On 16.07.2013 09:38, Shawn Guo wrote:
Hi Dirk,
On Tue, Jul 16, 2013 at 08:36:11AM +0200, Dirk Behme wrote:
In case of SDHCI_TIMEOUT_CONTROL write only 4 bits and not the
whole byte to avoid touching other unrelated bits in the i.MX6
SYS_CTRL register. E.g. IPP_RST_N shouldn't be touched accidently.
Signed-off-by: Dirk Behme <dirk.be...@de.bosch.com>
Acked-by: Shawn Guo <shawn....@linaro.org>
What's the status of this? I can't find it e.g. in linux-next?
Does anybody like to help to apply this?
Many thanks and best regards
Dirk
---
drivers/mmc/host/sdhci-esdhc-imx.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c
b/drivers/mmc/host/sdhci-esdhc-imx.c
index 1dd5ba8..1af3a2a 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -362,6 +362,18 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8
val, int reg)
esdhc_clrset_le(host, mask, new_val, reg);
return;
+ case SDHCI_TIMEOUT_CONTROL:
+ /*
+ * On i.MX6 the timeout value DTOCV is 4 bit large. Touch only
+ * these 4 bits (lower nibble of the byte), but not the upper
+ * nibble of the byte. The upper nibble of the byte contains
+ * IPP_RST_N which should keep the reset value, i.e. 1, and
+ * shouldn't be touched here.
+ */
+ if (is_imx6q_usdhc(imx_data)) {
+ esdhc_clrset_le(host, 0x0f, val, reg);
+ return;
+ }
}
esdhc_clrset_le(host, 0xff, val, reg);
--
1.8.2
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
