In preparation to switching the jz4740 clk driver to the common clk framework
update the clk enable/disable calls to clk_prepare_enable/clk_disable_unprepare.
Signed-off-by: Lars-Peter Clausen <l...@metafoo.de>
---
drivers/mmc/host/jz4740_mmc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 2391c6b..2bc147f 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -626,7 +626,7 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct
mmc_ios *ios)
gpio_set_value(host->pdata->gpio_power,
!host->pdata->power_active_low);
host->cmdat |= JZ_MMC_CMDAT_INIT;
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk);
break;
case MMC_POWER_ON:
break;
@@ -634,7 +634,7 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct
mmc_ios *ios)
if (gpio_is_valid(host->pdata->gpio_power))
gpio_set_value(host->pdata->gpio_power,
host->pdata->power_active_low);
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
break;
}
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
