Currently the TMIO MMC driver derives the OCR mask from the platform data
and uses a platform callback to turn card power on and off. This patch adds
regulator support to the driver.
Signed-off-by: Guennadi Liakhovetski <g.liakhovet...@gmx.de>
Cc: Liam Girdwood <l...@ti.com>
Cc: Mark Brown <broo...@opensource.wolfsonmicro.com>
---
v4: updated to the new mmc_regulator_get_supply() implementation
drivers/mmc/host/tmio_mmc_pio.c | 37 +++++++++++++++++++++++++++++--------
1 files changed, 29 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 869ee69..410b8cf 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -767,6 +767,18 @@ static int tmio_mmc_clk_update(struct mmc_host *mmc)
return ret;
}
+static void tmio_mmc_set_power(struct tmio_mmc_host *host, struct mmc_ios *ios)
+{
+ struct mmc_host *mmc = host->mmc;
+
+ if (host->set_pwr)
+ host->set_pwr(host->pdev, ios->power_mode != MMC_POWER_OFF);
+ if (!IS_ERR(mmc->supply.vmmc))
+ /* Errors ignored... */
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
+ ios->power_mode ? ios->vdd : 0);
+}
+
/* Set MMC clock / power.
* Note: This controller uses a simple divider scheme therefore it cannot
* run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
@@ -819,13 +831,12 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct
mmc_ios *ios)
}
tmio_mmc_set_clock(host, ios->clock);
/* power up SD bus */
- if (host->set_pwr)
- host->set_pwr(host->pdev, 1);
+ tmio_mmc_set_power(host, ios);
/* start bus clock */
tmio_mmc_clk_start(host);
} else if (ios->power_mode != MMC_POWER_UP) {
- if (host->set_pwr && ios->power_mode == MMC_POWER_OFF)
- host->set_pwr(host->pdev, 0);
+ if (ios->power_mode == MMC_POWER_OFF)
+ tmio_mmc_set_power(host, ios);
if (host->power) {
struct tmio_mmc_data *pdata = host->pdata;
tmio_mmc_clk_stop(host);
@@ -887,6 +898,19 @@ static const struct mmc_host_ops tmio_mmc_ops = {
.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
};
+static void tmio_mmc_init_ocr(struct tmio_mmc_host *host)
+{
+ struct tmio_mmc_data *pdata = host->pdata;
+ struct mmc_host *mmc = host->mmc;
+
+ mmc_regulator_get_supply(mmc);
+
+ if (!mmc->ocr_avail)
+ mmc->ocr_avail = pdata->ocr_mask ? : MMC_VDD_32_33 |
MMC_VDD_33_34;
+ else if (pdata->ocr_mask)
+ dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
+}
+
int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
struct platform_device *pdev,
struct tmio_mmc_data *pdata)
@@ -932,10 +956,7 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host
**host,
mmc->max_segs;
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_seg_size = mmc->max_req_size;
- if (pdata->ocr_mask)
- mmc->ocr_avail = pdata->ocr_mask;
- else
- mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ tmio_mmc_init_ocr(_host);
_host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD ||
mmc->caps & MMC_CAP_NEEDS_POLL ||
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
