Hi Doug
On 12/03/2014 09:36 AM, Doug Anderson wrote:
> Jaehoon,
>
> On Tue, Dec 2, 2014 at 4:17 PM, Jaehoon Chung <jh80.ch...@samsung.com> wrote:
>>> @@ -1245,27 +1246,37 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
>>> return present;
>>> }
>>>
>>> -/*
>>> - * Disable lower power mode.
>>> - *
>>> - * Low power mode will stop the card clock when idle. According to the
>>> - * description of the CLKENA register we should disable low power mode
>>> - * for SDIO cards if we need SDIO interrupts to work.
>>> - *
>>> - * This function is fast if low power mode is already disabled.
>>> - */
>>> -static void dw_mci_disable_low_power(struct dw_mci_slot *slot)
>>> +static void dw_mci_init_card(struct mmc_host *mmc, struct mmc_card *card)
>>> {
>>> + struct dw_mci_slot *slot = mmc_priv(mmc);
>>> struct dw_mci *host = slot->host;
>>> - u32 clk_en_a;
>>> - const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
>>>
>>> - clk_en_a = mci_readl(host, CLKENA);
>>> + /*
>>> + * Low power mode will stop the card clock when idle. According to
>>> the
>>> + * description of the CLKENA register we should disable low power mode
>>> + * for SDIO cards if we need SDIO interrupts to work.
>>> + */
>>> + if (mmc->caps & MMC_CAP_SDIO_IRQ) {
>>> + const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
>>> + u32 clk_en_a_old;
>>> + u32 clk_en_a;
>>>
>>> - if (clk_en_a & clken_low_pwr) {
>>> - mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr);
>>> - mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
>>> - SDMMC_CMD_PRV_DAT_WAIT, 0);
>>> + clk_en_a_old = mci_readl(host, CLKENA);
>>> +
>>> + if (card->type == MMC_TYPE_SDIO ||
>>> + card->type == MMC_TYPE_SD_COMBO) {
>>> + set_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
>>> + clk_en_a = clk_en_a_old & ~clken_low_pwr;
>>> + } else {
>>
>> I wonder this point. When entered at this point?
>>
>> MMC_CAP_SDIO_IRQ is sdio capability. and card->type is also related with
>> SDIO, isn't?
>
> Right. As I understand it:
>
> * You can certainly add MMC_CAP_SDIO_IRQ to an external card slot that
> might have an MMC card, and SD card, or an SDIO card. You still want
> the LOW_PWR mode for MMC/SD cards but don't want it for SDIO cards in
> that case.
Ok, I understood your purpose.
Your mean is MMC_CAP_SIDO_IRQ can be set to MMC or SD...not only SDIO card.
It's reasonable.
But i think it doesn't need to set LOW_PWR_mode for SD/eMMC at here. it should
be already set to Low-power mode.
And SDIO case should not enter at here.
>
> * If you don't set MMC_CAP_SDIO_IRQ then presumably you've got some
> problem where the SDIO interrupt is broken on your board. That means
> you're using polling mode to find interrupts. As I understand it that
> would allow you to use LOW_PWR since you don't need to detect SDIO
> interrupts. I know on Marvell WiFi modules I tested this seemed to
> work OK, but I doubt anyone is really running a production device in
> this way.
No, we needs to set MMC_CAP_SDIO_IRQ, if i didn't set to it, i will also see
the problem.
Since I knew which slot is used as SDIO card, i thought MMC_CAP_SDIO_IRQ is set
for only sdio card.
Then it would be check the twice whether card is SDIO or not.
Actually, i didn't test WiFi module with this patch. but concept is not problem.
Best Regards,
Jaehoon Chung
>
>
> Basically I was trying to mirror the functionality of the old code as
> closely as possible. In the old code if you were using polling mode
> then dw_mci_enable_sdio_irq() should never be called and you'd never
> go out of low power mode.
>
> -Doug
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
