Hi, Anton. Could you have any comment about it? If not, I will resend this patch with v2.
Best Regards Jerry Huang > -----Original Message----- > From: linux-mmc-ow...@vger.kernel.org [mailto:linux-mmc- > ow...@vger.kernel.org] On Behalf Of Huang Changming-R66093 > Sent: Tuesday, October 23, 2012 4:40 PM > To: Anton Vorontsov > Cc: linux-mmc@vger.kernel.org; Chris Ball; Kumar Gala; linuxppc- > d...@lists.ozlabs.org > Subject: RE: [PATCH] powerpc/esdhc: enable the card insert/remove > interrupt > > Hi, Anton > For FSL SOCs, the interrupt mode is support for card detect. > For some reasons, some board can't support this feature, such as > mpc837xmds board, but mpc837xrdb board support it. > > I see your links, it is about the DMA (the first version of p2020 don't > support DMA, need to enable the PIO mode, but the later version has fixed > this issue). > > Best Regards > Jerry Huang > > > > -----Original Message----- > > From: linux-mmc-ow...@vger.kernel.org [mailto:linux-mmc- > > ow...@vger.kernel.org] On Behalf Of Anton Vorontsov > > Sent: Tuesday, October 23, 2012 4:27 PM > > To: Huang Changming-R66093 > > Cc: linux-mmc@vger.kernel.org; Huang Changming-R66093; Chris Ball; > > Kumar Gala; linuxppc-...@lists.ozlabs.org > > Subject: Re: [PATCH] powerpc/esdhc: enable the card insert/remove > > interrupt > > > > On Tue, Oct 23, 2012 at 03:01:17PM +0800, r66...@freescale.com wrote: > > > From: Jerry Huang <chang-ming.hu...@freescale.com> > > > > > > The current eSDHC driver use the poll mode to detect if the SD/MMC > > > card is inserted or removed, which will generate many interrupts and > > > impact the performance. > > > Therefore, change the default card detect to interrupt mode, if the > > > board can't support this mode, we still use the poll mode. > > > > > > Signed-off-by: Jerry Huang <chang-ming.hu...@freescale.com> > > > CC: Anton Vorontsov <cbouatmai...@gmail.com> > > > CC: Chris Ball <c...@laptop.org> > > > --- > > > > IIRC, the card detection is broken SOC-revision-wise, not board-wise. > > So the change seems wrong. > > > > Also, take a look at this: > > > > http://lkml.org/lkml/2010/7/14/127 > > > > I started the work but never finished, unfortunately it caused some > > regressions for non-FSL hardware... > > > > > drivers/mmc/host/sdhci-of-esdhc.c | 7 ++++++- > > > 1 file changed, 6 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/mmc/host/sdhci-of-esdhc.c > > > b/drivers/mmc/host/sdhci-of-esdhc.c > > > index ffc1226..5dc362f 100644 > > > --- a/drivers/mmc/host/sdhci-of-esdhc.c > > > +++ b/drivers/mmc/host/sdhci-of-esdhc.c > > > @@ -196,6 +196,11 @@ static void esdhc_of_detect_limitation(struct > > platform_device *pdev, > > > if (vvn == VENDOR_V_22) > > > pdata->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23; > > > > > > + /* P4080DS and MPC837XMDS board don't support interrupt mode */ > > > + if (of_machine_is_compatible("fsl,mpc837xmds") || > > > + of_machine_is_compatible("fsl,P4080DS")) > > > + pdata->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; > > > + > > > iounmap(ioaddr); > > > end: > > > return; > > > @@ -223,7 +228,7 @@ static struct sdhci_pltfm_data sdhci_esdhc_pdata > > > = > > { > > > * card detection could be handled via GPIO > > > * eSDHC cannot support End Attribute in NOP ADMA descriptor > > > */ > > > - .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION > > > + .quirks = ESDHC_DEFAULT_QUIRKS > > > | SDHCI_QUIRK_NO_CARD_NO_RESET > > > | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, > > > .ops = &sdhci_esdhc_ops, > > > -- > > > 1.7.9.5 > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-mmc" > > in the body of a message to majord...@vger.kernel.org More majordomo > > info at http://vger.kernel.org/majordomo-info.html > > N r y b X ǧv ^ ){.n + { g" ^n r z h & G h > ( 階 ݢj" m z ޖ f h ~ m N�����r��y����b�X��ǧv�^�){.n�+����{��g"��^n�r���z���h�����&�� �G���h�(�階�ݢj"���m������z�ޖ���f���h���~�m�
