This fetches the pinctrl resource for the MMCI driver, and if
a "default" state is found, it is activated.
Acked-by: Ulf Hansson <ulf.hans...@linaro.org>
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
---
ChangeLog v1->v2:
- Change dev_err() to dev_warn() when grabbing the default pins
since being unable to obtain the default state is not in any
way fatal.
---
drivers/mmc/host/mmci.c | 18 ++++++++++++++++++
drivers/mmc/host/mmci.h | 4 ++++
2 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index edc3e9b..9a36226 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -33,6 +33,7 @@
#include <linux/amba/mmci.h>
#include <linux/pm_runtime.h>
#include <linux/types.h>
+#include <linux/pinctrl/consumer.h>
#include <asm/div64.h>
#include <asm/io.h>
@@ -1360,6 +1361,23 @@ static int __devinit mmci_probe(struct amba_device *dev,
mmc->f_max = min(host->mclk, fmax);
dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
+ host->pinctrl = devm_pinctrl_get(&dev->dev);
+ if (IS_ERR(host->pinctrl)) {
+ ret = PTR_ERR(host->pinctrl);
+ goto clk_disable;
+ }
+
+ host->pins_default = pinctrl_lookup_state(host->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+
+ /* enable pins to be muxed in and configured */
+ if (!IS_ERR(host->pins_default)) {
+ ret = pinctrl_select_state(host->pinctrl, host->pins_default);
+ if (ret)
+ dev_warn(&dev->dev, "could not set default pins\n");
+ } else
+ dev_warn(&dev->dev, "could not get default pinstate\n");
+
#ifdef CONFIG_REGULATOR
/* If we're using the regulator framework, try to fetch a regulator */
host->vcc = regulator_get(&dev->dev, "vmmc");
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index d437ccf..d34d8c0 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -195,6 +195,10 @@ struct mmci_host {
unsigned int size;
struct regulator *vcc;
+ /* pinctrl handles */
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_default;
+
#ifdef CONFIG_DMA_ENGINE
/* DMA stuff */
struct dma_chan *dma_current;
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
