2012/11/14 Philip Rakity <prak...@nvidia.com>: > > On Nov 14, 2012, at 8:57 AM, Kevin Liu <keyuan....@gmail.com> wrote: > >> 2012/11/14 Mark Brown <broo...@opensource.wolfsonmicro.com>: >>> On Wed, Nov 14, 2012 at 04:36:28PM +0800, Kevin Liu wrote: >>>> 2012/11/14 Mark Brown <broo...@opensource.wolfsonmicro.com>: >>> >>>>> Should this be regulator_set_voltage_tol()? Otherwise it'd be good to >>>>> explain where the numbers come from. >>> >>>> In SD physical layer spec 3.01 chapter 6.6.1, the threshold level for >>>> voltage range is defined as below: >>>> Vdd(min) = 2.7V while Vdd(max) = 3.6V. >>>> The card should work within the voltage range. >>> >>>> If you are afraid the voltage value is too aggressive, maybe we can >>>> use regulator_set_voltage_tol() to set a smaller range. >>>> But which range should be reasonable? >>> >>> The above makes total sense - thanks! I just wasn't aware that the >>> range was specified in this fashion in the spec. Might be worth a >>> comment in the code if you need to respin. >> >> Sure, I will update the patch. Thanks! >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >> the body of a message to majord...@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > re-read spec. Please apply Kevin;s patch. > > Reviewed-by: Philip Rakity <prak...@nvidia.com>
Philip, thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
