Hi Giuseppe,
On Thu, Apr 19 2012, Giuseppe CAVALLARO wrote:
> This adds a new option to enable the boot from eMMC
> by writing to the 179 ext_csd register.
>
> The example below shows as to enable the mmcblk0boot0
> partition and also set/reset the ACK bit).
>
> $ ./mmc booten 1 1 /dev/mmcblk0boot0
> $ ./mmc extcsd read /dev/mmcblk0boot0 | grep PARTITION_CON
> Boot configuration bytes [PARTITION_CONFIG: 0x49]
>
> Reported-by: Youssef TRIKI <youssef.tr...@st.com>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavall...@st.com>
Looks good, thanks -- do you mind if I make the following changes for
readability (and are they correct)? I can update the commit message too:
diff --git a/mmc.c b/mmc.c
index c295885..6927b70 100644
--- a/mmc.c
+++ b/mmc.c
@@ -66,8 +66,8 @@ static struct Command commands[] = {
NULL
},
{ do_write_boot_en, -3,
- "booten", "<boot_partition> " "<ack> " "<device>\n"
- "Enable the boot partition for the <device>.",
+ "bootpart enable", "<boot_partition> " "<send_ack> " "<device>\n"
+ "Enable the boot partition for the <device>.\nTo receive
acknowledgment of boot from the card set <send_ack>\nto 1, else set it to 0.",
NULL
},
{ 0, 0, 0, 0 }
diff --git a/mmc_cmds.c b/mmc_cmds.c
index f588b17..2ab4185 100644
--- a/mmc_cmds.c
+++ b/mmc_cmds.c
@@ -174,13 +174,18 @@ int do_write_boot_en(int nargs, char **argv)
__u8 value = 0;
int fd, ret;
char *device;
- int boot_area, ack;
+ int boot_area, send_ack;
- CHECK(nargs != 4, "Usage: mmc booten <partition_number> "
- "<ack> </path/to/mmcblkX>\n", exit(1));
+ CHECK(nargs != 4, "Usage: mmc bootpart enable <partition_number> "
+ "<send_ack> </path/to/mmcblkX>\n", exit(1));
+ /*
+ * If <send_ack> is 1, the device will send acknowledgment
+ * pattern "010" to the host when boot operation begins.
+ * If <send_ack> is 0, it won't.
+ */
boot_area = strtol(argv[1], NULL, 10);
- ack = strtol(argv[2], NULL, 10);
+ send_ack = strtol(argv[2], NULL, 10);
device = argv[3];
fd = open(device, O_RDWR);
@@ -214,7 +219,7 @@ int do_write_boot_en(int nargs, char **argv)
fprintf(stderr, "Cannot enable the boot area\n");
exit(1);
}
- if (ack)
+ if (send_ack)
value |= EXT_CSD_PART_CONFIG_ACC_ACK;
else
value &= ~EXT_CSD_PART_CONFIG_ACC_ACK;
--
Chris Ball <c...@laptop.org> <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
