On Fri, Apr 13, 2012 at 8:09 PM, Namjae Jeon <linkinj...@gmail.com> wrote:
> Hi. Venkatraman.
>
> You fixed 10 times. why is it 10 times ?
There's no right number - I haven't seen it fail much in my tests but
should allow a few retries.
> and checking err from mmc_send_status is not needed ? is it also
> infinite case ?
Check again - the loop will break if the send_status returns an error
(even once), or if the card comes out of PRG state.
>
> Thanks.
>
> 2012/4/13 Venkatraman S <svenk...@ti.com>:
>> Try to send HPI only a fixed number of times till it is
>> successful. One successful transfer is enough - but wait
>> till the card comes out of transfer state.
>> Return an error if the card was not in programming state to
>> begin with - so that the caller knows that HPI was not sent.
>>
>> Reported-by: Alex Lemberg <alex.lemb...@sandisk.com>
>> Signed-off-by: Venkatraman S <svenk...@ti.com>
>> ---
>> drivers/mmc/core/core.c | 34 ++++++++++++++++++----------------
>> 1 file changed, 18 insertions(+), 16 deletions(-)
>>
>> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
>> index e541efb..ceabef5 100644
>> --- a/drivers/mmc/core/core.c
>> +++ b/drivers/mmc/core/core.c
>> @@ -401,7 +401,7 @@ EXPORT_SYMBOL(mmc_wait_for_req);
>> */
>> int mmc_interrupt_hpi(struct mmc_card *card)
>> {
>> - int err;
>> + int err, i;
>> u32 status;
>>
>> BUG_ON(!card);
>> @@ -421,27 +421,29 @@ int mmc_interrupt_hpi(struct mmc_card *card)
>> /*
>> * If the card status is in PRG-state, we can send the HPI command.
>> */
>> + err = -EINVAL;
>> if (R1_CURRENT_STATE(status) == R1_STATE_PRG) {
>> - do {
>> - /*
>> - * We don't know when the HPI command will finish
>> - * processing, so we need to resend HPI until out
>> - * of prg-state, and keep checking the card status
>> - * with SEND_STATUS. If a timeout error occurs when
>> - * sending the HPI command, we are already out of
>> - * prg-state.
>> - */
>> + /* To prevent an infinite lockout, try to send HPI
>> + * a fixed number of times and bailout if it can't
>> + * succeed.
>> + */
>> + for (i = 0; i < 10 && err != 0 ; i++)
>> err = mmc_send_hpi_cmd(card, &status);
>> - if (err)
>> + /* Once HPI was sent successfully, the card is
>> + * supposed to be back to transfer state.
>> + */
>> + do {
>> + if (err) {
>> pr_debug("%s: abort HPI (%d error)\n",
>> mmc_hostname(card->host), err);
>> -
>> - err = mmc_send_status(card, &status);
>> - if (err)
>> break;
>> + }
>> + err = mmc_send_status(card, &status);
>> } while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
>> - } else
>> - pr_debug("%s: Left prg-state\n", mmc_hostname(card->host));
>> + } else {
>> + pr_debug("%s: Can't send HPI. State=%d\n",
>> + mmc_hostname(card->host), R1_CURRENT_STATE(status));
>> + }
>>
>> out:
>> mmc_release_host(card->host);
>> --
>> 1.7.10.rc2
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majord...@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
