Hi Kevin,
On 2/26/2015 11:47 PM, Kevin Hao wrote:
> Actually we can use the "clk" in the struct sdhci_pltfm_host. Also
> change the "external clock" to "core clock" and kill two redundant
> private functions in this driver as suggested by Ray Jui.
>
> Signed-off-by: Kevin Hao <haoke...@gmail.com>
> ---
> v2:
> - s/external clock/core clock/
> - kill the private functions sdhci_bcm_kona_get_max_clk() and
> sdhci_bcm_kona_get_timeout_clock()
>
> drivers/mmc/host/sdhci-bcm-kona.c | 46
> +++++++++++----------------------------
> 1 file changed, 13 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-bcm-kona.c
> b/drivers/mmc/host/sdhci-bcm-kona.c
> index 34bb8f92586e..5bc263b447b2 100644
> --- a/drivers/mmc/host/sdhci-bcm-kona.c
> +++ b/drivers/mmc/host/sdhci-bcm-kona.c
> @@ -54,7 +54,6 @@
>
> struct sdhci_bcm_kona_dev {
> struct mutex write_lock; /* protect back to back writes */
> - struct clk *external_clk;
> };
>
>
> @@ -175,24 +174,6 @@ static void sdhci_bcm_kona_card_event(struct sdhci_host
> *host)
> }
> }
>
> -/*
> - * Get the base clock. Use central clock source for now. Not sure if
> different
> - * clock speed to each dev is allowed
> - */
> -static unsigned int sdhci_bcm_kona_get_max_clk(struct sdhci_host *host)
> -{
> - struct sdhci_bcm_kona_dev *kona_dev;
> - struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host);
> - kona_dev = sdhci_pltfm_priv(pltfm_priv);
> -
> - return host->mmc->f_max;
> -}
> -
> -static unsigned int sdhci_bcm_kona_get_timeout_clock(struct sdhci_host *host)
> -{
> - return sdhci_bcm_kona_get_max_clk(host);
> -}
> -
> static void sdhci_bcm_kona_init_74_clocks(struct sdhci_host *host,
> u8 power_mode)
> {
> @@ -207,8 +188,8 @@ static void sdhci_bcm_kona_init_74_clocks(struct
> sdhci_host *host,
>
> static struct sdhci_ops sdhci_bcm_kona_ops = {
> .set_clock = sdhci_set_clock,
> - .get_max_clock = sdhci_bcm_kona_get_max_clk,
> - .get_timeout_clock = sdhci_bcm_kona_get_timeout_clock,
> + .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> + .get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
> .platform_send_init_74_clocks = sdhci_bcm_kona_init_74_clocks,
> .set_bus_width = sdhci_set_bus_width,
> .reset = sdhci_reset,
> @@ -264,21 +245,21 @@ static int sdhci_bcm_kona_probe(struct platform_device
> *pdev)
> goto err_pltfm_free;
> }
>
> - /* Get and enable the external clock */
> - kona_dev->external_clk = devm_clk_get(dev, NULL);
> - if (IS_ERR(kona_dev->external_clk)) {
> - dev_err(dev, "Failed to get external clock\n");
> - ret = PTR_ERR(kona_dev->external_clk);
> + /* Get and enable the core clock */
> + pltfm_priv->clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(pltfm_priv->clk)) {
> + dev_err(dev, "Failed to get core clock\n");
> + ret = PTR_ERR(pltfm_priv->clk);
> goto err_pltfm_free;
> }
>
> - if (clk_set_rate(kona_dev->external_clk, host->mmc->f_max) != 0) {
> - dev_err(dev, "Failed to set rate external clock\n");
> + if (clk_set_rate(pltfm_priv->clk, host->mmc->f_max) != 0) {
> + dev_err(dev, "Failed to set rate core clock\n");
> goto err_pltfm_free;
> }
>
> - if (clk_prepare_enable(kona_dev->external_clk) != 0) {
> - dev_err(dev, "Failed to enable external clock\n");
> + if (clk_prepare_enable(pltfm_priv->clk) != 0) {
> + dev_err(dev, "Failed to enable core clock\n");
> goto err_pltfm_free;
> }
>
> @@ -333,7 +314,7 @@ err_reset:
> sdhci_bcm_kona_sd_reset(host);
>
> err_clk_disable:
> - clk_disable_unprepare(kona_dev->external_clk);
> + clk_disable_unprepare(pltfm_priv->clk);
>
> err_pltfm_free:
> sdhci_pltfm_free(pdev);
> @@ -346,12 +327,11 @@ static int sdhci_bcm_kona_remove(struct platform_device
> *pdev)
> {
> struct sdhci_host *host = platform_get_drvdata(pdev);
> struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host);
> - struct sdhci_bcm_kona_dev *kona_dev = sdhci_pltfm_priv(pltfm_priv);
> int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
>
> sdhci_remove_host(host, dead);
>
> - clk_disable_unprepare(kona_dev->external_clk);
> + clk_disable_unprepare(pltfm_priv->clk);
>
> sdhci_pltfm_free(pdev);
>
>
The change looks good to me. Thanks!
Reviewed-by: Ray Jui <r...@broadcom.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
