From: Weijun Yang <york.y...@csr.com>
As SD Specifications Part1 Physical Layer Specification Version
3.01 says, CMD19 tuning is available for unlocked cards in transfer
state of 1.8V signaling mode. The small difference between v3.00
and 3.01 spec means that CMD19 tuning is also available for DDR50
mode.
Signed-off-by: Weijun Yang <york.y...@csr.com>
Signed-off-by: Barry Song <baohua.s...@csr.com>
---
drivers/mmc/core/sd.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 4e7366a..eaf8cb3 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -628,9 +628,24 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
* SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
*/
if (!mmc_host_is_spi(card->host) &&
- (card->sd_bus_speed == UHS_SDR50_BUS_SPEED ||
- card->sd_bus_speed == UHS_SDR104_BUS_SPEED))
+ (card->sd_bus_speed == UHS_SDR50_BUS_SPEED ||
+ card->sd_bus_speed == UHS_DDR50_BUS_SPEED ||
+ card->sd_bus_speed == UHS_SDR104_BUS_SPEED)) {
err = mmc_execute_tuning(card);
+
+ /*
+ * As SD Specifications Part1 Physical Layer Specification
Version
+ * 3.01 says, CMD19 tuning is available for unlocked cards in
transfer
+ * state of 1.8V signaling mode. The small difference between
v3.00
+ * and 3.01 spec means that CMD19 tuning is also available for
DDR50
+ * mode.
+ */
+ if (err && (card->sd_bus_speed == UHS_DDR50_BUS_SPEED)) {
+ pr_warn("%s: ddr50 tuning failed\n",
mmc_hostname(card->host));
+ err = 0;
+ }
+ }
+
out:
kfree(status);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
