Tested on OLPC XO-4/MMP3, where the card detection pin for one of the
controllers is a sideband GPIO. The third cell in the power-gpios
property controls whether the GPIO is active high/active low.
Signed-off-by: Chris Ball <c...@laptop.org>
---
drivers/mmc/host/sdhci-pxav3.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 0bdb326..5427d52 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -211,6 +211,10 @@ static struct sdhci_pxa_platdata
*pxav3_get_mmc_pdata(struct device *dev)
if (gpio_flags != OF_GPIO_ACTIVE_LOW)
pdata->host_caps2 |= MMC_CAP2_PWR_ACTIVE_HIGH;
+ pdata->ext_cd_gpio = of_get_named_gpio_flags(np, "cd-gpios", 0,
&gpio_flags);
+ if (gpio_flags != OF_GPIO_ACTIVE_LOW)
+ pdata->host_caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
+
return pdata;
}
#else
@@ -292,6 +296,15 @@ static int __devinit sdhci_pxav3_probe(struct
platform_device *pdev)
goto err_power_req;
}
}
+
+ if (gpio_is_valid(pdata->ext_cd_gpio)) {
+ ret = mmc_gpio_request_cd(host->mmc,
pdata->ext_cd_gpio);
+ if (ret) {
+ dev_err(mmc_dev(host->mmc),
+ "failed to allocate card detect
gpio\n");
+ goto err_cd_req;
+ }
+ }
}
host->ops = &pxav3_sdhci_ops;
@@ -309,6 +322,8 @@ static int __devinit sdhci_pxav3_probe(struct
platform_device *pdev)
err_add_host:
clk_disable_unprepare(clk);
clk_put(clk);
+ mmc_gpio_free_cd(host->mmc);
+err_cd_req:
mmc_gpio_free_pwr(host->mmc);
err_power_req:
err_clk_get:
@@ -331,6 +346,8 @@ static int __devexit sdhci_pxav3_remove(struct
platform_device *pdev)
if (gpio_is_valid(pdata->power_gpio))
mmc_gpio_free_pwr(host->mmc);
+ if (gpio_is_valid(pdata->ext_cd_gpio))
+ mmc_gpio_free_cd(host->mmc);
sdhci_pltfm_free(pdev);
kfree(pxa);
--
Chris Ball <c...@laptop.org> <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
