sdhci has support for using GPIOs for card detection. If we have a
GPIO specified, we can use that directly, without needing our own
interrupt handler.
Signed-off-by: Russell King <rmk+ker...@arm.linux.org.uk>
---
drivers/mmc/host/sdhci-spear.c | 78 +++++++++---------------------------------
1 file changed, 16 insertions(+), 62 deletions(-)
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 00a73b1a6444..af3338fb0762 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -43,28 +43,6 @@ static const struct sdhci_ops sdhci_pltfm_ops = {
.set_uhs_signaling = sdhci_set_uhs_signaling,
};
-/* gpio card detection interrupt handler */
-static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id)
-{
- struct platform_device *pdev = dev_id;
- struct sdhci_host *host = platform_get_drvdata(pdev);
- struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
- unsigned long gpio_irq_type;
- int val;
-
- val = gpio_get_value(sdhci->data->card_int_gpio);
-
- /* val == 1 -> card removed, val == 0 -> card inserted */
- /* if card removed - set irq for low level, else vice versa */
- gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
- irq_set_irq_type(irq, gpio_irq_type);
-
- /* inform sdhci driver about card insertion/removal */
- tasklet_schedule(&host->card_tasklet);
-
- return IRQ_HANDLED;
-}
-
#ifdef CONFIG_OF
static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device
*pdev)
{
@@ -157,6 +135,22 @@ static int sdhci_probe(struct platform_device *pdev)
sdhci->data = dev_get_platdata(&pdev->dev);
}
+ /*
+ * It is optional to use GPIOs for sdhci card detection. If
+ * sdhci->data is NULL, then use original sdhci lines otherwise
+ * GPIO lines. We use the built-in GPIO support for this.
+ */
+ if (sdhci->data && sdhci->data->card_int_gpio >= 0) {
+ ret = mmc_gpio_request_cd(host->mmc,
+ sdhci->data->card_int_gpio, 0);
+ if (ret < 0) {
+ dev_dbg(&pdev->dev,
+ "failed to request card-detect gpio%d\n",
+ sdhci->data->card_int_gpio);
+ goto disable_clk;
+ }
+ }
+
ret = sdhci_add_host(host);
if (ret) {
dev_dbg(&pdev->dev, "error adding host\n");
@@ -165,48 +159,8 @@ static int sdhci_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, host);
- /*
- * It is optional to use GPIOs for sdhci Power control & sdhci card
- * interrupt detection. If sdhci->data is NULL, then use original sdhci
- * lines otherwise GPIO lines.
- * If GPIO is selected for power control, then power should be disabled
- * after card removal and should be enabled when card insertion
- * interrupt occurs
- */
- if (!sdhci->data)
- return 0;
-
- if (sdhci->data->card_int_gpio >= 0) {
- ret = devm_gpio_request(&pdev->dev, sdhci->data->card_int_gpio,
- "sdhci");
- if (ret < 0) {
- dev_dbg(&pdev->dev, "gpio request fail: %d\n",
- sdhci->data->card_int_gpio);
- goto set_drvdata;
- }
-
- ret = gpio_direction_input(sdhci->data->card_int_gpio);
- if (ret) {
- dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
- sdhci->data->card_int_gpio);
- goto set_drvdata;
- }
- ret = devm_request_irq(&pdev->dev,
- gpio_to_irq(sdhci->data->card_int_gpio),
- sdhci_gpio_irq, IRQF_TRIGGER_LOW,
- mmc_hostname(host->mmc), pdev);
- if (ret) {
- dev_dbg(&pdev->dev, "gpio request irq fail: %d\n",
- sdhci->data->card_int_gpio);
- goto set_drvdata;
- }
-
- }
-
return 0;
-set_drvdata:
- sdhci_remove_host(host, 1);
disable_clk:
clk_disable_unprepare(sdhci->clk);
err_host:
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
