On Fri, Sep 13, 2013 at 07:11:38PM +0800, Dong Aisheng wrote:
> This is needed for supporting ultra high speed cards like SD3.0 cards.
>
> Signed-off-by: Dong Aisheng <b29...@freescale.com>
> ---
> arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 5 ++++-
> arch/arm/boot/dts/imx6qdl.dtsi | 30
> ++++++++++++++++++++++++++++++
> 2 files changed, 34 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> index 1cbbc51..ff6f1e8 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> @@ -54,6 +54,7 @@
> fsl,pins = <
> MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
> MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000
> + MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
> >;
> };
> };
> @@ -74,8 +75,10 @@
> };
>
> &usdhc3 {
> - pinctrl-names = "default";
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> pinctrl-0 = <&pinctrl_usdhc3_1>;
> + pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
> cd-gpios = <&gpio6 15 0>;
> wp-gpios = <&gpio1 13 0>;
> status = "okay";
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index ccd55c2..cb17574 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -1184,6 +1184,36 @@
> >;
> };
>
> + pinctrl_usdhc3_1_100mhz:
> usdhc3grp-1-100mhz { /* 100Mhz */
> + fsl,pins = <
> +
> MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9
> +
> MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9
> +
> MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9
> +
> MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9
> +
> MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9
> +
> MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9
> +
> MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170B9
> +
> MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170B9
> +
> MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170B9
> +
> MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170B9
I commented in the previous review that we use lowercase for hex values
in device tree. It seems that you missed the comment. Since this patch
can be applied independently, I just fixed them up and applied it.
Shawn
> + >;
> + };
> +
> + pinctrl_usdhc3_1_200mhz:
> usdhc3grp-1-200mhz { /* 200Mhz */
> + fsl,pins = <
> +
> MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9
> +
> MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9
> +
> MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
> +
> MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
> +
> MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
> +
> MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
> +
> MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170F9
> +
> MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170F9
> +
> MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170F9
> +
> MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170F9
> + >;
> + };
> +
> pinctrl_usdhc3_2: usdhc3grp-2 {
> fsl,pins = <
>
> MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
> --
> 1.7.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
