On 01/25/2013 12:30 PM, Balaji T K wrote:
> SET_BLOCK_COUNT CMD23 is needed for all access to RPMB partition.
> If block count is not set by CMD23, all subsequent read/write commands
> fail as per eMMC specification. So, If the host does not support CMD23,
> do not expose RPMB partition.
>
> Accessing RPMB partition can cause hang / huge delay
> for host which do not support CMD23.
Can this patch make it's way to 3.8? Without this patch my OMAP4 board's eMMC
is not accessible causing blkid (via udev) to time out and slowing down the
boot process.
Tested-by: Peter Ujfalusi <peter.ujfal...@ti.com>
>
> Signed-off-by: Balaji T K <balaj...@ti.com>
> Reported-by: Peter Ujfalusi <peter.ujfal...@ti.com>
> ---
> drivers/mmc/core/mmc.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index e6e3911..089e8ea 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -496,7 +496,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8
> *ext_csd)
> * RPMB regions are defined in multiples of 128K.
> */
> card->ext_csd.raw_rpmb_size_mult = ext_csd[EXT_CSD_RPMB_MULT];
> - if (ext_csd[EXT_CSD_RPMB_MULT]) {
> + if (ext_csd[EXT_CSD_RPMB_MULT] && mmc_host_cmd23(card->host)) {
> mmc_part_add(card, ext_csd[EXT_CSD_RPMB_MULT] << 17,
> EXT_CSD_PART_CONFIG_ACC_RPMB,
> "rpmb", 0, false,
>
--
Péter
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
