On 12/7/2012 8:21 PM, Ulf Hansson wrote:
On 7 December 2012 13:15, Subhash Jadavani <subha...@codeaurora.org> wrote:
On 12/7/2012 3:40 AM, Ulf Hansson wrote:
On 6 December 2012 16:25, Subhash Jadavani <subha...@codeaurora.org>
wrote:
On 12/6/2012 4:03 PM, Ulf Hansson wrote:
On 4 December 2012 12:36, Subhash Jadavani <subha...@codeaurora.org>
wrote:
If SDIO keep power flag (MMC_PM_KEEP_POWER) is not set, card would
be reinitialized during resume but as we are not resetting
(CMD52 reset) the SDIO card during this reinitialization, card may
fail to respond back to subsequent commands (CMD5 etc...).
This change resets the card before the reinitialization of card
during resume.
Signed-off-by: Subhash Jadavani <subha...@codeaurora.org>
---
drivers/mmc/core/sdio.c | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 2273ce6..34ad4c8 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -937,10 +937,12 @@ static int mmc_sdio_resume(struct mmc_host *host)
mmc_claim_host(host);
/* No need to reinitialize powered-resumed nonremovable cards
*/
- if (mmc_card_is_removable(host) || !mmc_card_keep_power(host))
+ if (mmc_card_is_removable(host) || !mmc_card_keep_power(host))
{
+ sdio_reset(host);
+ mmc_go_idle(host);
If the card has lost power, why is this needed? Could it be that the
host is not capable of cutting the power to card?
Yes, the regulator powering the card is always on in this case which
means
SDIO VDD is not powered off during the suspend.
So in principle the host should be able to notify the protocol layer
about that mmc_card_keep_power will always be set somehow.
That could be a more proper way of solving this maybe? What do you think?
Ok.
Basically this would be the suspend/resume sequence with Keep Power flag
cleared.
I mean the exact opposite. :-)
mmc_keep_power should be _set_ during suspend/resume sequence.
That will mean at suspend; sdio_disable_4bit_bus will be called and
mmc_power_off will not.
At resume, sdio_enable_4bit_bus will be called, without doing
mmc_power_up and mmc_sdio_init_card.
Do note that there is no API for the setting mmc_keep_power from a
host. It exist only in the SDIO API. (sdio_set_host_pm_flags).
So I guess we should invent this API for the host to use.
Thanks Ulf. I got your point. Will try out your suggestion and will
update (with patch & result) soon.
On the other hand,
Do you see it's worth to have this current patch as well? I guess it's
safe to do sdio_reset() before SDIO card init and we are already playing
safe even in mmc_rescan*() by calling sdio_reset() before card detection.
Regards,
Subhash
Suspend:
1. Execute Function driver suspend
2. mmc_power_off()
2.1 As this is regulator powering card SDIO VDD line is always on
regulator, it will stay on.
Resume:
1. mmc_power_up()
1.1 Regulator was anyway on so nothing change here.
2. mmc_sdio_init_card() - reinitialize the card
2.1 CMD5 gets the commands response timeout which means card doesn't
respond back.
My understanding is that behaviour seen in 2.1 (resume) is because during
suspend, function driver suspend might have done something with the SDIO
card (as keep power flag was disabled) and that's the reason during resume,
card fails to respond back to CMD5 (unless we send the CMD52 to reset the
card). It's an athros SDIO wifi card here.
So in principle the host should be able to notify the protocol layer
about that mmc_card_keep_power will always be set somehow.
Given the above issue, i am not sure how is this suggestion going to help in
this case?
Regards,
Subhash
It might be more safe to do this but I would like to understand more,
before you get my ack on this patch.
err = mmc_sdio_init_card(host, host->ocr, host->card,
mmc_card_keep_power(host));
- else if (mmc_card_keep_power(host) &&
mmc_card_wake_sdio_irq(host)) {
+ } else if (mmc_card_keep_power(host) &&
mmc_card_wake_sdio_irq(host)) {
/* We may have switched to 1-bit mode during suspend
*/
err = sdio_enable_4bit_bus(host->card);
if (err > 0) {
--
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
member
of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Kind regards
Ulf Hansson
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
