From: Kevin Liu <kl...@marvell.com>

Because sdhci can do the same thing so no need to implement this.

Signed-off-by: Kevin Liu <kl...@marvell.com>
---
 drivers/mmc/host/sdhci-pxav3.c |   39 ---------------------------------------
 1 files changed, 0 insertions(+), 39 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 2746bb5..e444eff 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -125,44 +125,6 @@ static void pxav3_gen_init_74_clocks(struct sdhci_host 
*host, u8 power_mode)
        pxa->power_mode = power_mode;
 }
 
-static int pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
-{
-       u16 ctrl_2;
-
-       /*
-        * Set V18_EN -- UHS modes do not work without this.
-        * does not change signaling voltage
-        */
-       ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-
-       /* Select Bus Speed Mode for host */
-       ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
-       switch (uhs) {
-       case MMC_TIMING_UHS_SDR12:
-               ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
-               break;
-       case MMC_TIMING_UHS_SDR25:
-               ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
-               break;
-       case MMC_TIMING_UHS_SDR50:
-               ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
-               break;
-       case MMC_TIMING_UHS_SDR104:
-               ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
-               break;
-       case MMC_TIMING_UHS_DDR50:
-               ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
-               break;
-       }
-
-       sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
-       dev_dbg(mmc_dev(host->mmc),
-               "%s uhs = %d, ctrl_2 = %04X\n",
-               __func__, uhs, ctrl_2);
-
-       return 0;
-}
-
 static void pxav3_signal_voltage_switch(struct sdhci_host *host, u8 vol)
 {
        struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
@@ -189,7 +151,6 @@ static void pxav3_signal_voltage_switch(struct sdhci_host 
*host, u8 vol)
 
 static struct sdhci_ops pxav3_sdhci_ops = {
        .platform_reset_exit = pxav3_set_private_registers,
-       .set_uhs_signaling = pxav3_set_uhs_signaling,
        .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
        .signal_voltage_switch = pxav3_signal_voltage_switch,
 };
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to