Hi Marcin,
On Tue, 6 Oct 2015 03:22:38 +0200
Marcin Wojtas <m...@semihalf.com> wrote:
> When resuming from suspend on Armada 38x SoC MBus windows have to be
> re-configured and for that purpose mv_conf_mbus_windows function needed
> rework. MBus windows register base address obtaining was moved to
> armada_38x_quirks function in order to be kept in pxa global structure,
> because it is used during a resume.
>
> This commit fixes resuming from suspend by calling MBus windows
> configuration routine and therefore enabling proper DMA operation.
>
> Signed-off-by: Marcin Wojtas <m...@semihalf.com>
> ---
> drivers/mmc/host/sdhci-pxav3.c | 39 ++++++++++++++++++++-------------------
> 1 file changed, 20 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
> index f5edf9d..3f71894 100644
> --- a/drivers/mmc/host/sdhci-pxav3.c
> +++ b/drivers/mmc/host/sdhci-pxav3.c
> @@ -63,6 +63,7 @@ struct sdhci_pxa {
> struct clk *clk_io;
> u8 power_mode;
> void __iomem *sdio3_conf_reg;
> + void __iomem *mbus_win_regs;
> };
>
> /*
> @@ -81,30 +82,16 @@ struct sdhci_pxa {
> #define SDIO3_CONF_CLK_INV BIT(0)
> #define SDIO3_CONF_SD_FB_CLK BIT(2)
>
> -static int mv_conf_mbus_windows(struct platform_device *pdev,
> +static int mv_conf_mbus_windows(struct device *dev, void __iomem *regs,
> const struct mbus_dram_target_info *dram)
> {
> int i;
> - void __iomem *regs;
> - struct resource *res;
>
> if (!dram) {
> - dev_err(&pdev->dev, "no mbus dram info\n");
> - return -EINVAL;
> - }
> -
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> - if (!res) {
> - dev_err(&pdev->dev, "cannot get mbus registers\n");
> + dev_err(dev, "no mbus dram info\n");
> return -EINVAL;
> }
>
> - regs = ioremap(res->start, resource_size(res));
> - if (!regs) {
> - dev_err(&pdev->dev, "cannot map mbus registers\n");
> - return -ENOMEM;
> - }
> -
> for (i = 0; i < SDHCI_MAX_WIN_NUM; i++) {
> writel(0, regs + SDHCI_WINDOW_CTRL(i));
> writel(0, regs + SDHCI_WINDOW_BASE(i));
> @@ -122,8 +109,6 @@ static int mv_conf_mbus_windows(struct platform_device
> *pdev,
> writel(cs->base, regs + SDHCI_WINDOW_BASE(i));
> }
>
> - iounmap(regs);
> -
> return 0;
> }
>
> @@ -135,6 +120,14 @@ static int armada_38x_quirks(struct platform_device
> *pdev,
> struct sdhci_pxa *pxa = pltfm_host->priv;
> struct resource *res;
>
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mbus");
> + pxa->mbus_win_regs = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(pxa->mbus_win_regs)) {
> + dev_err(mmc_dev(host->mmc),
> + "failed to obtain MBus windows register base\n");
devm_ioremap_resource() has warned us if it fails, so is it better to remove
this dev_err() here?
> + return PTR_ERR(pxa->mbus_win_regs);
> + }
> +
> host->quirks &= ~SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
> host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
> res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> @@ -403,7 +396,8 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
> ret = armada_38x_quirks(pdev, host);
> if (ret < 0)
> goto err_mbus_win;
> - ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
> + ret = mv_conf_mbus_windows(&pdev->dev, pxa->mbus_win_regs,
> + mv_mbus_dram_info());
> if (ret < 0)
> goto err_mbus_win;
> }
> @@ -520,6 +514,13 @@ static int sdhci_pxav3_resume(struct device *dev)
> {
> int ret;
> struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_pxa *pxa = pltfm_host->priv;
> + struct device_node *np = dev->of_node;
> +
> + if (of_device_is_compatible(np, "marvell,armada-380-sdhci"))
this would increase resume time especially those non armada-380-sdhci host
although it's trivial. Is it better to check "if (pxa->mbus_win_regs)"?
> + ret = mv_conf_mbus_windows(dev, pxa->mbus_win_regs,
> + mv_mbus_dram_info());
>
> pm_runtime_get_sync(dev);
> ret = sdhci_resume_host(host);
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
