From: Philip Rakity <prak...@marvell.com>
A UHS sdio card that fails initialization at 1.8v signaling
is not in UHS mode. We cannot use the speed in the the cis
to reflect the bus speed as this is the maxiumum value and
will not reflect the fact that the host is operating at a
lower (non uhs) bus speed.
Signed-off-by: Philip Rakity <prak...@marvell.com>
Signed-off-by: Bing Zhao <bz...@marvell.com>
Reviewed-by: Aaron Lu <aaron...@amd.com>
---
drivers/mmc/core/sdio.c | 7 ++++---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index b77f770..8b626ad 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -97,10 +97,11 @@ fail:
return ret;
}
-static int sdio_read_cccr(struct mmc_card *card)
+static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
{
int ret;
int cccr_vsn;
+ int uhs = ocr & R4_18V_PRESENT;
unsigned char data;
unsigned char speed;
@@ -148,7 +149,7 @@ static int sdio_read_cccr(struct mmc_card *card)
card->scr.sda_spec3 = 0;
card->sw_caps.sd3_bus_mode = 0;
card->sw_caps.sd3_drv_type = 0;
- if (cccr_vsn >= SDIO_CCCR_REV_3_00) {
+ if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) {
card->scr.sda_spec3 = 1;
ret = mmc_io_rw_direct(card, 0, 0,
SDIO_CCCR_UHS, 0, &data);
@@ -710,7 +711,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32
ocr,
/*
* Read the common registers.
*/
- err = sdio_read_cccr(card);
+ err = sdio_read_cccr(card, ocr);
if (err)
goto remove;
--
1.7.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
