This is a preparation for the am335x workaround where we reconfigure
dat1 as GPIO before going to suspend. If you don't specify active/idle
pinctrl there should be no change.
Idea of remuxing the pins by Tony Lindgren as well as the intial
implementation of omap_hsmmc_pin_init. All bugs are mine.
Signed-off-by: Andreas Fenkart <afenk...@gmail.com>
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index bd3bb0c..5e60925 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -220,6 +220,8 @@ struct omap_hsmmc_host {
#define HSMMC_SDIO_IRQ_ENABLED (1 << 0) /* SDIO irq enabled */
struct omap_hsmmc_next next_data;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *fixed, *active, *idle;
struct omap_mmc_platform_data *pdata;
};
@@ -476,6 +478,70 @@ static void omap_hsmmc_gpio_free(struct
omap_mmc_platform_data *pdata)
gpio_free(pdata->slots[0].switch_pin);
}
+static int omap_hsmmc_pin_init(struct omap_hsmmc_host *host)
+{
+ struct pinctrl *_pinctrl;
+ int ret;
+
+ _pinctrl = devm_pinctrl_get(host->dev);
+ if (IS_ERR(_pinctrl)) {
+ /* okay, if the bootloader set it up right */
+ dev_warn(host->dev, "no pinctrl handle\n");
+ return 0;
+ }
+
+ host->fixed = pinctrl_lookup_state(_pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(host->fixed)) {
+ dev_info(host->dev,
+ "pins are not configured from the driver\n");
+ host->fixed = NULL;
+ devm_pinctrl_put(_pinctrl);
+ return 0;
+ }
+
+ ret = pinctrl_select_state(_pinctrl, host->fixed);
+ if (ret < 0) {
+ dev_warn(host->dev, "select fixed pinctrl state failed %d\n",
ret);
+ goto err;
+ }
+
+ /* For most cases we don't have wake-ups, and exit after this */
+ host->active = pinctrl_lookup_state(_pinctrl, "active");
+ if (IS_ERR(host->active)) {
+ ret = PTR_ERR(host->active);
+ host->active = NULL;
+ goto done;
+ }
+
+ host->idle = pinctrl_lookup_state(_pinctrl, PINCTRL_STATE_IDLE);
+ if (IS_ERR(host->idle)) {
+ ret = PTR_ERR(host->idle);
+ host->idle = NULL;
+ goto err;
+ }
+
+ /* Let's make sure the active and idle states work */
+ ret = pinctrl_select_state(_pinctrl, host->idle);
+ if (ret < 0)
+ goto err;
+
+ ret = pinctrl_select_state(_pinctrl, host->active);
+ if (ret < 0)
+ goto err;
+
+ dev_info(mmc_dev(host->mmc), "pins configured for wake-up events\n");
+
+done:
+ host->pinctrl = _pinctrl;
+ return 0;
+
+err:
+ dev_err(mmc_dev(host->mmc), "pins configuration error: %i\n", ret);
+ devm_pinctrl_put(_pinctrl);
+ return ret;
+}
+
/*
* Start clock to the card
*/
@@ -1858,7 +1924,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
const struct of_device_id *match;
dma_cap_mask_t mask;
unsigned tx_req, rx_req;
- struct pinctrl *pinctrl;
apply_clk_hack(&pdev->dev);
@@ -2083,10 +2148,9 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
omap_hsmmc_disable_irq(host);
- pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
- if (IS_ERR(pinctrl))
- dev_warn(&pdev->dev,
- "pins are not configured from the driver\n");
+ ret = omap_hsmmc_pin_init(host);
+ if (ret)
+ goto err_pinctrl_state;
/*
* For now, only support SDIO interrupt if we are booted with
@@ -2127,7 +2191,11 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
err_slot_name:
mmc_remove_host(mmc);
- free_irq(mmc_slot(host).card_detect_irq, host);
+ if (host->pinctrl)
+ devm_pinctrl_put(host->pinctrl);
+err_pinctrl_state:
+ if ((mmc_slot(host).card_detect_irq))
+ free_irq(mmc_slot(host).card_detect_irq, host);
err_irq_cd:
if (host->use_reg)
omap_hsmmc_reg_put(host);
@@ -2179,6 +2247,8 @@ static int omap_hsmmc_remove(struct platform_device *pdev)
dma_release_channel(host->tx_chan);
if (host->rx_chan)
dma_release_channel(host->rx_chan);
+ if (host->pinctrl)
+ devm_pinctrl_put(host->pinctrl);
pm_runtime_put_sync(host->dev);
pm_runtime_disable(host->dev);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
