Thomas Abraham wrote:
>
> The sdhci platform helper function that sets up the default controller
> configuration is removed for all Samsung platforms since such default
> controller configuration can be handled by the driver.
>
> Cc: Ben Dooks <ben-li...@fluff.org>
> Signed-off-by: Thomas Abraham <thomas.abra...@linaro.org>
> ---
> arch/arm/mach-exynos4/setup-sdhci.c | 47 -----------------------
> arch/arm/mach-s3c2416/setup-sdhci.c | 37 ------------------
> arch/arm/mach-s3c64xx/setup-sdhci.c | 48 -----------------------
> arch/arm/mach-s5pc100/setup-sdhci.c | 42 --------------------
> arch/arm/mach-s5pv210/setup-sdhci.c | 41 --------------------
> arch/arm/plat-samsung/dev-hsmmc.c | 2 -
> arch/arm/plat-samsung/dev-hsmmc1.c | 2 -
> arch/arm/plat-samsung/dev-hsmmc2.c | 2 -
> arch/arm/plat-samsung/dev-hsmmc3.c | 2 -
> arch/arm/plat-samsung/include/plat/sdhci.h | 57
----------------------------
> 10 files changed, 0 insertions(+), 280 deletions(-)
>
> diff --git a/arch/arm/mach-exynos4/setup-sdhci.c
b/arch/arm/mach-exynos4/setup-
> sdhci.c
> index 1e83f8c..92937b4 100644
> --- a/arch/arm/mach-exynos4/setup-sdhci.c
> +++ b/arch/arm/mach-exynos4/setup-sdhci.c
> @@ -10,16 +10,7 @@
> * published by the Free Software Foundation.
> */
>
> -#include <linux/kernel.h>
> #include <linux/types.h>
> -#include <linux/interrupt.h>
> -#include <linux/platform_device.h>
> -#include <linux/io.h>
> -
> -#include <linux/mmc/card.h>
> -#include <linux/mmc/host.h>
> -
> -#include <plat/regs-sdhci.h>
>
> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
>
> @@ -29,41 +20,3 @@ char *exynos4_hsmmc_clksrcs[4] = {
> [2] = "sclk_mmc", /* mmc_bus */
> [3] = NULL,
> };
> -
> -void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void
__iomem
> *r,
> - struct mmc_ios *ios, struct mmc_card
*card)
> -{
> - u32 ctrl2, ctrl3;
> -
> - /* don't need to alter anything according to card-type */
> -
> - ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
> -
> - /* select base clock source to HCLK */
> -
> - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
> -
> - /*
> - * clear async mode, enable conflict mask, rx feedback ctrl, SD
> - * clk hold and no use debounce count
> - */
> -
> - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
> - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
> - S3C_SDHCI_CTRL2_ENFBCLKRX |
> - S3C_SDHCI_CTRL2_DFCNT_NONE |
> - S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
> -
> - /* Tx and Rx feedback clock delay control */
> -
> - if (ios->clock < 25 * 1000000)
> - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
> - S3C_SDHCI_CTRL3_FCSEL2 |
> - S3C_SDHCI_CTRL3_FCSEL1 |
> - S3C_SDHCI_CTRL3_FCSEL0);
> - else
> - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 |
> S3C_SDHCI_CTRL3_FCSEL0);
> -
> - writel(ctrl2, r + S3C_SDHCI_CONTROL2);
> - writel(ctrl3, r + S3C_SDHCI_CONTROL3);
> -}
> diff --git a/arch/arm/mach-s3c2416/setup-sdhci.c
b/arch/arm/mach-s3c2416/setup-
> sdhci.c
> index ed34fad..cee5395 100644
> --- a/arch/arm/mach-s3c2416/setup-sdhci.c
> +++ b/arch/arm/mach-s3c2416/setup-sdhci.c
> @@ -12,17 +12,7 @@
> * published by the Free Software Foundation.
> */
>
> -#include <linux/kernel.h>
> #include <linux/types.h>
> -#include <linux/interrupt.h>
> -#include <linux/platform_device.h>
> -#include <linux/io.h>
> -
> -#include <linux/mmc/card.h>
> -#include <linux/mmc/host.h>
> -
> -#include <plat/regs-sdhci.h>
> -#include <plat/sdhci.h>
>
> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
>
> @@ -32,30 +22,3 @@ char *s3c2416_hsmmc_clksrcs[4] = {
> [2] = "hsmmc-if",
> /* [3] = "48m", - note not successfully used yet */
> };
> -
> -void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
> - void __iomem *r,
> - struct mmc_ios *ios,
> - struct mmc_card *card)
> -{
> - u32 ctrl2, ctrl3;
> -
> - ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2);
> - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
> - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
> - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
> - S3C_SDHCI_CTRL2_ENFBCLKRX |
> - S3C_SDHCI_CTRL2_DFCNT_NONE |
> - S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
> -
> - if (ios->clock < 25 * 1000000)
> - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
> - S3C_SDHCI_CTRL3_FCSEL2 |
> - S3C_SDHCI_CTRL3_FCSEL1 |
> - S3C_SDHCI_CTRL3_FCSEL0);
> - else
> - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 |
> S3C_SDHCI_CTRL3_FCSEL0);
> -
> - __raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2);
> - __raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3);
> -}
> diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c
b/arch/arm/mach-s3c64xx/setup-
> sdhci.c
> index f344a22..c75a71b 100644
> --- a/arch/arm/mach-s3c64xx/setup-sdhci.c
> +++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
> @@ -12,17 +12,7 @@
> * published by the Free Software Foundation.
> */
>
> -#include <linux/kernel.h>
> #include <linux/types.h>
> -#include <linux/interrupt.h>
> -#include <linux/platform_device.h>
> -#include <linux/io.h>
> -
> -#include <linux/mmc/card.h>
> -#include <linux/mmc/host.h>
> -
> -#include <plat/regs-sdhci.h>
> -#include <plat/sdhci.h>
>
> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
>
> @@ -32,41 +22,3 @@ char *s3c64xx_hsmmc_clksrcs[4] = {
> [2] = "mmc_bus",
> /* [3] = "48m", - note not successfully used yet */
> };
> -
> -void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
> - void __iomem *r,
> - struct mmc_ios *ios,
> - struct mmc_card *card)
> -{
> - u32 ctrl2, ctrl3;
> -
> - ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
> - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
> - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
> - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
> - S3C_SDHCI_CTRL2_ENFBCLKRX |
> - S3C_SDHCI_CTRL2_DFCNT_NONE |
> - S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
> -
> - if (ios->clock < 25 * 1000000)
> - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
> - S3C_SDHCI_CTRL3_FCSEL2 |
> - S3C_SDHCI_CTRL3_FCSEL1 |
> - S3C_SDHCI_CTRL3_FCSEL0);
> - else
> - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 |
> S3C_SDHCI_CTRL3_FCSEL0);
> -
> - pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
> - writel(ctrl2, r + S3C_SDHCI_CONTROL2);
> - writel(ctrl3, r + S3C_SDHCI_CONTROL3);
> -}
> -
> -void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
> - void __iomem *r,
> - struct mmc_ios *ios,
> - struct mmc_card *card)
> -{
> - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r +
> S3C64XX_SDHCI_CONTROL4);
> -
> - s3c6400_setup_sdhci_cfg_card(dev, r, ios, card);
> -}
> diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c
b/arch/arm/mach-s5pc100/setup-
> sdhci.c
> index be25879..6418c6e 100644
> --- a/arch/arm/mach-s5pc100/setup-sdhci.c
> +++ b/arch/arm/mach-s5pc100/setup-sdhci.c
> @@ -11,17 +11,7 @@
> * published by the Free Software Foundation.
> */
>
> -#include <linux/kernel.h>
> #include <linux/types.h>
> -#include <linux/interrupt.h>
> -#include <linux/platform_device.h>
> -#include <linux/io.h>
> -
> -#include <linux/mmc/card.h>
> -#include <linux/mmc/host.h>
> -
> -#include <plat/regs-sdhci.h>
> -#include <plat/sdhci.h>
>
> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
>
> @@ -31,35 +21,3 @@ char *s5pc100_hsmmc_clksrcs[4] = {
> [2] = "sclk_mmc", /* mmc_bus */
> /* [3] = "48m", - note not successfully used yet */
> };
> -
> -
> -void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
> - void __iomem *r,
> - struct mmc_ios *ios,
> - struct mmc_card *card)
> -{
> - u32 ctrl2, ctrl3;
> -
> - /* don't need to alter anything according to card-type */
> -
> - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r +
> S3C64XX_SDHCI_CONTROL4);
> -
> - ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
> - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
> - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
> - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
> - S3C_SDHCI_CTRL2_ENFBCLKRX |
> - S3C_SDHCI_CTRL2_DFCNT_NONE |
> - S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
> -
> - if (ios->clock < 25 * 1000000)
> - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
> - S3C_SDHCI_CTRL3_FCSEL2 |
> - S3C_SDHCI_CTRL3_FCSEL1 |
> - S3C_SDHCI_CTRL3_FCSEL0);
> - else
> - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 |
> S3C_SDHCI_CTRL3_FCSEL0);
> -
> - writel(ctrl2, r + S3C_SDHCI_CONTROL2);
> - writel(ctrl3, r + S3C_SDHCI_CONTROL3);
> -}
> diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c
b/arch/arm/mach-s5pv210/setup-
> sdhci.c
> index a83b6c9..6b8ccc4 100644
> --- a/arch/arm/mach-s5pv210/setup-sdhci.c
> +++ b/arch/arm/mach-s5pv210/setup-sdhci.c
> @@ -10,17 +10,7 @@
> * published by the Free Software Foundation.
> */
>
> -#include <linux/kernel.h>
> #include <linux/types.h>
> -#include <linux/interrupt.h>
> -#include <linux/platform_device.h>
> -#include <linux/io.h>
> -
> -#include <linux/mmc/card.h>
> -#include <linux/mmc/host.h>
> -
> -#include <plat/regs-sdhci.h>
> -#include <plat/sdhci.h>
>
> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
>
> @@ -30,34 +20,3 @@ char *s5pv210_hsmmc_clksrcs[4] = {
> [2] = "sclk_mmc", /* mmc_bus */
> /* [3] = NULL, - reserved */
> };
> -
> -void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
> - void __iomem *r,
> - struct mmc_ios *ios,
> - struct mmc_card *card)
> -{
> - u32 ctrl2, ctrl3;
> -
> - /* don't need to alter anything according to card-type */
> -
> - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r +
> S3C64XX_SDHCI_CONTROL4);
> -
> - ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
> - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
> - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
> - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
> - S3C_SDHCI_CTRL2_ENFBCLKRX |
> - S3C_SDHCI_CTRL2_DFCNT_NONE |
> - S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
> -
> - if (ios->clock < 25 * 1000000)
> - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
> - S3C_SDHCI_CTRL3_FCSEL2 |
> - S3C_SDHCI_CTRL3_FCSEL1 |
> - S3C_SDHCI_CTRL3_FCSEL0);
> - else
> - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 |
> S3C_SDHCI_CTRL3_FCSEL0);
> -
> - writel(ctrl2, r + S3C_SDHCI_CONTROL2);
> - writel(ctrl3, r + S3C_SDHCI_CONTROL3);
> -}
> diff --git a/arch/arm/plat-samsung/dev-hsmmc.c
b/arch/arm/plat-samsung/dev-
> hsmmc.c
> index db7a65c..5f15bf7 100644
> --- a/arch/arm/plat-samsung/dev-hsmmc.c
> +++ b/arch/arm/plat-samsung/dev-hsmmc.c
> @@ -70,8 +70,6 @@ void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata
*pd)
> set->max_width = pd->max_width;
> if (pd->cfg_gpio)
> set->cfg_gpio = pd->cfg_gpio;
> - if (pd->cfg_card)
> - set->cfg_card = pd->cfg_card;
> if (pd->host_caps)
> set->host_caps |= pd->host_caps;
> if (pd->clk_type)
> diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c
b/arch/arm/plat-samsung/dev-
> hsmmc1.c
> index 2497321..2249794 100644
> --- a/arch/arm/plat-samsung/dev-hsmmc1.c
> +++ b/arch/arm/plat-samsung/dev-hsmmc1.c
> @@ -70,8 +70,6 @@ void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata
*pd)
> set->max_width = pd->max_width;
> if (pd->cfg_gpio)
> set->cfg_gpio = pd->cfg_gpio;
> - if (pd->cfg_card)
> - set->cfg_card = pd->cfg_card;
> if (pd->host_caps)
> set->host_caps |= pd->host_caps;
> if (pd->clk_type)
> diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c
b/arch/arm/plat-samsung/dev-
> hsmmc2.c
> index f60aedb..58af1eb 100644
> --- a/arch/arm/plat-samsung/dev-hsmmc2.c
> +++ b/arch/arm/plat-samsung/dev-hsmmc2.c
> @@ -71,8 +71,6 @@ void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata
*pd)
> set->max_width = pd->max_width;
> if (pd->cfg_gpio)
> set->cfg_gpio = pd->cfg_gpio;
> - if (pd->cfg_card)
> - set->cfg_card = pd->cfg_card;
> if (pd->host_caps)
> set->host_caps |= pd->host_caps;
> if (pd->clk_type)
> diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c
b/arch/arm/plat-samsung/dev-
> hsmmc3.c
> index ede776f..bb44271 100644
> --- a/arch/arm/plat-samsung/dev-hsmmc3.c
> +++ b/arch/arm/plat-samsung/dev-hsmmc3.c
> @@ -74,8 +74,6 @@ void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata
*pd)
> set->max_width = pd->max_width;
> if (pd->cfg_gpio)
> set->cfg_gpio = pd->cfg_gpio;
> - if (pd->cfg_card)
> - set->cfg_card = pd->cfg_card;
> if (pd->host_caps)
> set->host_caps |= pd->host_caps;
> if (pd->clk_type)
> diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-
> samsung/include/plat/sdhci.h
> index 058e096..7f57173 100644
> --- a/arch/arm/plat-samsung/include/plat/sdhci.h
> +++ b/arch/arm/plat-samsung/include/plat/sdhci.h
> @@ -55,10 +55,6 @@ enum clk_types {
> * cd_type == S3C_SDHCI_CD_GPIO
> * @ext_cd_gpio_invert: invert values for external CD gpio line
> * @cfg_gpio: Configure the GPIO for a specific card bit-width
> - * @cfg_card: Configure the interface for a specific card and speed. This
> - * is necessary the controllers and/or GPIO blocks require the
> - * changing of driver-strength and other controls dependent on
> - * the card and speed of operation.
> *
> * Initialisation data specific to either the machine or the platform
> * for the device driver to use or call-back when configuring gpio or
> @@ -80,10 +76,6 @@ struct s3c_sdhci_platdata {
> int state));
>
> void (*cfg_gpio)(struct platform_device *dev, int width);
> - void (*cfg_card)(struct platform_device *dev,
> - void __iomem *regbase,
> - struct mmc_ios *ios,
> - struct mmc_card *card);
> };
>
> /**
> @@ -132,17 +124,11 @@ extern void exynos4_setup_sdhci3_cfg_gpio(struct
> platform_device *, int w);
> #ifdef CONFIG_S3C2416_SETUP_SDHCI
> extern char *s3c2416_hsmmc_clksrcs[4];
>
> -extern void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
> - void __iomem *r,
> - struct mmc_ios *ios,
> - struct mmc_card *card);
> -
> static inline void s3c2416_default_sdhci0(void)
> {
> #ifdef CONFIG_S3C_DEV_HSMMC
> s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
> s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
> - s3c_hsmmc0_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
> #endif /* CONFIG_S3C_DEV_HSMMC */
> }
>
> @@ -151,7 +137,6 @@ static inline void s3c2416_default_sdhci1(void)
> #ifdef CONFIG_S3C_DEV_HSMMC1
> s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
> s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
> - s3c_hsmmc1_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
> #endif /* CONFIG_S3C_DEV_HSMMC1 */
> }
>
> @@ -165,17 +150,11 @@ static inline void s3c2416_default_sdhci1(void) { }
> #ifdef CONFIG_S3C64XX_SETUP_SDHCI
> extern char *s3c64xx_hsmmc_clksrcs[4];
>
> -extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
> - void __iomem *r,
> - struct mmc_ios *ios,
> - struct mmc_card *card);
> -
> static inline void s3c6400_default_sdhci0(void)
> {
> #ifdef CONFIG_S3C_DEV_HSMMC
> s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
> s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
> - s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
> #endif
> }
>
> @@ -184,7 +163,6 @@ static inline void s3c6400_default_sdhci1(void)
> #ifdef CONFIG_S3C_DEV_HSMMC1
> s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
> s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
> - s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
> #endif
> }
>
> @@ -193,21 +171,14 @@ static inline void s3c6400_default_sdhci2(void)
> #ifdef CONFIG_S3C_DEV_HSMMC2
> s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
> s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
> - s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
> #endif
> }
>
> -extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
> - void __iomem *r,
> - struct mmc_ios *ios,
> - struct mmc_card *card);
> -
> static inline void s3c6410_default_sdhci0(void)
> {
> #ifdef CONFIG_S3C_DEV_HSMMC
> s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
> s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
> - s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
> #endif
> }
>
> @@ -216,7 +187,6 @@ static inline void s3c6410_default_sdhci1(void)
> #ifdef CONFIG_S3C_DEV_HSMMC1
> s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
> s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
> - s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
> #endif
> }
>
> @@ -225,7 +195,6 @@ static inline void s3c6410_default_sdhci2(void)
> #ifdef CONFIG_S3C_DEV_HSMMC2
> s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
> s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
> - s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
> #endif
> }
>
> @@ -244,17 +213,11 @@ static inline void s3c6400_default_sdhci2(void) { }
> #ifdef CONFIG_S5PC100_SETUP_SDHCI
> extern char *s5pc100_hsmmc_clksrcs[4];
>
> -extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
> - void __iomem *r,
> - struct mmc_ios *ios,
> - struct mmc_card *card);
> -
> static inline void s5pc100_default_sdhci0(void)
> {
> #ifdef CONFIG_S3C_DEV_HSMMC
> s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
> s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
> - s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
> #endif
> }
>
> @@ -263,7 +226,6 @@ static inline void s5pc100_default_sdhci1(void)
> #ifdef CONFIG_S3C_DEV_HSMMC1
> s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
> s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
> - s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
> #endif
> }
>
> @@ -272,7 +234,6 @@ static inline void s5pc100_default_sdhci2(void)
> #ifdef CONFIG_S3C_DEV_HSMMC2
> s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
> s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
> - s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
> #endif
> }
>
> @@ -288,17 +249,11 @@ static inline void s5pc100_default_sdhci2(void) { }
> #ifdef CONFIG_S5PV210_SETUP_SDHCI
> extern char *s5pv210_hsmmc_clksrcs[4];
>
> -extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
> - void __iomem *r,
> - struct mmc_ios *ios,
> - struct mmc_card *card);
> -
> static inline void s5pv210_default_sdhci0(void)
> {
> #ifdef CONFIG_S3C_DEV_HSMMC
> s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
> s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
> - s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
> #endif
> }
>
> @@ -307,7 +262,6 @@ static inline void s5pv210_default_sdhci1(void)
> #ifdef CONFIG_S3C_DEV_HSMMC1
> s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
> s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
> - s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
> #endif
> }
>
> @@ -316,7 +270,6 @@ static inline void s5pv210_default_sdhci2(void)
> #ifdef CONFIG_S3C_DEV_HSMMC2
> s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
> s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
> - s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
> #endif
> }
>
> @@ -325,7 +278,6 @@ static inline void s5pv210_default_sdhci3(void)
> #ifdef CONFIG_S3C_DEV_HSMMC3
> s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
> s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
> - s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
> #endif
> }
>
> @@ -341,17 +293,11 @@ static inline void s5pv210_default_sdhci3(void) { }
> #ifdef CONFIG_EXYNOS4_SETUP_SDHCI
> extern char *exynos4_hsmmc_clksrcs[4];
>
> -extern void exynos4_setup_sdhci_cfg_card(struct platform_device *dev,
> - void __iomem *r,
> - struct mmc_ios *ios,
> - struct mmc_card *card);
> -
> static inline void exynos4_default_sdhci0(void)
> {
> #ifdef CONFIG_S3C_DEV_HSMMC
> s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs;
> s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
> - s3c_hsmmc0_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
> #endif
> }
>
> @@ -360,7 +306,6 @@ static inline void exynos4_default_sdhci1(void)
> #ifdef CONFIG_S3C_DEV_HSMMC1
> s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs;
> s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
> - s3c_hsmmc1_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
> #endif
> }
>
> @@ -369,7 +314,6 @@ static inline void exynos4_default_sdhci2(void)
> #ifdef CONFIG_S3C_DEV_HSMMC2
> s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs;
> s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
> - s3c_hsmmc2_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
> #endif
> }
>
> @@ -378,7 +322,6 @@ static inline void exynos4_default_sdhci3(void)
> #ifdef CONFIG_S3C_DEV_HSMMC3
> s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs;
> s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
> - s3c_hsmmc3_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
> #endif
> }
>
> --
> 1.6.6.rc2
Hi Thomas,
The arch/arm/plat-samsung/dev-hsmmcX.c files have been changed due to commit
61e62fcb ("ARM: SAMSUNG: Consolidate common function to set SDHCI plat
data"). So if possible please make your patch based on latest my for-next :)
If any problems, please let me know.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene....@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
