Hi Chris

On Wed, 24 Apr 2013, Guennadi Liakhovetski wrote:

> This fixes two reported problems:
> 1. after a system resume the controller isn't functioning until a command
>    runs on a timeout and a controller reset is performed.
> 2. if a card is ejected during a running write operation, its re-insertion
>    isn't detected.
> 
> Reported-by: Nguyen Viet Dung <nv-d...@jinso.co.jp>
> Reported-by: Nguyen Hong Ky <nh...@jinso.co.jp>
> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+rene...@gmail.com>

Please, add the following tags, when applying:

Tested-by: Nguyen Viet Dung <nv-d...@jinso.co.jp>
Tested-by: Nguyen Hong Ky <nh...@jinso.co.jp>

Thanks
Guennadi

> ---
> 
> v2: this patch supersedes the earlier "mmc: tmio: postpone controller 
> reset during resume" in that it extends the number of cases, in which the 
> reset is applied. It turned out, it is needed not only after a resume, but 
> also for recovery after an interrupted write. It also now applies on top 
> of "[PATCH v2] MMC: tmio: fix unbalanced power-on calls with clock-gating 
> enabled" http://article.gmane.org/gmane.linux.kernel.mmc/20233. Reporters 
> are cordially invited to add their "Tested-by" tags ;-)
> 
> Chris, both these patches are fixes. Not sure whether it's still a good 
> idea to push them for 3.9, maybe better get them into 3.10 and then to 
> stable?
> 
>  drivers/mmc/host/tmio_mmc_pio.c |    3 ++-
>  1 files changed, 2 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
> index 1d5ef64..fcb9503 100644
> --- a/drivers/mmc/host/tmio_mmc_pio.c
> +++ b/drivers/mmc/host/tmio_mmc_pio.c
> @@ -863,6 +863,8 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct 
> mmc_ios *ios)
>                       tmio_mmc_clk_update(mmc);
>                       pm_runtime_get_sync(dev);
>               }
> +             if (host->power == TMIO_MMC_OFF_STOP)
> +                     tmio_mmc_reset(host);
>               tmio_mmc_set_clock(host, ios->clock);
>               if (host->power == TMIO_MMC_OFF_STOP)
>                       /* power up SD card and the bus */
> @@ -1161,7 +1163,6 @@ int tmio_mmc_host_resume(struct device *dev)
>       struct mmc_host *mmc = dev_get_drvdata(dev);
>       struct tmio_mmc_host *host = mmc_priv(mmc);
>  
> -     tmio_mmc_reset(host);
>       tmio_mmc_enable_dma(host, true);
>  
>       /* The MMC core will perform the complete set up */
> -- 
> 1.7.2.5
> 
> 

---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to