On 24/10/14 15:46, Johan Rudholm wrote:
> The steps performed in mmc_do_hw_reset for eMMC:s after the hardware
> reset are very similar to those performed by mmc_power_up, so do a call
They perform different functions. mmc_power_up() does nothing if the card
is powered up. To share the common code you need to create a function for
the common functionality which is setting the initial state e.g.
int mmc_set_initial_state(struct mmc_host *host)
{
...
}
And call that from mmc_do_hw_reset and mmc_power_up.
> to this function instead.
>
> Signed-off-by: Johan Rudholm <joha...@axis.com>
> ---
> drivers/mmc/core/core.c | 11 +----------
> 1 files changed, 1 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index 5d215ee..d56e222 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -2273,16 +2273,7 @@ static int mmc_do_hw_reset(struct mmc_host *host, int
> check)
> }
> }
>
> - if (mmc_host_is_spi(host)) {
> - host->ios.chip_select = MMC_CS_HIGH;
> - host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
> - } else {
> - host->ios.chip_select = MMC_CS_DONTCARE;
> - host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
> - }
> - host->ios.bus_width = MMC_BUS_WIDTH_1;
> - host->ios.timing = MMC_TIMING_LEGACY;
> - mmc_set_ios(host);
> + mmc_power_up(host, card->ocr);
>
> mmc_host_clk_release(host);
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
