This is an incremental fix of commit
e62bd351b("mmc: sdhci-esdhc-imx: Do not break platform data boards").
After commit 8d86e4fcccf6 ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"),
we do not need to run the check of boarddata->wp_type/cd_type/max_bus_width
again for dt platform since those are already handled by mmc_of_parse().
Current code only exclude the checking of wp_type for dt platform which
does not make sense.
This patch moves all non dt probe code into one function.
Besides, since we only support SD3.0/eMMC HS200 for dt platform, the
support_vsel checking and ultra high speed pinctrl state are also merged
into sdhci_esdhc_imx_probe_dt.
Then we have two separately probe function for dt and non dt type.
This can make the driver probe more clearly.
Signed-off-by: Dong Aisheng <aisheng.d...@freescale.com>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 179 +++++++++++++++++++------------------
1 file changed, 94 insertions(+), 85 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c
b/drivers/mmc/host/sdhci-esdhc-imx.c
index 4815391..10f03ee 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -878,14 +878,12 @@ static const struct sdhci_pltfm_data
sdhci_esdhc_imx_pdata = {
static int
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
struct sdhci_host *host,
- struct esdhc_platform_data *boarddata)
+ struct pltfm_imx_data *imx_data)
{
struct device_node *np = pdev->dev.of_node;
+ struct esdhc_platform_data *boarddata = &imx_data->boarddata;
int ret;
- if (!np)
- return -ENODEV;
-
if (of_get_property(np, "non-removable", NULL))
boarddata->cd_type = ESDHC_CD_PERMANENT;
@@ -917,6 +915,26 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
mmc_of_parse_voltage(np, &host->ocr_mask);
+ /* sdr50 and sdr104 needs work on 1.8v signal voltage */
+ if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) &&
+ !IS_ERR(imx_data->pins_default)) {
+ imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
+ ESDHC_PINCTRL_STATE_100MHZ);
+ imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
+ ESDHC_PINCTRL_STATE_200MHZ);
+ if (IS_ERR(imx_data->pins_100mhz) ||
+ IS_ERR(imx_data->pins_200mhz)) {
+ dev_warn(mmc_dev(host->mmc),
+ "could not get ultra high speed state, work on
normal mode\n");
+ /*
+ * fall back to not support uhs by specify no 1.8v quirk
+ */
+ host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
+ }
+ } else {
+ host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
+ }
+
/* call to generic mmc_of_parse to support additional capabilities */
ret = mmc_of_parse(host->mmc);
if (ret)
@@ -931,22 +949,85 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
static inline int
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
struct sdhci_host *host,
- struct esdhc_platform_data *boarddata)
+ struct pltfm_imx_data *imx_data)
{
return -ENODEV;
}
#endif
+static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev,
+ struct sdhci_host *host,
+ struct pltfm_imx_data *imx_data)
+{
+ struct esdhc_platform_data *boarddata = &imx_data->boarddata;
+ int err;
+
+ if (!host->mmc->parent->platform_data) {
+ dev_err(mmc_dev(host->mmc), "no board data!\n");
+ return -EINVAL;
+ }
+
+ imx_data->boarddata = *((struct esdhc_platform_data *)
+ host->mmc->parent->platform_data);
+ /* write_protect */
+ if (boarddata->wp_type == ESDHC_WP_GPIO) {
+ err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
+ if (err) {
+ dev_err(mmc_dev(host->mmc),
+ "failed to request write-protect gpio!\n");
+ return err;
+ }
+ host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+ }
+
+ /* card_detect */
+ switch (boarddata->cd_type) {
+ case ESDHC_CD_GPIO:
+ err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0);
+ if (err) {
+ dev_err(mmc_dev(host->mmc),
+ "failed to request card-detect gpio!\n");
+ return err;
+ }
+ /* fall through */
+
+ case ESDHC_CD_CONTROLLER:
+ /* we have a working card_detect back */
+ host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+ break;
+
+ case ESDHC_CD_PERMANENT:
+ host->mmc->caps |= MMC_CAP_NONREMOVABLE;
+ break;
+
+ case ESDHC_CD_NONE:
+ break;
+ }
+
+ switch (boarddata->max_bus_width) {
+ case 8:
+ host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
+ break;
+ case 4:
+ host->mmc->caps |= MMC_CAP_4_BIT_DATA;
+ break;
+ case 1:
+ default:
+ host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+ break;
+ }
+
+ return 0;
+}
+
static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
of_match_device(imx_esdhc_dt_ids, &pdev->dev);
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_host *host;
- struct esdhc_platform_data *boarddata;
int err;
struct pltfm_imx_data *imx_data;
- bool dt = true;
host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata, 0);
if (IS_ERR(host))
@@ -1038,84 +1119,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device
*pdev)
if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536)
host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
- boarddata = &imx_data->boarddata;
- if (sdhci_esdhc_imx_probe_dt(pdev, host, boarddata) < 0) {
- if (!host->mmc->parent->platform_data) {
- dev_err(mmc_dev(host->mmc), "no board data!\n");
- err = -EINVAL;
- goto disable_clk;
- }
- imx_data->boarddata = *((struct esdhc_platform_data *)
- host->mmc->parent->platform_data);
- dt = false;
- }
- /* write_protect */
- if (boarddata->wp_type == ESDHC_WP_GPIO && !dt) {
- err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
- if (err) {
- dev_err(mmc_dev(host->mmc),
- "failed to request write-protect gpio!\n");
- goto disable_clk;
- }
- host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
- }
-
- /* card_detect */
- switch (boarddata->cd_type) {
- case ESDHC_CD_GPIO:
- if (dt)
- break;
- err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0);
- if (err) {
- dev_err(mmc_dev(host->mmc),
- "failed to request card-detect gpio!\n");
- goto disable_clk;
- }
- /* fall through */
-
- case ESDHC_CD_CONTROLLER:
- /* we have a working card_detect back */
- host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
- break;
-
- case ESDHC_CD_PERMANENT:
- host->mmc->caps |= MMC_CAP_NONREMOVABLE;
- break;
-
- case ESDHC_CD_NONE:
- break;
- }
-
- switch (boarddata->max_bus_width) {
- case 8:
- host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
- break;
- case 4:
- host->mmc->caps |= MMC_CAP_4_BIT_DATA;
- break;
- case 1:
- default:
- host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
- break;
- }
-
- /* sdr50 and sdr104 needs work on 1.8v signal voltage */
- if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) &&
- !IS_ERR(imx_data->pins_default)) {
- imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
- ESDHC_PINCTRL_STATE_100MHZ);
- imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
- ESDHC_PINCTRL_STATE_200MHZ);
- if (IS_ERR(imx_data->pins_100mhz) ||
- IS_ERR(imx_data->pins_200mhz)) {
- dev_warn(mmc_dev(host->mmc),
- "could not get ultra high speed state, work on
normal mode\n");
- /* fall back to not support uhs by specify no 1.8v
quirk */
- host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
- }
- } else {
- host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
- }
+ if (of_id)
+ err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data);
+ else
+ err = sdhci_esdhc_imx_probe_nondt(pdev, host, imx_data);
+ if (err)
+ goto disable_clk;
err = sdhci_add_host(host);
if (err)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
