>
> +static struct resource mxcsdhc1_resources[] = {
> + {
> + .start = MX51_MMC_SDHC1_BASE_ADDR,
> + .end = MX51_MMC_SDHC1_BASE_ADDR + SZ_4K - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .start = MX51_MXC_INT_MMC_SDHC1,
> + .end = MX51_MXC_INT_MMC_SDHC1,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct resource mxcsdhc2_resources[] = {
> + {
> + .start = MX51_MMC_SDHC2_BASE_ADDR,
> + .end = MX51_MMC_SDHC2_BASE_ADDR + SZ_4K - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .start = MX51_MXC_INT_MMC_SDHC2,
> + .end = MX51_MXC_INT_MMC_SDHC2,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> + struct platform_device mxcsdhc1_device = {
> + .name = "imx-sdhci",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(mxcsdhc1_resources),
> + .resource = mxcsdhc1_resources,
> + .dev = {
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> +};
> +
> + struct platform_device mxcsdhc2_device = {
> + .name = "imx-sdhci",
> + .id = 1,
> + .num_resources = ARRAY_SIZE(mxcsdhc2_resources),
> + .resource = mxcsdhc2_resources,
> + .dev = {
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> +};
> +
I would prefer using dynamic creation of these devices. See Sascha's
for-2.6.37 branch
> static struct mxc_gpio_port mxc_gpio_ports[] = {
> {
> .chip.label = "gpio-0",
> diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
> index e509cfa..21b9a6f 100644
> --- a/arch/arm/mach-mx5/devices.h
> +++ b/arch/arm/mach-mx5/devices.h
> @@ -10,3 +10,5 @@ extern struct platform_device mxc_i2c_device0;
> extern struct platform_device mxc_i2c_device1;
> extern struct platform_device mxc_hsi2c_device;
> extern struct platform_device mxc_keypad_device;
> +extern struct platform_device mxcsdhc1_device;
> +extern struct platform_device mxcsdhc2_device;
> diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
> b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
> index 21bfa46..8963852 100644
> --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
> +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
> @@ -45,6 +45,9 @@ typedef enum iomux_config {
> PAD_CTL_PKE | PAD_CTL_HYS)
> #define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \
> PAD_CTL_SRE_FAST)
> +#define MX51_SDHCI_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \
> + PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_SRE_FAST | \
> + PAD_CTL_DVS)
>
> /*
> * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
> @@ -294,20 +297,22 @@ typedef enum iomux_config {
> #define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0,
> 0x0, 0, NO_PAD_CTRL)
> #define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0,
> 0x0, 0, NO_PAD_CTRL)
> #define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0,
> 0x0, 0, NO_PAD_CTRL)
> -#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0,
> 0x0, 0, NO_PAD_CTRL)
> -#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0,
> 0x0, 0, NO_PAD_CTRL)
> -#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0,
> 0x0, 0, NO_PAD_CTRL)
> -#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0,
> 0x0, 0, NO_PAD_CTRL)
> -#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0,
> 0x0, 0, NO_PAD_CTRL)
> -#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0,
> 0x0, 0, NO_PAD_CTRL)
> +#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394,
> IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHCI_PAD_CTRL)
> +#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398,
> IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHCI_PAD_CTRL \
> + | PAD_CTL_HYS)
Please align the IOMUX_PAD, and there is a space before the tab in the
definition of MX51_PAD_SD1_CLK__SD1_CLK.
> +#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C,
> IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHCI_PAD_CTRL)
> +#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0,
> IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHCI_PAD_CTRL)
> +#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4,
> IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHCI_PAD_CTRL)
> +#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8,
> IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHCI_PAD_CTRL)
> #define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0,
> 0, NO_PAD_CTRL)
> -#define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0,
> 0, NO_PAD_CTRL)
> -#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0,
> 0x0, 0, NO_PAD_CTRL)
> -#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, 0,
> 0x0, 0, NO_PAD_CTRL)
> -#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, 0,
> 0x0, 0, NO_PAD_CTRL)
> -#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, 0,
> 0x0, 0, NO_PAD_CTRL)
> -#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, 0,
> 0x0, 0, NO_PAD_CTRL)
> -#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, 0,
> 0x0, 0, NO_PAD_CTRL)
> +#define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0,
> IOMUX_CONFIG_GPIO, 0x0, 0, MX51_SDHCI_PAD_CTRL)
> +#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4,
> IOMUX_CONFIG_SION, 0x0, 1, MX51_SDHCI_PAD_CTRL)
> +#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8,
> IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHCI_PAD_CTRL \
> + | PAD_CTL_HYS)
> +#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC,
> IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHCI_PAD_CTRL)
> +#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0,
> IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHCI_PAD_CTRL)
> +#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4,
> IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHCI_PAD_CTRL)
> +#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8,
> IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHCI_PAD_CTRL)
> #define MX51_PAD_GPIO_1_2__GPIO_1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0,
> 0, NO_PAD_CTRL)
> #define MX51_PAD_GPIO_1_2__I2C2_SCL IOMUX_PAD(0x7D4, 0x3CC, (2 |
> IOMUX_CONFIG_SION), \
> 0x9b8, 3,
> MX51_I2C_PAD_CTRL)
> @@ -316,7 +321,7 @@ typedef enum iomux_config {
> 0x9bc, 3,
> MX51_I2C_PAD_CTRL)
> #define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0,
> 0, NO_PAD_CTRL)
> #define MX51_PAD_GPIO_1_4__GPIO_1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0,
> 0, NO_PAD_CTRL)
> -#define MX51_PAD_GPIO_1_5__GPIO_1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0,
> 0, NO_PAD_CTRL)
> +#define MX51_PAD_GPIO_1_5__GPIO_1_5 IOMUX_PAD(0x808, 0x3DC,
> IOMUX_CONFIG_GPIO, 0x0, 1, MX51_SDHCI_PAD_CTRL)
> #define MX51_PAD_GPIO_1_6__GPIO_1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0,
> 0, MX51_GPIO_PAD_CTRL)
> #define MX51_PAD_GPIO_1_7__GPIO_1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0,
> 0, MX51_GPIO_PAD_CTRL)
> #define MX51_PAD_GPIO_1_8__GPIO_1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0,
> 1, MX51_GPIO_PAD_CTRL)
> --
> 1.7.0
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
