Rather than declaring the frequency of the external clock, specify the
label of the clock such that the driver may determine the frequency on
its own.
Signed-off-by: Tim Kryger <tim.kry...@linaro.org>
Reviewed-by: Markus Mayer <markus.ma...@linaro.org>
Reviewed-by: Matt Porter <matt.por...@linaro.org>
---
arch/arm/boot/dts/bcm11351.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index c6464fb..ce65367 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -43,7 +43,7 @@
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e000000 0x1000>;
- clock-frequency = <13000000>;
+ clocks = <&uartb_clk>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -53,7 +53,7 @@
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e001000 0x1000>;
- clock-frequency = <13000000>;
+ clocks = <&uartb2_clk>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -63,7 +63,7 @@
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e002000 0x1000>;
- clock-frequency = <13000000>;
+ clocks = <&uartb3_clk>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -73,7 +73,7 @@
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e003000 0x1000>;
- clock-frequency = <13000000>;
+ clocks = <&uartb4_clk>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
--
1.8.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
