On 04/11/11 09:16, Giuseppe CAVALLARO wrote:
> This patch is to expose the actual SDCLK frequency in
> /sys/kernel/debug/mmcX/ios entry.
>
> For example, if the max clk for a normal speed card is 20MHz
> this is reported in /sys/kernel/debug/mmcX/ios.
> Unfortunately the actual SDCLK frequency (i.e. Baseclock / divisor)
> is not reported at all: for example, in that case, on Arasan HC,
> it should be 48/4=12 (MHz).
>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavall...@st.com>
> ---
> drivers/mmc/core/debugfs.c | 2 ++
> drivers/mmc/host/sdhci.c | 9 +++++++++
> include/linux/mmc/host.h | 2 ++
> 3 files changed, 13 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
> index c3f24a7..688f4f8 100644
> --- a/drivers/mmc/core/debugfs.c
> +++ b/drivers/mmc/core/debugfs.c
> @@ -56,6 +56,8 @@ static int mmc_ios_show(struct seq_file *s, void *data)
> const char *str;
>
> seq_printf(s, "clock:\t\t%u Hz\n", ios->clock);
> + if (host->actual_clock)
> + seq_printf(s, "actual clock:\t%u Hz\n", host->actual_clock);
> seq_printf(s, "vdd:\t\t%u ", ios->vdd);
> if ((1 << ios->vdd) & MMC_VDD_165_195)
> seq_printf(s, "(1.65 - 1.95 V)\n");
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 6d8eea3..f801609 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1066,12 +1066,15 @@ static void sdhci_finish_command(struct sdhci_host
> *host)
> static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
> {
> int div = 0; /* Initialized for compiler warning */
> + int real_div = div, clk_mul = 1;
> u16 clk = 0;
> unsigned long timeout;
>
> if (clock == host->clock)
> return;
>
> + host->mmc->actual_clock = 0;
> +
> if (host->ops->set_clock) {
> host->ops->set_clock(host, clock);
> if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
> @@ -1109,6 +1112,8 @@ static void sdhci_set_clock(struct sdhci_host *host,
> unsigned int clock)
> * Control register.
> */
> clk = SDHCI_PROG_CLOCK_MODE;
> + real_div = div;
> + clk_mul = host->clk_mul;
> div--;
> }
> } else {
> @@ -1122,6 +1127,7 @@ static void sdhci_set_clock(struct sdhci_host *host,
> unsigned int clock)
> break;
> }
> }
> + real_div = div;
> div >>= 1;
> }
> } else {
> @@ -1130,9 +1136,12 @@ static void sdhci_set_clock(struct sdhci_host *host,
> unsigned int clock)
> if ((host->max_clk / div) <= clock)
> break;
> }
> + real_div = div;
> div >>= 1;
> }
>
> + host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div;
Still missing the "if (real_div)" from V3 but it is needed in one case
i.e. (ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)
> +
> clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
> clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
> << SDHCI_DIVIDER_HI_SHIFT;
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index a3ac9c4..cea064f 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -323,6 +323,8 @@ struct mmc_host {
> struct fault_attr fail_mmc_request;
> #endif
>
> + unsigned int actual_clock; /* Actual HC clock rate */
> +
> unsigned long private[0] ____cacheline_aligned;
> };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
