The mvsdio driver was already using some dev_*() functions to print
some messages, but still using pr_*() functions for some others. This
patch converts all messages to use dev_*() functions.
Many of the pr_*() function calls were printing the output of
mmc_hostname() to preprend the message with an identifier for the
device. Since the dev_*() functions do that automatically, this patch
also gets rid of those string prefixes.
Signed-off-by: Thomas Petazzoni <thomas.petazz...@free-electrons.com>
---
This is for 3.10.
---
drivers/mmc/host/mvsdio.c | 37 +++++++++++++++----------------------
1 file changed, 15 insertions(+), 22 deletions(-)
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 145cdaf..3cce2de 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -119,10 +119,8 @@ static int mvsd_setup_data(struct mvsd_host *host, struct
mmc_data *data)
host->pio_size = data->blocks * data->blksz;
host->pio_ptr = sg_virt(data->sg);
if (!nodma)
- pr_debug("%s: fallback to PIO for data "
- "at 0x%p size %d\n",
- mmc_hostname(host->mmc),
- host->pio_ptr, host->pio_size);
+ dev_dbg(host->dev, "fallback to PIO for data at 0x%p
size %d\n",
+ host->pio_ptr, host->pio_size);
return 1;
} else {
dma_addr_t phys_addr;
@@ -473,8 +471,8 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
if (mrq->data)
err_status = mvsd_finish_data(host, mrq->data,
err_status);
if (err_status) {
- pr_err("%s: unhandled error status %#04x\n",
- mmc_hostname(host->mmc), err_status);
+ dev_err(host->dev, "unhandled error status %#04x\n",
+ err_status);
cmd->error = -ENOMSG;
}
@@ -491,9 +489,8 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
if (irq_handled)
return IRQ_HANDLED;
- pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x "
- "pio=%d\n", mmc_hostname(host->mmc), intr_status,
- host->intr_en, host->pio_size);
+ dev_err(host->dev, "%s: unhandled interrupt status=0x%04x en=0x%04x
pio=%d\n",
+ intr_status, host->intr_en, host->pio_size);
return IRQ_NONE;
}
@@ -507,13 +504,11 @@ static void mvsd_timeout_timer(unsigned long data)
spin_lock_irqsave(&host->lock, flags);
mrq = host->mrq;
if (mrq) {
- pr_err("%s: Timeout waiting for hardware interrupt.\n",
- mmc_hostname(host->mmc));
- pr_err("%s: hw_state=0x%04x, intr_status=0x%04x "
- "intr_en=0x%04x\n", mmc_hostname(host->mmc),
- mvsd_read(MVSD_HW_STATE),
- mvsd_read(MVSD_NOR_INTR_STATUS),
- mvsd_read(MVSD_NOR_INTR_EN));
+ dev_err(host->dev, "Timeout waiting for hardware interrupt.\n");
+ dev_err(host->dev, "hw_state=0x%04x, intr_status=0x%04x
intr_en=0x%04x\n",
+ mvsd_read(MVSD_HW_STATE),
+ mvsd_read(MVSD_NOR_INTR_STATUS),
+ mvsd_read(MVSD_NOR_INTR_EN));
host->mrq = NULL;
@@ -778,7 +773,7 @@ static int __init mvsd_probe(struct platform_device *pdev)
ret = devm_request_irq(&pdev->dev, irq, mvsd_irq, 0, DRIVER_NAME, host);
if (ret) {
- pr_err("%s: cannot assign irq %d\n", DRIVER_NAME, irq);
+ dev_err(&pdev->dev, "cannot assign irq %d\n", irq);
goto out;
}
@@ -797,13 +792,11 @@ static int __init mvsd_probe(struct platform_device *pdev)
if (ret)
goto out;
- pr_notice("%s: %s driver initialized, ",
- mmc_hostname(mmc), DRIVER_NAME);
if (!(mmc->caps & MMC_CAP_NEEDS_POLL))
- printk("using GPIO %d for card detection\n",
- gpio_card_detect);
+ dev_notice(&pdev->dev, "using GPIO %d for card detection\n",
+ gpio_card_detect);
else
- printk("lacking card detect (fall back to polling)\n");
+ dev_notice(&pdev->dev, "lacking card detect (fall back to
polling)\n");
return 0;
out:
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
