Initial version of Qualcomm SDHC has a hardware issue. This patch adds
a quirk SDHCI_QUIRK2_RDWR_TX_ACTIVE_EOT to enable a workaround.
Hardware issue: Read Transfer Active/ Write Transfer Active may be
not de-asserted after end of transaction.
Software workaround: Set Software Reset for DAT line in Software Reset
Register (Bit 2).
CC: Venkat Gopalakrishnan <venk...@codeaurora.org>
CC: Asutosh Das <asuto...@codeaurora.org>
CC: Sahitya Tummala <stumm...@codeaurora.org>
Signed-off-by: Georgi Djakov <gdja...@mm-sol.com>
---
drivers/mmc/host/sdhci.c | 3 +++
include/linux/mmc/sdhci.h | 2 ++
2 files changed, 5 insertions(+)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a78bd4f..57659fb 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2155,6 +2155,9 @@ static void sdhci_tasklet_finish(unsigned long param)
controllers do not like that. */
sdhci_reset(host, SDHCI_RESET_CMD);
sdhci_reset(host, SDHCI_RESET_DATA);
+ } else {
+ if (host->quirks2 & SDHCI_QUIRK2_RDWR_TX_ACTIVE_EOT)
+ sdhci_reset(host, SDHCI_RESET_DATA);
}
host->mrq = NULL;
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index e3c6a74..3783f4c 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -98,6 +98,8 @@ struct sdhci_host {
#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4)
/* Controller has a non-standard host control register */
#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5)
+/* Controller cannot de-assert Read/Write Transfer Active after transaction */
+#define SDHCI_QUIRK2_RDWR_TX_ACTIVE_EOT (1<<6)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
