From: Saugata Das <saugata....@linaro.org>

In this patch, we add utility to disable emulation mode in the eMMC-4.5.
This is done to increase the data sector size to 4KB.

Signed-off-by: Saugata Das <saugata....@linaro.org>

changes in v2:
        Review rework based on comments from Subhash
---
 mmc.c      |    6 ++++++
 mmc.h      |   10 ++++++++++
 mmc_cmds.c |   51 +++++++++++++++++++++++++++++++++++++++++++++++++++
 mmc_cmds.h |    1 +
 4 files changed, 68 insertions(+), 0 deletions(-)

diff --git a/mmc.c b/mmc.c
index c27fc24..ebc7ab2 100644
--- a/mmc.c
+++ b/mmc.c
@@ -65,6 +65,12 @@ static struct Command commands[] = {
                "Set the eMMC writeprotect status of <device>.",
          NULL
        },
+       { do_disable_512B_emulation, -1,
+         "disable 512B emulation", "<device>\n"
+               "Set the eMMC data sector size to 4KB by disabling emulation 
<device>.",
+         NULL
+       },
+
        { 0, 0, 0, 0 }
 };
 
diff --git a/mmc.h b/mmc.h
index 3af36f1..34c31d3 100644
--- a/mmc.h
+++ b/mmc.h
@@ -35,6 +35,16 @@
 #define EXT_CSD_PART_SWITCH_TIME       199
 #define EXT_CSD_BOOT_CFG               179
 #define EXT_CSD_BOOT_WP                        173
+#define EXT_CSD_WR_REL_PARAM   166
+#define EXT_CSD_NATIVE_SECTOR_SIZE     63 /* R */
+#define EXT_CSD_USE_NATIVE_SECTOR      62 /* R/W */
+#define EXT_CSD_DATA_SECTOR_SIZE       61 /* R */
+
+/*
+ * WR_REL_PARAM field definitions
+ */
+#define HS_CTRL_REL    (1<<0)
+#define EN_REL_WR      (1<<2)
 
 /*
  * EXT_CSD field definitions
diff --git a/mmc_cmds.c b/mmc_cmds.c
index 4562cef..f0e64c9 100644
--- a/mmc_cmds.c
+++ b/mmc_cmds.c
@@ -168,6 +168,57 @@ int do_writeprotect_set(int nargs, char **argv)
        return ret;
 }
 
+
+int do_disable_512B_emulation(int nargs, char **argv)
+{
+       __u8 ext_csd[512], native_sector_size, data_sector_size, wr_rel_param;
+       int fd, ret;
+       char *device;
+
+       CHECK(nargs != 2, "Usage: mmc </path/to/mmcblkX>\n", exit(1));
+
+       device = argv[1];
+
+       fd = open(device, O_RDWR);
+       if (fd < 0) {
+               perror("open");
+               exit(1);
+       }
+
+       ret = read_extcsd(fd, ext_csd);
+       if (ret) {
+               fprintf(stderr, "Could not read EXT_CSD from %s\n", device);
+               exit(1);
+       }
+
+       wr_rel_param = ext_csd[EXT_CSD_WR_REL_PARAM];
+       native_sector_size = ext_csd[EXT_CSD_NATIVE_SECTOR_SIZE];
+       data_sector_size = ext_csd[EXT_CSD_DATA_SECTOR_SIZE];
+
+       if (native_sector_size &&
+               !data_sector_size &&
+               (wr_rel_param & EN_REL_WR)) {
+               ret = write_extcsd_value(fd, EXT_CSD_USE_NATIVE_SECTOR, 1);
+
+               if (ret) {
+                       fprintf(stderr, "Could not write 0x%02x to "
+                                       "EXT_CSD[%d] in %s\n",
+                                       1, EXT_CSD_BOOT_WP, device);
+                       exit(1);
+               }
+               printf("MMC disable 512B emulation successful\n"
+                               "Now reset the device to switch to 4KB "
+                               "native sector mode\n");
+       } else if (native_sector_size && data_sector_size) {
+               printf("MMC already disabled 512B emulation mode\n");
+       } else {
+               printf("MMC does not support disabling 512B emulation mode\n");
+       }
+
+       return ret;
+}
+
+
 int do_read_extcsd(int nargs, char **argv)
 {
        __u8 ext_csd[512], ext_csd_rev, reg;
diff --git a/mmc_cmds.h b/mmc_cmds.h
index 66e9acb..56f46d7 100644
--- a/mmc_cmds.h
+++ b/mmc_cmds.h
@@ -19,3 +19,4 @@ int do_read_extcsd(int nargs, char **argv);
 int do_write_extcsd(int nargs, char **argv);
 int do_writeprotect_get(int nargs, char **argv);
 int do_writeprotect_set(int nargs, char **argv);
+int do_disable_512B_emulation(int nargs, char **argv);
-- 
1.7.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to