> -----Original Message-----
> From: linux-mmc-ow...@vger.kernel.org [mailto:linux-mmc-
> ow...@vger.kernel.org] On Behalf Of Arindam Nath
> Sent: Friday, March 04, 2011 5:03 PM
> To: c...@laptop.org
> Cc: zhangfei....@gmail.com; prak...@marvell.com;
> subha...@codeaurora.org; linux-mmc@vger.kernel.org; henry...@amd.com;
> aaron...@amd.com; anath....@gmail.com; Arindam Nath
> Subject: [PATCH v2 03/12] mmc: sd: query function modes for uhs cards
>
> SD cards which conform to Physical Layer Spec v3.01 can support
> additional Bus Speed Modes, Driver Strength, and Current Limit
> other than the default values. We use CMD6 mode 0 to read these
> additional card functions. The values read here will be used
> during UHS-I initialization steps.
>
> Signed-off-by: Arindam Nath <arindam.n...@amd.com>
> ---
> drivers/mmc/core/sd.c | 99
> +++++++++++++++++++++++++++++++++++++++-------
> include/linux/mmc/card.h | 3 +
> 2 files changed, 87 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> index 3e82599..a63956b 100644
> --- a/drivers/mmc/core/sd.c
> +++ b/drivers/mmc/core/sd.c
> @@ -283,25 +283,94 @@ static int mmc_read_switch(struct mmc_card *card)
> return -ENOMEM;
> }
>
> - err = mmc_sd_switch(card, 0, 0, 1, status);
> - if (err) {
> - /* If the host or the card can't do the switch,
> - * fail more gracefully. */
> - if ((err != -EINVAL)
> - && (err != -ENOSYS)
> - && (err != -EFAULT))
> + if (card->scr.sda_spec3) {
> + /* First find out the supported Bus Speed Modes. */
> + err = mmc_sd_switch(card, 0, 0, 1, status);
Reading function-group-1 status applies for both SD3.0 and SD2.0 cards as
well. With card->scr.sda_spec check, you are duplicating the same code in
else part of it as well. You can optimize it to only one call to
mmc_sd_switch() to read function-group-1.
> + if (err) {
> + /*
> + * If the host or the card can't do the switch,
> + * fail more gracefully.
> + */
> + if ((err != -EINVAL)
> + && (err != -ENOSYS)
> + && (err != -EFAULT))
> + goto out;
> +
> + printk(KERN_WARNING "%s: problem reading "
> + "Bus Speed modes.\n",
> + mmc_hostname(card->host));
> + err = 0;
> +
> goto out;
> + }
>
> - printk(KER N_WARNING "%s: problem reading switch "
> - "capabilities, performance might suffer.\n",
> - mmc_hostname(card->host));
> - err = 0;
> + card->sw_caps.uhs_bus_mode = status[13];
Is adding uhs* prefix is appropriate? If card supports SD3.0 spec means card
have to support UHS modes? Can we have cards (SDXC?) which sets SD3.0 spec
bit in SCR but does not support any of the UHS modes. So in this case
putting uhs* prefix might not be appropriate.
> +
> + /* Find out Driver Strengths supported by the card */
> + err = mmc_sd_switch(card, 0, 2, 1, status);
> + if (err) {
> + /*
> + * If the host or the card can't do the switch,
> + * fail more gracefully.
> + */
> + if ((err != -EINVAL)
> + && (err != -ENOSYS)
> + && (err != -EFAULT))
> + goto out;
> +
> + printk(KERN_WARNING "%s: problem reading "
> + "Driver Strength.\n",
> + mmc_hostname(card->host));
> + err = 0;
>
> - goto out;
> - }
> + goto out;
> + }
>
> - if (status[13] & 0x02)
> - card->sw_caps.hs_max_dtr = 50000000;
> + card->sw_caps.uhs_drv_type = status[9];
> +
> + /* Find out Current Limits supported by the card */
> + err = mmc_sd_switch(card, 0, 3, 1, status);
> + if (err) {
> + /*
> + * If the host or the card can't do the switch,
> + * fail more gracefully.
> + */
> + if ((err != -EINVAL)
> + && (err != -ENOSYS)
> + && (err != -EFAULT))
> + goto out;
> +
> + printk(KERN_WARNING "%s: problem reading "
> + "Current Limit.\n",
> + mmc_hostname(card->host));
> + err = 0;
> +
> + goto out;
> + }
> +
> + card->sw_caps.uhs_curr_limit = status[7];
> + } else {
> + err = mmc_sd_switch(card, 0, 0, 1, status);
> + if (err) {
> + /*
> + * If the host or the card can't do the switch,
> + * fail more gracefully.
> + */
> + if ((err != -EINVAL)
> + && (err != -ENOSYS)
> + && (err != -EFAULT))
> + goto out;
> +
> + printk(KERN_WARNING "%s: problem reading switch "
> + "capabilities, performance might suffer.\n",
> + mmc_hostname(card->host));
> + err = 0;
> + goto out;
> + }
> +
> + if (status[13] & 0x02)
> + card->sw_caps.hs_max_dtr = 50000000;
> + }
>
> out:
> kfree(status);
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index 22b0335..7080f22 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -75,6 +75,9 @@ struct sd_ssr {
>
> struct sd_switch_caps {
> unsigned int hs_max_dtr;
> + unsigned int uhs_bus_mode;
> + unsigned int uhs_drv_type;
> + unsigned int uhs_curr_limit;
> };
>
> struct sdio_cccr {
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
