On Fri, May 30, 2014 at 03:40:56AM -0700, Kuninori Morimoto wrote:
> From: Kuninori Morimoto <kuninori.morimoto...@renesas.com>
>
> Basically, SD_BUF0 Tx/Rx addresses are same
> in normal TMIO controller,
> but, it is different on Renesas R-Car SDHI controller
> if it uses DMAC
> (Rx address needs to add 0x2000 to Tx address)
>
> This patch adds new .dma_rx_offset and cares it
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto...@renesas.com>
> ---
> drivers/mmc/host/sh_mobile_sdhi.c | 3 +++
> drivers/mmc/host/tmio_mmc_dma.c | 2 +-
> include/linux/mfd/tmio.h | 1 +
> 3 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sh_mobile_sdhi.c
> b/drivers/mmc/host/sh_mobile_sdhi.c
> index b3baa83..91c6399 100644
> --- a/drivers/mmc/host/sh_mobile_sdhi.c
> +++ b/drivers/mmc/host/sh_mobile_sdhi.c
> @@ -39,6 +39,7 @@ struct sh_mobile_sdhi_of_data {
> unsigned long tmio_flags;
> unsigned long capabilities;
> unsigned long capabilities2;
> + dma_addr_t dma_rx_offset;
> };
>
> static const struct sh_mobile_sdhi_of_data sh_mobile_sdhi_of_cfg[] = {
> @@ -56,6 +57,7 @@ static const struct sh_mobile_sdhi_of_data
> of_rcar_gen2_compatible = {
> .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
> .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
> .capabilities2 = MMC_CAP2_NO_2BLKS_READ,
> + .dma_rx_offset = 0x2000,
> };
>
> static const struct of_device_id sh_mobile_sdhi_of_match[] = {
> @@ -228,6 +230,7 @@ static int sh_mobile_sdhi_probe(struct platform_device
> *pdev)
> mmc_data->flags |= of_data->tmio_flags;
> mmc_data->capabilities |= of_data->capabilities;
> mmc_data->capabilities2 |= of_data->capabilities2;
> + dma_priv->dma_rx_offset = of_data->dma_rx_offset;
> }
>
> /* SD control register space size is 0x100, 0x200 for bus_shift=1 */
> diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c
> index 03e7b28..1925170 100644
> --- a/drivers/mmc/host/tmio_mmc_dma.c
> +++ b/drivers/mmc/host/tmio_mmc_dma.c
> @@ -311,7 +311,7 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host,
> struct tmio_mmc_data *pdat
> if (pdata->dma->chan_priv_rx)
> cfg.slave_id = pdata->dma->slave_id_rx;
> cfg.direction = DMA_DEV_TO_MEM;
> - cfg.src_addr = cfg.dst_addr;
> + cfg.src_addr = cfg.dst_addr + pdata->dma->dma_rx_offset;
> cfg.dst_addr = 0;
> ret = dmaengine_slave_config(host->chan_rx, &cfg);
> if (ret < 0)
Ok, this is a useful fix. We did it by adding an option to specify
the DMA address in the DT.
Acked-by: Ben Dooks <ben-li...@fluff.org>
--
Ben Dooks, b...@fluff.org, http://www.fluff.org/ben/
Large Hadron Colada: A large Pina Colada that makes the universe disappear.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
