From: Weijun Yang <weijun.y...@csr.com>
hardware has 16bit to record the tuning count, so fix it to 16384.
at the same time, tuned_phases[SIRF_TUNING_COUNT] is useless as the
array is never used, so move it to a variant.
Signed-off-by: Weijun Yang <weijun.y...@csr.com>
Signed-off-by: Barry Song <baohua.s...@csr.com>
---
drivers/mmc/host/sdhci-sirf.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c
index 32848eb..2201f76 100644
--- a/drivers/mmc/host/sdhci-sirf.c
+++ b/drivers/mmc/host/sdhci-sirf.c
@@ -17,7 +17,7 @@
#define SDHCI_CLK_DELAY_SETTING 0x4C
#define SDHCI_SIRF_8BITBUS BIT(3)
-#define SIRF_TUNING_COUNT 128
+#define SIRF_TUNING_COUNT 16384
struct sdhci_sirf_priv {
int gpio_cd;
@@ -46,7 +46,7 @@ static void sdhci_sirf_set_bus_width(struct sdhci_host *host,
int width)
static int sdhci_sirf_execute_tuning(struct sdhci_host *host, u32 opcode)
{
int tuning_seq_cnt = 3;
- u8 phase, tuned_phases[SIRF_TUNING_COUNT];
+ int phase;
u8 tuned_phase_cnt = 0;
int rc = 0, longest_range = 0;
int start = -1, end = 0, tuning_value = -1, range = 0;
@@ -58,6 +58,7 @@ static int sdhci_sirf_execute_tuning(struct sdhci_host *host,
u32 opcode)
retry:
phase = 0;
+ tuned_phase_cnt = 0;
do {
sdhci_writel(host,
clock_setting | phase,
@@ -65,7 +66,7 @@ retry:
if (!mmc_send_tuning(mmc)) {
/* Tuning is successful at this tuning point */
- tuned_phases[tuned_phase_cnt++] = phase;
+ tuned_phase_cnt++;
dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
mmc_hostname(mmc), phase);
if (start == -1)
@@ -85,7 +86,7 @@ retry:
start = -1;
end = range = 0;
}
- } while (++phase < ARRAY_SIZE(tuned_phases));
+ } while (++phase < SIRF_TUNING_COUNT);
if (tuned_phase_cnt && tuning_value > 0) {
/*
--
2.3.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
