Chris,
This is the reason why I did the other patch for bus width testing ! Some hardware does not work. Philip On May 19, 2011, at 11:53 AM, Chris Ball wrote: > Hi Philip, > > On Fri, Jan 21 2011, Philip Rakity wrote: >> The PXA family of controllers (PXA168/PXA910/MMP2) support CMD14/CMD19 >> transactions that are used to test the MMC/eMMC bus width for 1, 4, or >> 8 bits. >> >> Indicate to the mmc layer that it is safe to do bus width testing. >> >> Signed-off-by: Philip Rakity <[email protected]> >> --- >> drivers/mmc/host/sdhci-pxa.c | 3 +++ >> 1 files changed, 3 insertions(+), 0 deletions(-) >> >> diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c >> index ed044a8..0afc763 100644 >> --- a/drivers/mmc/host/sdhci-pxa.c >> +++ b/drivers/mmc/host/sdhci-pxa.c >> @@ -121,6 +121,9 @@ static int __devinit sdhci_pxa_probe(struct >> platform_device *pdev) >> host->irq = irq; >> host->quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; >> >> + /* enable mmc bus width testing */ >> + host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST; >> + >> /* If slot design supports 8 bit data, indicate this to MMC. */ >> if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) >> host->mmc->caps |= MMC_CAP_8_BIT_DATA; > > This patch causes a 10 second boot time delay here, on XO-1.75/MMP2: > > [ 625.245478] Waiting for root device /dev/mmcblk0p2... > [ 634.877598] mmc2: Timeout waiting for hardware interrupt. > [ 634.882966] sdhci: =========== REGISTER DUMP (mmc2)=========== > [ 634.888756] sdhci: Sys addr: 0x1cfc7864 | Version: 0x00000002 > [ 634.888756] sdhci: Blk size: 0x00007004 | Blk cnt: 0x00000000 > [ 634.894544] sdhci: Argument: 0x00000000 | Trn mode: 0x00000003 > [ 634.900334] sdhci: Present: 0x01fa0000 | Host ctl: 0x00000007 > [ 634.911913] sdhci: Power: 0x0000000b | Blk gap: 0x00000000 > [ 634.911913] sdhci: Wake-up: 0x00000000 | Clock: 0x00000207 > [ 634.917703] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 > [ 634.929283] sdhci: Int enab: 0x02ff000b | Sig enab: 0x02ff000b > [ 634.929283] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 > [ 634.935071] sdhci: Caps: 0x25fcc8b2 | Caps_1: 0x00002f77 > [ 634.940861] sdhci: Cmd: 0x0000133a | Max curr: 0x00000000 > [ 634.946651] sdhci: Host ctl2: 0x00000000 > [ 634.952438] sdhci: =========================================== > [ 634.962269] mmc2: new high speed DDR MMC card at address 0001 > > Everything seems to work after the delay, though. Any ideas? > Doesn't seem to happen with CONFIG_MMC_DEBUG=y. > (Maybe you can test on an XO?) > > Thanks, > > - Chris. > -- > Chris Ball <[email protected]> <http://printf.net/> > One Laptop Per Child -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
