From: weijun yang <york.y...@csr.com>
For the original tuning code, delay value is set to SD Bus Clock Delay
Register (SD_CLK_DELAY_SETTING) as (val | (Val << 7) | (val << 16)),
which means CLK_DELAY_IN1, CLK_DELAY_IN2 and CLK_DELAY_OUT are the
same and with 128 steps. This is doubtful. In CSR design specification
documents CS-304575-DR-3H, this issue is clarified, the delay[13:0] in
SD_CLK_DELAY_SETTING is simplied to the concatenation of {CLK_DELAY_IN2,
CLK_DELAY_IN1}.
Besides, for CMD19 tuning, no need to set CLK_DELAY_OUT([22,16]
of SD_CLK_DELAY_SETTING).
Signed-off-by: weijun yang <york.y...@csr.com>
Signed-off-by: Barry Song <baohua.s...@csr.com>
---
drivers/mmc/host/sdhci-sirf.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c
index f6f82ec..4331409 100644
--- a/drivers/mmc/host/sdhci-sirf.c
+++ b/drivers/mmc/host/sdhci-sirf.c
@@ -56,7 +56,7 @@ static int sdhci_sirf_execute_tuning(struct sdhci_host *host,
u32 opcode)
int tuning_seq_cnt = 3;
u8 phase, tuned_phases[SIRF_TUNING_COUNT];
u8 tuned_phase_cnt = 0;
- int rc, longest_range = 0;
+ int rc = 0, longest_range = 0;
int start = -1, end = 0, tuning_value = -1, range = 0;
u16 clock_setting;
struct mmc_host *mmc = host->mmc;
@@ -68,7 +68,7 @@ retry:
phase = 0;
do {
sdhci_writel(host,
- clock_setting | phase | (phase << 7) | (phase << 16),
+ clock_setting | phase,
SDHCI_CLK_DELAY_SETTING);
if (!mmc_send_tuning(mmc)) {
@@ -102,7 +102,7 @@ retry:
*/
phase = tuning_value;
sdhci_writel(host,
- clock_setting | phase | (phase << 7) | (phase << 16),
+ clock_setting | phase,
SDHCI_CLK_DELAY_SETTING);
dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
