This patchset looks good to me. Acked-by: Jaehoon Chung <jh80.ch...@samsung.com>
Best Regards, Jaehoon Chung On 01/09/2014 11:35 PM, Zhangfei Gao wrote: > v7: > 0002: > use undefined local value in suspend/resume > > v6: > 0002: > Jaehoon pointed HIGHSPEED cap can be omitted if supports-highspeed is defined. > Seungwon mentioned clk operation should be called after suspend. > Remove k3_dwmmc_caps > > V5: > 0002: > Follow advice from Arnd, > Update dt descirption and use of_property_for_each_u32 to get table number. > > v4: > Follow Arnd's suggestion abstracting specific tuning to clock, > also because new version ip use different method and not use same tuning > registers. > > 0001 acked by Jaehoon > > v3: > 0001: > Put set/clear_bit DW_MMC_CARD_PRESENT in dw_mci_get_cd, > Since dw_mci_request will check DW_MMC_CARD_PRESENT before sending cmd > > 0002: > Follow suggestion from Chris, Kumar and Seungwon > Sync to latest mmc-next, which is 3.12-rc2 > Remove enum dw_mci_k3_type etc > > v2: > Follow Jaehoon's suggestion > Use slot-gpio.c handle cd pin > Move table out to dts > other suggestion > > > Zhangfei Gao (3): > mmc: dw_mmc: use slot-gpio to handle cd pin > mmc: dw_mmc: add dw_mmc-k3 for k3 platform > clk: hisilicon: add hi3620_mmc_clks > > .../bindings/arm/hisilicon/hisilicon.txt | 14 ++ > .../devicetree/bindings/clock/hi3620-clock.txt | 1 + > .../devicetree/bindings/mmc/k3-dw-mshc.txt | 60 +++++ > drivers/clk/hisilicon/clk-hi3620.c | 262 > ++++++++++++++++++++ > drivers/mmc/host/Kconfig | 10 + > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/dw_mmc-k3.c | 126 ++++++++++ > drivers/mmc/host/dw_mmc.c | 48 +++- > include/dt-bindings/clock/hi3620-clock.h | 5 + > 9 files changed, 514 insertions(+), 13 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt > create mode 100644 drivers/mmc/host/dw_mmc-k3.c > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
