SDHCI host controller has TRIM/ERASE capability, enable these caps for erasing
purpose.
ERASE command needs R1B response. So for such command with busy signal, before
sending command, SDHCI host driver will simply set a maximum value for timeout
control register which is safe to use.
Signed-off-by: Chuanxiao Dong <chuanxiao.d...@intel.com>
---
drivers/mmc/host/sdhci.c | 16 +++++++++++-----
1 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 655617c..fe7cbd0 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -41,7 +41,6 @@
static unsigned int debug_quirks = 0;
-static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *);
static void sdhci_finish_data(struct sdhci_host *);
static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
@@ -652,16 +651,23 @@ static void sdhci_set_transfer_irqs(struct sdhci_host
*host)
sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
}
-static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
+static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command
*cmd)
{
u8 count;
u8 ctrl;
+ struct mmc_data *data = cmd->data;
int ret;
WARN_ON(host->data);
- if (data == NULL)
+ if (data == NULL) {
+ /*
+ * set timeout to be maximum value for command with busy signal.
+ */
+ if (cmd->flags & MMC_RSP_BUSY)
+ sdhci_writeb(host, 0xE, SDHCI_TIMEOUT_CONTROL);
return;
+ }
/* Sanity checks */
BUG_ON(data->blksz * data->blocks > 524288);
@@ -921,7 +927,7 @@ static void sdhci_send_command(struct sdhci_host *host,
struct mmc_command *cmd)
host->cmd = cmd;
- sdhci_prepare_data(host, cmd->data);
+ sdhci_prepare_data(host, cmd);
sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
@@ -1939,7 +1945,7 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
mmc->f_max = host->max_clk;
- mmc->caps |= MMC_CAP_SDIO_IRQ;
+ mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE;
/*
* A controller may support 8-bit width, but the board itself
--
1.6.6.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
