On 18 August 2014 14:36, Geert Uytterhoeven <ge...@linux-m68k.org> wrote: > Hi Ian, > > On Fri, Aug 15, 2014 at 2:49 PM, Ian Molton <ian.mol...@codethink.co.uk> > wrote: >> On Thu, 14 Aug 2014 17:23:53 +0200 >> Geert Uytterhoeven <geert+rene...@glider.be> wrote: >> >>> On R-Car Gen 2, the SDHI registers cannot be accessed while the SDHI >>> module clock is disabled. Doing so will cause a lock-up. >>> >>> When suspending, enable the module clock before disabling the SDHI >>> interrupts, and disable the clock again afterwards. >> >> This feels wrong. Why can't interrupts be disabled prior to turning the >> clock off? > > The clock is handled by runtime PM. So if SDHI becomes idle, the clock > is turned off. > However, the card insertion interrupt is still enabled. > If all interrupts would be disabled when the clock is turned off, I believe > card > insertion can no longer be detected. > > BTW, I'm still wondering why tmio_mmc_host_resume() works without > enabling the clock, as it calls tmio_mmc_enable_dma(), which also writes to > an SDHI register (CTL_DMA_ENABLE).
A while ago, I tried to rework the runtime PM handling of tmio. http://www.spinics.net/lists/linux-mmc/msg23177.html The hole set never got merged, due to that we couldn't get them tested on hardware and there were a lack in review. We might want to pick them up to see if those may solve our problem. :-) Kind regards Uffe > >>> This fixes suspend and resume on r8a7791/koelsch. >>> >>> Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be> >>> --- >>> drivers/mmc/host/tmio_mmc_pio.c | 10 ++++++++++ >>> 1 file changed, 10 insertions(+) >>> >>> diff --git a/drivers/mmc/host/tmio_mmc_pio.c >>> b/drivers/mmc/host/tmio_mmc_pio.c >>> index faf0924e71cb..83192420a7e3 100644 >>> --- a/drivers/mmc/host/tmio_mmc_pio.c >>> +++ b/drivers/mmc/host/tmio_mmc_pio.c >>> @@ -1147,8 +1147,18 @@ int tmio_mmc_host_suspend(struct device *dev) >>> { >>> struct mmc_host *mmc = dev_get_drvdata(dev); >>> struct tmio_mmc_host *host = mmc_priv(mmc); >>> + struct tmio_mmc_data *pdata = host->pdata; >>> + >>> + if (pdata->clk_enable) { >>> + unsigned int f; >>> + pdata->clk_enable(host->pdev, &f); >>> + } >>> >>> tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL); >>> + >>> + if (pdata->clk_disable) >>> + pdata->clk_disable(host->pdev); >>> + >>> return 0; >>> } >>> EXPORT_SYMBOL(tmio_mmc_host_suspend); >>> -- >>> 1.9.1 > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- > ge...@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like > that. > -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html