On 13 July 2012 09:28, Jaehoon Chung <jh80.ch...@samsung.com> wrote:
> As DesignWare spec, when inform ciu, waiting for clearing start_bit
> or HLE is set. In case of HLE, repeat the command.
>
> Before the patch, repeat the below message.
> mmc_host mmc0: Timeout sending command (cmd 0x202000 arg 0x0 status
> 0x80202000)
> If this message is produced, repeat the send command during 10 times.
I dont understand what the above message. its not clear. can you
please explain it
>
> Signed-off-by: Jaehoon Chung <jh80.ch...@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
> ---
> drivers/mmc/host/dw_mmc.c | 39 +++++++++++++++++++++++++++++++--------
> 1 files changed, 31 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 72dc3cd..bec1a67 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -603,7 +603,7 @@ static void dw_mci_submit_data(struct dw_mci *host,
> struct mmc_data *data)
> }
> }
>
> -static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
> +static int mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
> {
> struct dw_mci *host = slot->host;
> unsigned long timeout = jiffies + msecs_to_jiffies(500);
> @@ -616,11 +616,37 @@ static void mci_send_cmd(struct dw_mci_slot *slot, u32
> cmd, u32 arg)
> while (time_before(jiffies, timeout)) {
> cmd_status = mci_readl(host, CMD);
> if (!(cmd_status & SDMMC_CMD_START))
> - return;
> + return 0;
> }
> dev_err(&slot->mmc->class_dev,
> "Timeout sending command (cmd %#x arg %#x status %#x)\n",
> cmd, arg, cmd_status);
> +
> + return -ETIMEDOUT;
> +}
> +
> +static void dw_mci_inform_ciu(struct dw_mci_slot *slot)
> +{
> + struct dw_mci *host = slot->host;
> + unsigned long retry = 10;
> + int ret;
> + u32 ctrl;
> +
> + while (1) {
> + ret = mci_send_cmd(slot,
> + SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
> + if (!ret)
> + break;
the returned error type is timeout. Is it not necessary to read and
check the HLE bit here before resending.
> + ctrl = mci_readl(host, CTRL);
> + ctrl |= SDMMC_CTRL_RESET;
> + mci_writel(host, CTRL, ctrl);
> +
> + if (retry-- == 0) {
> + dev_err(&slot->mmc->class_dev,"Timeout inform CIU\n");
> + break;
> + } else
> + dev_info(&slot->mmc->class_dev,"Retry send
> command\n");
> + }
> }
>
> static void dw_mci_setup_bus(struct dw_mci_slot *slot)
> @@ -649,23 +675,20 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
> mci_writel(host, CLKSRC, 0);
>
> /* inform CIU */
> - mci_send_cmd(slot,
> - SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
> + dw_mci_inform_ciu(slot);
>
> /* set clock to desired speed */
> mci_writel(host, CLKDIV, div);
>
> /* inform CIU */
> - mci_send_cmd(slot,
> - SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
> + dw_mci_inform_ciu(slot);
>
> /* enable clock */
> mci_writel(host, CLKENA, ((SDMMC_CLKEN_ENABLE |
> SDMMC_CLKEN_LOW_PWR) << slot->id));
>
> /* inform CIU */
> - mci_send_cmd(slot,
> - SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
> + dw_mci_inform_ciu(slot);
>
> host->current_speed = slot->clock;
> }
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html