On 7 April 2015 at 02:53, Fabio Estevam <feste...@gmail.com> wrote:
> From: Fabio Estevam <fabio.este...@freescale.com>
>
> Currently it is not possible to use 'mmc-pwrseq-simple' property with
> this driver because mmc_pwrseq_alloc() is never called.
>
> Call mmc_pwrseq_alloc so that we enable the support for providing a
> reset GPIO to the Wifi/BT chipset.
>
> Tested on a imx6sl-warp board:
>
> root@imx6sl-warp:~# hciattach /dev/ttymxc1 3wire
> Device setup complete
> root@imx6sl-warp:~# hciconfig hci0 up
> root@imx6sl-warp:~# hciconfig
> hci0:   Type: BR/EDR  Bus: UART
>         BD Address: 2A:23:AA:6E:C7:A0  ACL MTU: 1021:8  SCO MTU: 64:1
>         UP RUNNING
>         RX bytes:795 acl:0 sco:0 events:29 errors:0
>         TX bytes:613 acl:0 sco:0 commands:29 errors:0
>
> Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
> ---
> Changes since v1:
> - Calling mmc_of_parse() breaks some boards due to bad card detect parsing.
> Call only mmc_pwrseq_alloc() instead, which what we really need.

Why can't we fix the card detect parsing instead?

>
>  drivers/mmc/host/sdhci-esdhc-imx.c | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c 
> b/drivers/mmc/host/sdhci-esdhc-imx.c
> index 7ee8312..5bcabdc 100644
> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -31,6 +31,8 @@
>  #include "sdhci-pltfm.h"
>  #include "sdhci-esdhc.h"
>
> +#include "../core/pwrseq.h"

The pwrseq API was intentionally not exported. This is not the way to
include header files.

> +
>  #define        ESDHC_CTRL_D3CD                 0x08
>  /* VENDOR SPEC register */
>  #define ESDHC_VENDOR_SPEC              0xc0
> @@ -1079,6 +1081,10 @@ static int sdhci_esdhc_imx_probe(struct 
> platform_device *pdev)
>                 host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
>         }
>
> +       err = mmc_pwrseq_alloc(host->mmc);
> +       if (err)
> +               goto disable_clk;
> +
>         err = sdhci_add_host(host);
>         if (err)
>                 goto disable_clk;
> --
> 1.9.1
>

Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to