Allows appropriately-privileged applications to send CMD (normal) and
ACMD (application-specific; preceded with CMD55) commands to
cards/devices on the mmc bus. This is primarily useful for enabling the
security functionality built in to every SD card.
It can also be used as a generic passthrough (e.g. to enable virtual
machines to control mmc bus devices directly). However, this use case
has not been tested rigorously. Generic passthrough testing was only
conducted for a few non-security opcodes to prove the feasibility of the
passthrough.
Since any opcode can be sent using this passthrough, it is very possible
to render the card/device unusable. Applications that use this ioctl
must have CAP_SYS_RAWIO.
Security commands tested on TI PCIxx12 (SDHCI), Sigma Designs SMP8652
SoC, TI OMAP3621 SoC, TI OMAP3630 SoC, Samsung S5PC110 SoC, Qualcomm
MSM7200A SoC.
Signed-off-by: John Calixto <john.cali...@modsystems.com>
Reviewed-by: Andrei Warkentin <andr...@motorola.com>
---
drivers/mmc/card/block.c | 201 +++++++++++++++++++++++++++++++++++++++++++++
drivers/mmc/core/sd_ops.c | 3 +-
include/linux/Kbuild | 1 +
include/linux/mmc/Kbuild | 1 +
include/linux/mmc/core.h | 1 +
include/linux/mmc/ioctl.h | 46 ++++++++++
6 files changed, 252 insertions(+), 1 deletions(-)
create mode 100644 include/linux/mmc/Kbuild
create mode 100644 include/linux/mmc/ioctl.h
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 61d233a..19b7bb1 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -31,7 +31,11 @@
#include <linux/mutex.h>
#include <linux/scatterlist.h>
#include <linux/string_helpers.h>
+#include <linux/delay.h>
+#include <linux/capability.h>
+#include <linux/compat.h>
+#include <linux/mmc/ioctl.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
@@ -158,11 +162,208 @@ mmc_blk_getgeo(struct block_device *bdev, struct
hd_geometry *geo)
return 0;
}
+struct mmc_blk_ioc_data {
+ struct mmc_ioc_cmd ic;
+ unsigned char *buf;
+ u64 buf_bytes;
+ void __user *buf_user;
+};
+
+static struct mmc_blk_ioc_data *mmc_blk_ioctl_copy_from_user(
+ struct mmc_ioc_cmd __user *user)
+{
+ struct mmc_blk_ioc_data *idata;
+ int err;
+
+ idata = kzalloc(sizeof(*idata), GFP_KERNEL);
+ if (!idata) {
+ err = -ENOMEM;
+ goto copy_err;
+ }
+
+ if (copy_from_user(&idata->ic, user, sizeof(idata->ic))) {
+ err = -EFAULT;
+ goto copy_err;
+ }
+
+ idata->buf_bytes = (u64) idata->ic.blksz * idata->ic.blocks;
+ if (idata->buf_bytes > MMC_IOC_MAX_BYTES) {
+ err = -EOVERFLOW;
+ goto copy_err;
+ }
+
+ idata->buf = kzalloc(idata->buf_bytes, GFP_KERNEL);
+ if (!idata->buf) {
+ err = -ENOMEM;
+ goto copy_err;
+ }
+
+ memcpy(&idata->buf_user, &idata->ic.data_ptr, idata->ic.data_ptr_size);
+ if (copy_from_user(idata->buf, idata->buf_user, idata->buf_bytes)) {
+ err = -EFAULT;
+ goto copy_err;
+ }
+
+ return idata;
+
+copy_err:
+ kfree(idata->buf);
+ kfree(idata);
+ return ERR_PTR(err);
+
+}
+
+static int mmc_blk_ioctl_cmd(struct block_device *bdev,
+ struct mmc_ioc_cmd __user *ic_ptr)
+{
+ struct mmc_blk_ioc_data *idata;
+ struct mmc_blk_data *md;
+ struct mmc_card *card;
+ struct mmc_command cmd = {0};
+ struct mmc_data data = {0};
+ struct mmc_request mrq = {0};
+ struct scatterlist sg;
+ int err;
+
+ /*
+ * The caller must have CAP_SYS_RAWIO, and must be calling this on the
+ * whole block device, not on a partition. This prevents overspray
+ * between sibling partitions.
+ */
+ if ((!capable(CAP_SYS_RAWIO)) || (bdev != bdev->bd_contains))
+ return -EPERM;
+
+ idata = mmc_blk_ioctl_copy_from_user(ic_ptr);
+ if (IS_ERR(idata))
+ return PTR_ERR(idata);
+
+ cmd.opcode = idata->ic.opcode;
+ cmd.arg = idata->ic.arg;
+ cmd.flags = idata->ic.flags;
+
+ data.sg = &sg;
+ data.sg_len = 1;
+ data.blksz = idata->ic.blksz;
+ data.blocks = idata->ic.blocks;
+
+ sg_init_one(data.sg, idata->buf, idata->buf_bytes);
+
+ if (idata->ic.write_flag)
+ data.flags = MMC_DATA_WRITE;
+ else
+ data.flags = MMC_DATA_READ;
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ md = mmc_blk_get(bdev->bd_disk);
+ if (!md) {
+ err = -EINVAL;
+ goto cmd_done;
+ }
+
+ card = md->queue.card;
+ if (IS_ERR(card)) {
+ err = PTR_ERR(card);
+ goto cmd_done;
+ }
+
+ mmc_claim_host(card->host);
+
+ if (idata->ic.is_acmd) {
+ err = mmc_app_cmd(card->host, card);
+ if (err)
+ goto cmd_rel_host;
+ }
+
+ /* data.flags must already be set before doing this. */
+ mmc_set_data_timeout(&data, card);
+ /* Allow overriding the timeout_ns for empirical tuning. */
+ if (idata->ic.data_timeout_ns)
+ data.timeout_ns = idata->ic.data_timeout_ns;
+
+ if ((cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
+ /*
+ * Pretend this is a data transfer and rely on the host driver
+ * to compute timeout. When all host drivers support
+ * cmd.cmd_timeout for R1B, this can be changed to:
+ *
+ * mrq.data = NULL;
+ * cmd.cmd_timeout = idata->ic.cmd_timeout_ms;
+ */
+ data.timeout_ns = idata->ic.cmd_timeout_ms * 1000000;
+ }
+
+ mmc_wait_for_req(card->host, &mrq);
+
+ if (cmd.error) {
+ dev_err(mmc_dev(card->host), "%s: cmd error %d\n",
+ __func__, cmd.error);
+ err = cmd.error;
+ goto cmd_rel_host;
+ }
+ if (data.error) {
+ dev_err(mmc_dev(card->host), "%s: data error %d\n",
+ __func__, data.error);
+ err = data.error;
+ goto cmd_rel_host;
+ }
+
+ /*
+ * According to the SD specs, some commands require a delay after
+ * issuing the command.
+ */
+ if (idata->ic.postsleep_min_us)
+ usleep_range(idata->ic.postsleep_min_us,
idata->ic.postsleep_max_us);
+
+ if (copy_to_user(&(ic_ptr->response), cmd.resp, sizeof(cmd.resp))) {
+ err = -EFAULT;
+ goto cmd_rel_host;
+ }
+
+ if (!idata->ic.write_flag) {
+ if (copy_to_user(idata->buf_user, idata->buf,
idata->buf_bytes)) {
+ err = -EFAULT;
+ goto cmd_rel_host;
+ }
+ }
+
+cmd_rel_host:
+ mmc_release_host(card->host);
+
+cmd_done:
+ mmc_blk_put(md);
+ kfree(idata->buf);
+ kfree(idata);
+ return err;
+}
+
+static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret = -EINVAL;
+ if (cmd == MMC_IOC_CMD)
+ ret = mmc_blk_ioctl_cmd(bdev, (struct mmc_ioc_cmd __user *)arg);
+ return ret;
+}
+
+#ifdef CONFIG_COMPAT
+static int mmc_blk_compat_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
+{
+ return mmc_blk_ioctl(bdev, mode, cmd, (unsigned long) compat_ptr(arg));
+}
+#endif
+
static const struct block_device_operations mmc_bdops = {
.open = mmc_blk_open,
.release = mmc_blk_release,
.getgeo = mmc_blk_getgeo,
.owner = THIS_MODULE,
+ .ioctl = mmc_blk_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = mmc_blk_compat_ioctl,
+#endif
};
struct mmc_blk_request {
diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index 797cdb5..990dd43 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -20,7 +20,7 @@
#include "core.h"
#include "sd_ops.h"
-static int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
+int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
{
int err;
struct mmc_command cmd;
@@ -48,6 +48,7 @@ static int mmc_app_cmd(struct mmc_host *host, struct mmc_card
*card)
return 0;
}
+EXPORT_SYMBOL_GPL(mmc_app_cmd);
/**
* mmc_wait_for_app_cmd - start an application command and wait for
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 75cf611..ed38527 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -4,6 +4,7 @@ header-y += caif/
header-y += dvb/
header-y += hdlc/
header-y += isdn/
+header-y += mmc/
header-y += nfsd/
header-y += raid/
header-y += spi/
diff --git a/include/linux/mmc/Kbuild b/include/linux/mmc/Kbuild
new file mode 100644
index 0000000..1fb2644
--- /dev/null
+++ b/include/linux/mmc/Kbuild
@@ -0,0 +1 @@
+header-y += ioctl.h
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 07f27af..bfc6127 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -133,6 +133,7 @@ struct mmc_card;
extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
+extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *);
extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
struct mmc_command *, int);
diff --git a/include/linux/mmc/ioctl.h b/include/linux/mmc/ioctl.h
new file mode 100644
index 0000000..ad6a871
--- /dev/null
+++ b/include/linux/mmc/ioctl.h
@@ -0,0 +1,46 @@
+#ifndef _MMC_IOCTL_H
+#define _MMC_IOCTL_H
+struct mmc_ioc_cmd {
+ /* Implies direction of data. true = write, false = read */
+ int write_flag;
+
+ /* Application-specific command. true = precede with CMD55 */
+ int is_acmd;
+
+ __u32 opcode;
+ __u32 arg;
+ __u32 response[4]; /* CMD response */
+ unsigned int flags;
+ unsigned int blksz;
+ unsigned int blocks;
+
+ /*
+ * Sleep at least postsleep_min_us useconds, and at most
+ * postsleep_max_us useconds *after* issuing command. Needed for some
+ * read commands for which cards have no other way of indicating
+ * they're ready for the next command (i.e. there is no equivalent of a
+ * "busy" indicator for read operations).
+ */
+ unsigned int postsleep_min_us;
+ unsigned int postsleep_max_us;
+
+ /*
+ * Override driver-computed timeouts. Note the difference in units!
+ */
+ unsigned int data_timeout_ns;
+ unsigned int cmd_timeout_ms;
+
+ /* DAT buffer */
+ __u32 data_ptr_size; /* size of the *pointer* */
+ __u64 data_ptr;
+};
+#define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)
+
+/*
+ * Since this ioctl is only meant to enhance (and not replace) normal access to
+ * the mmc bus device, an upper data transfer limit of MMC_IOC_MAX_BYTES is
+ * enforced per ioctl call. For larger data transfers, use the normal block
+ * device operations.
+ */
+#define MMC_IOC_MAX_BYTES (512L * 256)
+#endif /* _MMC_IOCTL_H */
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
