Rather than reading back the timing information from the registers,
cache it locally. This allows implementations to translate the UHS
timing by overriding the set_uhs_signaling() method as required
without also having to emulate the SDHCI_HOST_CONTROL2 register.
Signed-off-by: Russell King <rmk+ker...@arm.linux.org.uk>
=-DO NOT APPLY-=
drivers/mmc/host/sdhci.c | 23 ++++++++++++-----------
include/linux/mmc/sdhci.h | 2 ++
2 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index d7e142ea55ef..01eed75d9404 100644
=-DO NOT APPLY-= a/drivers/mmc/host/sdhci.c
=+DO NOT APPLY+= b/drivers/mmc/host/sdhci.c
@@ -1083,24 +1083,23 @@ static void sdhci_finish_command(struct sdhci_host
*host)
static u16 sdhci_get_preset_value(struct sdhci_host *host)
{
- u16 ctrl, preset = 0;
=+DO NOT APPLY+= u16 preset = 0;
- ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-
- switch (ctrl & SDHCI_CTRL_UHS_MASK) {
- case SDHCI_CTRL_UHS_SDR12:
=+DO NOT APPLY+= switch (host->timing) {
=+DO NOT APPLY+= case MMC_TIMING_UHS_SDR12:
preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
break;
- case SDHCI_CTRL_UHS_SDR25:
=+DO NOT APPLY+= case MMC_TIMING_UHS_SDR25:
preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR25);
break;
- case SDHCI_CTRL_UHS_SDR50:
=+DO NOT APPLY+= case MMC_TIMING_UHS_SDR50:
preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR50);
break;
- case SDHCI_CTRL_UHS_SDR104:
=+DO NOT APPLY+= case MMC_TIMING_UHS_SDR104:
=+DO NOT APPLY+= case MMC_TIMING_MMC_HS200:
preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR104);
break;
- case SDHCI_CTRL_UHS_DDR50:
=+DO NOT APPLY+= case MMC_TIMING_UHS_DDR50:
preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50);
break;
default:
@@ -1530,6 +1529,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host,
struct mmc_ios *ios)
}
host->ops->set_uhs_signaling(host, ios->timing);
=+DO NOT APPLY+= host->timing = ios->timing;
if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
((ios->timing == MMC_TIMING_UHS_SDR12) ||
@@ -1828,12 +1828,13 @@ static int sdhci_execute_tuning(struct mmc_host *mmc,
u32 opcode)
* If the Host Controller supports the HS200 mode then the
* tuning function has to be executed.
*/
- if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR50) &&
=+DO NOT APPLY+= if (host->timing == MMC_TIMING_UHS_SDR50 &&
(host->flags & SDHCI_SDR50_NEEDS_TUNING ||
host->flags & SDHCI_SDR104_NEEDS_TUNING))
requires_tuning_nonuhs = true;
- if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR104) ||
=+DO NOT APPLY+= if (host->timing == MMC_TIMING_MMC_HS200 ||
=+DO NOT APPLY+= host->timing == MMC_TIMING_UHS_SDR104 ||
requires_tuning_nonuhs)
ctrl |= SDHCI_CTRL_EXEC_TUNING;
else {
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 20daa39e3a68..54fff6156d1b 100644
=-DO NOT APPLY-= a/include/linux/mmc/sdhci.h
=+DO NOT APPLY+= b/include/linux/mmc/sdhci.h
@@ -170,6 +170,8 @@ struct sdhci_host {
unsigned int ocr_avail_mmc;
u32 ocr_mask; /* available voltages */
=+DO NOT APPLY+= unsigned timing; /* Current
timing */
=+DO NOT APPLY+=
u32 thread_isr;
/* cached registers */
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
