Hi Girish,
> -----Original Message-----
> From: linux-mmc-ow...@vger.kernel.org [mailto:linux-mmc-
> ow...@vger.kernel.org] On Behalf Of Girish K S
> Sent: Wednesday, October 26, 2011 10:30 AM
> To: linux-mmc@vger.kernel.org
> Cc: c...@laptop.org; patc...@linaro.org; linux-samsung-
> s...@vger.kernel.org; Girish K S
> Subject: [PATCH RESEND V4] mmc: core: HS200 mode support for eMMC 4.5
>
> This patch adds the support of the HS200 bus speed for eMMC 4.5
> devices.
> The eMMC 4.5 devices have support for 200MHz bus speed.The mmc core and
> host modules have been touched to add support for this module.
>
> It is necessary to know the card type in the sdhci.c file to add
> support
> for eMMC tuning function. So card.h file is included to import the card
> data structure.
We don't need to know the card type in the host controller driver if we pass
the command opcode as the 2nd argument to execute_tuning() ops. Command
opcode can have have either CMD19 or CMD21 as it's value depending on the
card type (whether it's SD3.0 card or eMMC4.5 card).
>
> cc: Chris Ball <c...@laptop.org>
> Signed-off-by: Girish K S <girish.shivananja...@linaro.org>
> ---
> Changes in v4:
> Rebased onto chris-mmc/mmc-next branch. This patch is
> successfully
> applied on commit with id
> de022ed3fdc14808299b2fa66dbb1ed5ab921912.
> Changes in v3:
> In the previous commits of chris-mmc/mmc-next branch, the patch
> with
> commit id (c0f22a2c92e357e7cb3988b0b13034d70b7461f9) defines
> caps2 for
> more capabilities. This patch version deletes the member
> ext_caps(created
> in my earlier patch) from struct mmc_host and reuses already
> accepted
> caps2 member.
> Changes in v2:
> Rebased to latest chris-mmc/mmc-next branch. Resolved indentation
> problems identified in review. This patch has to be applied
> before
> the patch released for modifying the printk messages.
> Changes in v1:
> Case statements in switch that produce same result have
> been combined to reduce repeated assignments.
> patch recreated after rebase to chris balls mmc-next branch.
>
> drivers/mmc/core/bus.c | 3 +-
> drivers/mmc/core/mmc.c | 92
> ++++++++++++++++++++++++++++++++++++++++----
> drivers/mmc/host/sdhci.c | 36 +++++++++++++++---
> include/linux/mmc/card.h | 3 +
> include/linux/mmc/host.h | 6 +++
> include/linux/mmc/mmc.h | 8 +++-
> include/linux/mmc/sdhci.h | 1 +
> 7 files changed, 132 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
> index 46b6e84..2f82f6b 100644
> --- a/drivers/mmc/core/bus.c
> +++ b/drivers/mmc/core/bus.c
> @@ -301,10 +301,11 @@ int mmc_add_card(struct mmc_card *card)
> mmc_card_ddr_mode(card) ? "DDR " : "",
> type);
> } else {
> - printk(KERN_INFO "%s: new %s%s%s card at address %04x\n",
> + pr_info("%s: new %s%s%s%s card at address %04x\n",
> mmc_hostname(card->host),
> mmc_sd_card_uhs(card) ? "ultra high speed " :
> (mmc_card_highspeed(card) ? "high speed " : ""),
> + (mmc_card_hs200(card) ? "HS200 " : ""),
> mmc_card_ddr_mode(card) ? "DDR " : "",
> type, card->rca);
> }
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 3627044..4db248c 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -285,6 +285,39 @@ static int mmc_read_ext_csd(struct mmc_card *card,
> u8 *ext_csd)
> }
> card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE];
> switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) {
> + case EXT_CSD_CARD_TYPE_SDR_200 |
> + EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> + case EXT_CSD_CARD_TYPE_SDR_200 | EXT_CSD_CARD_TYPE_DDR_1_8V |
> + EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> + case EXT_CSD_CARD_TYPE_SDR_200 | EXT_CSD_CARD_TYPE_DDR_1_2V |
> + EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> + case EXT_CSD_CARD_TYPE_SDR_200 | EXT_CSD_CARD_TYPE_DDR_52 |
> + EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> + card->ext_csd.hs_max_dtr = 200000000;
> + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_200;
> + break;
> + case EXT_CSD_CARD_TYPE_SDR_1_2V |
> + EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> + case EXT_CSD_CARD_TYPE_SDR_1_2V | EXT_CSD_CARD_TYPE_DDR_1_8V |
> + EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> + case EXT_CSD_CARD_TYPE_SDR_1_2V | EXT_CSD_CARD_TYPE_DDR_1_2V |
> + EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> + case EXT_CSD_CARD_TYPE_SDR_1_2V | EXT_CSD_CARD_TYPE_DDR_52 |
> + EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> + card->ext_csd.hs_max_dtr = 200000000;
> + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_2V;
> + break;
> + case EXT_CSD_CARD_TYPE_SDR_1_8V |
> + EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> + case EXT_CSD_CARD_TYPE_SDR_1_8V | EXT_CSD_CARD_TYPE_DDR_1_8V |
> + EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> + case EXT_CSD_CARD_TYPE_SDR_1_8V | EXT_CSD_CARD_TYPE_DDR_1_2V |
> + EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> + case EXT_CSD_CARD_TYPE_SDR_1_8V | EXT_CSD_CARD_TYPE_DDR_52 |
> + EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> + card->ext_csd.hs_max_dtr = 200000000;
> + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_8V;
> + break;
Can't we optimize this? This looks like too many case statements.
Basically we can have checks like this:
temp = ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK;
if ((temp & EXT_CSD_CARD_TYPE_SDR_1_2V == EXT_CSD_CARD_TYPE_SDR_1_2V) ||
(temp & EXT_CSD_CARD_TYPE_SDR_1_8V == EXT_CSD_CARD_TYPE_SDR_1_8V)) {
card->ext_csd.hs_max_dtr = 200000000;
card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_2V; /* we can have
some logic to identify the card type correctly */
}
> case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 |
> EXT_CSD_CARD_TYPE_26:
> card->ext_csd.hs_max_dtr = 52000000;
> @@ -699,6 +732,7 @@ static int mmc_init_card(struct mmc_host *host, u32
> ocr,
> {
> struct mmc_card *card;
> int err, ddr = 0;
> + int hs_sdr = 0;
> u32 cid[4];
> unsigned int max_dtr;
> u32 rocr;
> @@ -890,11 +924,15 @@ static int mmc_init_card(struct mmc_host *host,
> u32 ocr,
> /*
> * Activate high speed (if supported)
> */
> - if ((card->ext_csd.hs_max_dtr != 0) &&
> - (host->caps & MMC_CAP_MMC_HIGHSPEED)) {
> - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> - EXT_CSD_HS_TIMING, 1,
> - card->ext_csd.generic_cmd6_time);
> + if (card->ext_csd.hs_max_dtr != 0) {
We should enter into this if condition only if one of the this cap
(MMC_CAP2_HIGHSPEED_200 or MMC_CAP_MMC_HIGHSPEED) is set.
> + if ((card->ext_csd.hs_max_dtr > 52000000) &&
> + (host->caps2 & MMC_CAP2_HIGHSPEED_200))
> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> + EXT_CSD_HS_TIMING, 2, 0);
> + else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> + EXT_CSD_HS_TIMING, 1, 0);
> +
> if (err && err != -EBADMSG)
> goto free_card;
>
> @@ -903,7 +941,10 @@ static int mmc_init_card(struct mmc_host *host,
> u32 ocr,
> mmc_hostname(card->host));
> err = 0;
> } else {
> - mmc_card_set_highspeed(card);
> + if (card->ext_csd.hs_max_dtr > 52000000)
I think there should be AND condition with (host->caps2 &
MMC_CAP2_HIGHSPEED_200) for setting the card as HS200.
> + mmc_card_set_hs200(card);
> + else
> + mmc_card_set_highspeed(card);
> mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
As mentioned earlier, there should be new timing mode defined for HS200.
> }
> }
> @@ -929,7 +970,7 @@ static int mmc_init_card(struct mmc_host *host, u32
> ocr,
> */
> max_dtr = (unsigned int)-1;
>
> - if (mmc_card_highspeed(card)) {
> + if (mmc_card_highspeed(card) || mmc_card_hs200(card)) {
> if (max_dtr > card->ext_csd.hs_max_dtr)
> max_dtr = card->ext_csd.hs_max_dtr;
> } else if (max_dtr > card->csd.max_dtr) {
> @@ -955,6 +996,22 @@ static int mmc_init_card(struct mmc_host *host,
> u32 ocr,
> }
>
> /*
> + * Indicate HS200 SDR mode (if supported).
> + */
> + if (mmc_card_hs200(card)) {
> + if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V)
> + && ((host->caps2 & (MMC_CAP2_HS200_1_8V_SDR |
> + MMC_CAP2_HS200))
> + == (MMC_CAP2_HS200_1_8V_SDR |
MMC_CAP2_HS200)))
> + hs_sdr = MMC_1_8V_SDR_MODE;
> + else if ((card->ext_csd.card_type &
> EXT_CSD_CARD_TYPE_SDR_1_2V)
> + && ((host->caps2 & (MMC_CAP2_HS200_1_2V_SDR |
> + MMC_CAP2_HS200))
> + == (MMC_CAP2_HS200_1_2V_SDR |
MMC_CAP2_HS200)))
> + hs_sdr = MMC_1_2V_SDR_MODE;
> + }
> +
> + /*
> * Activate wide bus and DDR (if supported).
> */
> if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
> @@ -994,16 +1051,24 @@ static int mmc_init_card(struct mmc_host *host,
> u32 ocr,
> if (!err) {
> mmc_set_bus_width(card->host, bus_width);
>
> + if ((host->caps2 & MMC_CAP2_HS200) &&
> + card->host->ops->execute_tuning)
> + err = card->host->ops-> \
> + execute_tuning(card->host);
execute_tuning() should be executed immediately after the TIMING is changed
to HS200 and clock speed is changed to 200MHz. But here timing mode and
clock rate is changed and then you are also sending bus width change
command. As host controller timing tuning has not completed, this bus width
change command may fail with CMD/DATA CRC errors.
So basically this should be the sequence.
1. set the bus width depending on the host controller and card capability
2. If card support HS200 timing, change the timing of the card by sending
SWITCH command. Change the clock rate. Change the timing mode of controller.
3. Now call the host controller execute_tuning ops to perform the controller
sampling point tuning.
Also, let's pass the command opcode as the 2nd argument of the
execute_tuning() function. Which means host controller driver need not to
know the card type.
> +
> /*
> * If controller can't handle bus width
test,
> * compare ext_csd previously read in 1 bit
> mode
> * against ext_csd at new bus width
> */
> - if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
> + if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)
&&
> + !err)
> err = mmc_compare_ext_csds(card,
> bus_width);
> - else
> + else if (!err)
> err = mmc_bus_test(card, bus_width);
> + else
> + pr_warning("tuning execution
failed\n");
> if (!err)
> break;
> }
> @@ -1052,6 +1117,15 @@ static int mmc_init_card(struct mmc_host *host,
> u32 ocr,
> mmc_card_set_ddr_mode(card);
> mmc_set_timing(card->host, MMC_TIMING_UHS_DDR50);
> mmc_set_bus_width(card->host, bus_width);
> + } else if (hs_sdr) {
> + if (hs_sdr == EXT_CSD_CARD_TYPE_SDR_1_2V) {
> + err = mmc_set_signal_voltage(host,
> + MMC_SIGNAL_VOLTAGE_120, 0);
> + if (err)
> + goto err;
> + }
> + mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
> + mmc_set_bus_width(card->host, bus_width);
> }
> }
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index a69d269..28fb747 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -27,6 +27,7 @@
>
> #include <linux/mmc/mmc.h>
> #include <linux/mmc/host.h>
> +#include <linux/mmc/card.h>
>
> #include "sdhci.h"
>
> @@ -1016,7 +1017,8 @@ static void sdhci_send_command(struct sdhci_host
> *host, struct mmc_command *cmd)
> flags |= SDHCI_CMD_INDEX;
>
> /* CMD19 is special in that the Data Present Select should be set
> */
> - if (cmd->data || (cmd->opcode == MMC_SEND_TUNING_BLOCK))
> + if (cmd->data || (cmd->opcode == MMC_SEND_TUNING_BLOCK) ||
> + (cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200))
> flags |= SDHCI_CMD_DATA;
>
> sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags),
> SDHCI_COMMAND);
> @@ -1684,10 +1686,13 @@ static int sdhci_execute_tuning(struct mmc_host
> *mmc)
> * Host Controller needs tuning only in case of SDR104 mode
> * and for SDR50 mode when Use Tuning for SDR50 is set in
> * Capabilities register.
> + * If the Host Controller supports the HS200 mode then tuning
> + * function has to be executed.
> */
> if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR104) ||
> (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR50) &&
> - (host->flags & SDHCI_SDR50_NEEDS_TUNING)))
> + (host->flags & SDHCI_SDR50_NEEDS_TUNING)) ||
> + (host->flags & SDHCI_HS200_NEEDS_TUNING))
> ctrl |= SDHCI_CTRL_EXEC_TUNING;
> else {
> spin_unlock(&host->lock);
> @@ -1723,7 +1728,10 @@ static int sdhci_execute_tuning(struct mmc_host
> *mmc)
> if (!tuning_loop_counter && !timeout)
> break;
>
> - cmd.opcode = MMC_SEND_TUNING_BLOCK;
> + if (mmc->card->type == MMC_TYPE_MMC)
> + cmd.opcode = MMC_SEND_TUNING_BLOCK_HS200;
> + else
> + cmd.opcode = MMC_SEND_TUNING_BLOCK;
> cmd.arg = 0;
> cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
> cmd.retries = 0;
> @@ -1738,7 +1746,17 @@ static int sdhci_execute_tuning(struct mmc_host
> *mmc)
> * block to the Host Controller. So we set the block size
> * to 64 here.
> */
> - sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
> SDHCI_BLOCK_SIZE);
> + if (mmc->card->type == MMC_TYPE_MMC) {
> + if (mmc->ios.bus_width == MMC_BUS_WIDTH_8)
> + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128),
> + SDHCI_BLOCK_SIZE);
> + else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4)
> + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
> + SDHCI_BLOCK_SIZE);
> + } else {
> + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
> + SDHCI_BLOCK_SIZE);
> + }
>
> /*
> * The tuning block is sent by the card to the host
> controller.
> @@ -2121,12 +2139,14 @@ static void sdhci_show_adma_error(struct
> sdhci_host *host) { }
>
> static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
> {
> + u32 command;
> BUG_ON(intmask == 0);
>
> /* CMD19 generates _only_ Buffer Read Ready interrupt */
> if (intmask & SDHCI_INT_DATA_AVAIL) {
> - if (SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)) ==
> - MMC_SEND_TUNING_BLOCK) {
> + command = SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND));
> + if ((command == MMC_SEND_TUNING_BLOCK) ||
> + (command == MMC_SEND_TUNING_BLOCK_HS200)) {
> host->tuning_done = 1;
> wake_up(&host->buf_ready_int);
> return;
> @@ -2731,6 +2751,10 @@ int sdhci_add_host(struct sdhci_host *host)
> if (caps[1] & SDHCI_USE_SDR50_TUNING)
> host->flags |= SDHCI_SDR50_NEEDS_TUNING;
>
> + /* Does the host needs tuning for HS200? */
> + if (mmc->caps2 & MMC_CAP2_HS200)
> + host->flags |= SDHCI_HS200_NEEDS_TUNING;
> +
> /* Driver Type(s) (A, C, D) supported by the host */
> if (caps[1] & SDHCI_DRIVER_TYPE_A)
> mmc->caps |= MMC_CAP_DRIVER_TYPE_A;
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index 6e04e10..90af438 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -206,6 +206,7 @@ struct mmc_card {
> #define MMC_STATE_HIGHSPEED_DDR (1<<4) /* card is in high
> speed mode */
> #define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra
> high speed mode */
> #define MMC_CARD_SDXC (1<<6) /* card is SDXC */
> +#define MMC_STATE_HIGHSPEED_200 (1<<7) /* card is in HS200
> mode */
> unsigned int quirks; /* card quirks */
> #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0
> writes outside of the VS CCCR range */
> #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func-
> >cur_blksize */
> @@ -361,6 +362,7 @@ static inline void __maybe_unused
> remove_quirk(struct mmc_card *card, int data)
> #define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT)
> #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
> #define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED)
> +#define mmc_card_hs200(c) ((c)->state & MMC_STATE_HIGHSPEED_200)
> #define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR)
> #define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR)
> #define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED)
> @@ -369,6 +371,7 @@ static inline void __maybe_unused
> remove_quirk(struct mmc_card *card, int data)
> #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
> #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
> #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
> +#define mmc_card_set_hs200(c) ((c)->state |=
> MMC_STATE_HIGHSPEED_200)
> #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
> #define mmc_card_set_ddr_mode(c) ((c)->state |=
> MMC_STATE_HIGHSPEED_DDR)
> #define mmc_sd_card_set_uhs(c) ((c)->state |=
> MMC_STATE_ULTRAHIGHSPEED)
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index a3ac9c4..20551f5 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -60,6 +60,8 @@ struct mmc_ios {
> #define MMC_SDR_MODE 0
> #define MMC_1_2V_DDR_MODE 1
> #define MMC_1_8V_DDR_MODE 2
> +#define MMC_1_2V_SDR_MODE 3
> +#define MMC_1_8V_SDR_MODE 4
>
> unsigned char signal_voltage; /* signalling voltage
> (1.8V or 3.3V) */
>
> @@ -242,6 +244,10 @@ struct mmc_host {
> #define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */
> #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff
> supported */
> #define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads
> don't work */
> +#define MMC_CAP2_HS200 (1 << 4) /* Host supports
HS200 mode
> */
Why is this cap required? You have already defined this 2 caps
MMC_CAP2_HS200_1_8V_SDR & MMC_CAP2_HS200_1_2V_SDR which should be enough.
> +#define MMC_CAP2_HS200_1_8V_SDR (1 << 5) /* can support */
> +#define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */
> +#define MMC_CAP2_HIGHSPEED_200 (1 << 7) /* Can do MMC HS200
Why is this is this cap required?
> timing */
>
> mmc_pm_flag_t pm_caps; /* supported pm features */
> unsigned int power_notify_type;
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> index 0e71356..af4fa72 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -51,6 +51,7 @@
> #define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1
> */
> #define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1
> */
> #define MMC_SEND_TUNING_BLOCK 19 /* adtc R1
> */
> +#define MMC_SEND_TUNING_BLOCK_HS200 21 /* adtc R1 */
>
> /* class 3 */
> #define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1
> */
> @@ -333,13 +334,18 @@ struct _mmc_csd {
>
> #define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
> #define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
> -#define EXT_CSD_CARD_TYPE_MASK 0xF /* Mask out reserved bits */
> +#define EXT_CSD_CARD_TYPE_MASK 0x3F /* Mask out reserved bits */
> #define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz
> */
> /* DDR mode @1.8V or 3V I/O */
> #define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz
> */
> /* DDR mode @1.2V I/O */
> #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
> | EXT_CSD_CARD_TYPE_DDR_1_2V)
> +#define EXT_CSD_CARD_TYPE_SDR_1_8V (1<<4) /* Card can run at
> 200MHz */
> +#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at
> 200MHz */
> + /* SDR mode @1.2V I/O */
> +#define EXT_CSD_CARD_TYPE_SDR_200 (EXT_CSD_CARD_TYPE_SDR_1_8V \
> + | EXT_CSD_CARD_TYPE_SDR_1_2V)
>
> #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
> #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
> diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
> index e4b6935..d9a2222 100644
> --- a/include/linux/mmc/sdhci.h
> +++ b/include/linux/mmc/sdhci.h
> @@ -121,6 +121,7 @@ struct sdhci_host {
> #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */
> #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */
> #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
> +#define SDHCI_HS200_NEEDS_TUNING (1<<10) /* HS200 needs tuning */
>
> unsigned int version; /* SDHCI spec. version */
>
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
