Hi.
On 12/10/2014 06:30 AM, Alim Akhtar wrote:
> Hi Ulf
>
> On Mon, Dec 8, 2014 at 3:40 PM, Ulf Hansson <ulf.hans...@linaro.org> wrote:
>> On 6 December 2014 at 13:43, Alim Akhtar <alim.akh...@gmail.com> wrote:
>>> Hi Ulf,
>>>
>>> On Fri, Dec 5, 2014 at 5:29 PM, Ulf Hansson <ulf.hans...@linaro.org> wrote:
>>>> Instead of having a local hack taking care of sending the tuning
>>>> command and as well to verify the response pattern, let's convert to
>>>> the common mmc_send_tuning() API.
>>>>
>>>> This change affects the Exynos variant, since it's the only one which
>>>> support the dw_mmc's ->execute_tuning() callback.
>>>>
>>>> Signed-off-by: Ulf Hansson <ulf.hans...@linaro.org>
>>>> ---
>>>>
>>
>> Alim, thanks for helping out testing!
>>
> Sorry for the delay but currently I don't have access to my work station.
> And thanks for quick suggested patch, I will test this as soon asI go
> back to my work.
>
> Hi Jaehoon, can you test this and the original patch for hs200 on
> exynos? Just to confirm my board is not the special one.
> Thanks.
Does it need to send "stop command" at exynos5800?
Well, most SoC doesn't need to send stop command, also exynos.
But i will check other exynos boards..then i will share result.
Best Regards,
Jaehoon Chung
>
>>> With this change HS200 mode does not work on exynos5800 peach-pi board.
>>> I got below error while testing this series:
>>>
>>> mmc0: tuning execution failed
>>> mmc0: error -5 whilst initialising MMC card
>>>
>>> Though, your's next branch with commit _a1d06b4_ works fine in HS200 mode.
>>
>> I was looking into the details of what change my patchset introduces
>> for dw_mmc-exynos. Apparently, dw_mmc-exynos was using the
>> MMC_STOP_TRANSMISSION to end the tuning reqeust (CMD21/19). The new
>> mmc_send_tuning() API doesn't, which also conforms to what the eMMC/SD
>> specifications states.
>>
>> Do you have any idea of why dw_mmc-exynos was using
>> MMC_STOP_TRANSMISSION for CMD19/21?
>>
>> To see if my theory is correct, could you try out the following patch
>> on top of $subject patch?
>> BTW, I have queued patch 1 and 2, from this patchset available on my
>> next branch.
>>
>>
>> From e1ac35bb0e90254275ec7088f41e6e2d59e48367 Mon Sep 17 00:00:00 2001
>> From: Ulf Hansson <ulf.hans...@linaro.org>
>> Date: Mon, 8 Dec 2014 10:58:48 +0100
>> Subject: [PATCH] mmc: core: End tuning request with stop command
>>
>> Not to be merged!
>>
>> This patch adds the MMC_STOP_TRANSMISSION command to end a tuning
>> request. For some reason dw_mmc seems to need this to complete the
>> tuning request without errors.
>>
>> Signed-off-by: Ulf Hansson <ulf.hans...@linaro.org>
>> ---
>> drivers/mmc/core/mmc_ops.c | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
>> index 3b044c5..aa79e0c 100644
>> --- a/drivers/mmc/core/mmc_ops.c
>> +++ b/drivers/mmc/core/mmc_ops.c
>> @@ -551,6 +551,7 @@ int mmc_send_tuning(struct mmc_host *host)
>> {
>> struct mmc_request mrq = {NULL};
>> struct mmc_command cmd = {0};
>> + struct mmc_command stop = {0};
>> struct mmc_data data = {0};
>> struct scatterlist sg;
>> struct mmc_ios *ios = &host->ios;
>> @@ -576,10 +577,14 @@ int mmc_send_tuning(struct mmc_host *host)
>>
>> mrq.cmd = &cmd;
>> mrq.data = &data;
>> + mrq.stop = &stop;
>>
>> cmd.opcode = opcode;
>> cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
>>
>> + stop.opcode = MMC_STOP_TRANSMISSION;
>> + stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
>> +
>> data.blksz = size;
>> data.blocks = 1;
>> data.flags = MMC_DATA_READ;
>> --
>> 1.9.1
>>
>> Kind regards
>> Uffe
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
